Scanner & linux

Salut,

J'ai installé une imprimante sous ma FC4. (HP PSC 1610 multifonctions)
La aucun pb. PAr contre je voudrais pouvoir scanner: donc j'ai suivi ceci

[url]http://www.bawet.org/article.php3?id_article=48[/url]
et j'ai essayer la deuxième méthode

Par contre je ne sais pas comment vérifier que les 3 démons sont actifs.


J'ai donc trouvé aussi cela

[url]http://guide.andesi.org/html/dscannerepson.html[/url]

J'ai fais exactement la meme chose, mais a chaque fois que je fais scanimage -L j'ai tjs le meme message:

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

[root@rjcserveur ~]# sane-find-scanner

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".

found USB scanner (vendor=0x03f0 [HP], product=0x4811 [PSC 1600 series]) at libusb:001:014
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.


Merci de votre aide