Pc qui plante
pahly
Messages postés
23
Statut
Membre
-
finelame Messages postés 209 Statut Membre -
finelame Messages postés 209 Statut Membre -
Bonjour,
voila sa fait bien 1mois que mon pc plante dés que je suis sur un jeu vidéo
on m'a conseillé de faire un memtest mais comme j'y connais rien je vous poste le rapport du memtest, en esperant que vous pourriez m'aider ^^ps : je posséde 4go de memoire vive normalement (2x2go)
4K25-6103-2505-0000-0020-5045-KC41-****
Windows Vista 6.0
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.3.7.0
Internal Version: 8, 3, 7, 0
(Nero Express)
Recorder: <ATAPI DVD A DH16A6S> Version: YA16 - HA 1 TA 0 - 8.3.7.0
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <ATAPI DVD A DH16A6S >Version: YA16 - HA 1 TA 0 - 8.3.7.0
Adapter driver: <Serial ATA> HA 1
=== Scsi-Device-Map ===
: WDC WD6400AAKS-22A7B 01.0 nvstor32 Port 2 ID 0 DMA: Off
: ATAPI DVD A DH16A6S YA16 nvstor32 Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVD A DH16A6S D: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 31 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.10.2009
Image CD
21:36:09 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
21:36:09 #2 Text 0 File Burncd.cpp, Line 3238
ATAPI DVD A DH16A6S
Seamless Link activés
21:36:09 #3 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using CD-R/RW media
21:36:09 #4 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 555 ( 0:09.30)
21:36:09 #5 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
21:36:09 #6 Text 0 File DlgWaitCD.cpp, Line 2946
Recorder: ATAPI DVD A DH16A6S;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
21:36:09 #7 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:36:09 #8 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 556 (556) = #556/0:7.31
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 556 blocks [D: ATAPI DVD A DH16A6S]
--------------------------------------------------------------
21:36:10 #9 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [D: ATAPI DVD A DH16A6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1445888, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 556 | 556 | 0x00
556 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
21:36:10 #10 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
21:36:10 #11 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
21:36:10 #12 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
21:36:10 #13 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
21:36:10 #14 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
21:36:10 #15 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 48x (7 200 Ko/s)
21:36:10 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
21:36:10 #17 Text 0 File MMC.cpp, Line 17846
StartDAO : CD-Text - Off
21:36:10 #18 Text 0 File MMC.cpp, Line 22530
Set BUFE: Seamless Link -> ON , Adapt writespeed to disc : ON
21:36:10 #19 Text 0 File MMC.cpp, Line 18074
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 00 09 1f
21:36:10 #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
21:36:28 #21 Text 0 File WriterStatus.cpp, Line 245
<D: ATAPI DVD A DH16A6S> start writing Lead-Out at LBA 556 (22Ch), length 0 blocks
21:36:37 #22 Phase 37 File dlgbrnst.cpp, Line 1767
Burn process completed successfully at 48x (7 200 Ko/s)
21:36:37 #23 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
21:36:41 #24 Text 0 File Cdrdrv.cpp, Line 11450
DriveLocker: UnLockVolume completed
21:36:41 #25 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
voila sa fait bien 1mois que mon pc plante dés que je suis sur un jeu vidéo
on m'a conseillé de faire un memtest mais comme j'y connais rien je vous poste le rapport du memtest, en esperant que vous pourriez m'aider ^^ps : je posséde 4go de memoire vive normalement (2x2go)
4K25-6103-2505-0000-0020-5045-KC41-****
Windows Vista 6.0
IA32
WinAspi: -
NT-SPTI used
Nero Version: 8.3.7.0
Internal Version: 8, 3, 7, 0
(Nero Express)
Recorder: <ATAPI DVD A DH16A6S> Version: YA16 - HA 1 TA 0 - 8.3.7.0
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <ATAPI DVD A DH16A6S >Version: YA16 - HA 1 TA 0 - 8.3.7.0
Adapter driver: <Serial ATA> HA 1
=== Scsi-Device-Map ===
: WDC WD6400AAKS-22A7B 01.0 nvstor32 Port 2 ID 0 DMA: Off
: ATAPI DVD A DH16A6S YA16 nvstor32 Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
ATAPI DVD A DH16A6S D: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 31 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.10.2009
Image CD
21:36:09 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
21:36:09 #2 Text 0 File Burncd.cpp, Line 3238
ATAPI DVD A DH16A6S
Seamless Link activés
21:36:09 #3 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using CD-R/RW media
21:36:09 #4 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 555 ( 0:09.30)
21:36:09 #5 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)
21:36:09 #6 Text 0 File DlgWaitCD.cpp, Line 2946
Recorder: ATAPI DVD A DH16A6S;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
21:36:09 #7 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:36:09 #8 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 556 (556) = #556/0:7.31
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 556 blocks [D: ATAPI DVD A DH16A6S]
--------------------------------------------------------------
21:36:10 #9 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [D: ATAPI DVD A DH16A6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1445888, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 556 | 556 | 0x00
556 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
21:36:10 #10 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
21:36:10 #11 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
21:36:10 #12 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
21:36:10 #13 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.
21:36:10 #14 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
21:36:10 #15 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 48x (7 200 Ko/s)
21:36:10 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
21:36:10 #17 Text 0 File MMC.cpp, Line 17846
StartDAO : CD-Text - Off
21:36:10 #18 Text 0 File MMC.cpp, Line 22530
Set BUFE: Seamless Link -> ON , Adapt writespeed to disc : ON
21:36:10 #19 Text 0 File MMC.cpp, Line 18074
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 00 09 1f
21:36:10 #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
21:36:28 #21 Text 0 File WriterStatus.cpp, Line 245
<D: ATAPI DVD A DH16A6S> start writing Lead-Out at LBA 556 (22Ch), length 0 blocks
21:36:37 #22 Phase 37 File dlgbrnst.cpp, Line 1767
Burn process completed successfully at 48x (7 200 Ko/s)
21:36:37 #23 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
21:36:41 #24 Text 0 File Cdrdrv.cpp, Line 11450
DriveLocker: UnLockVolume completed
21:36:41 #25 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
A voir également:
- Pc qui plante
- Pc qui rame - Guide
- Reinitialiser pc - Guide
- Downloader for pc - Télécharger - Téléchargement & Transfert
- Double ecran pc - Guide
- Forcer demarrage pc - Guide
12 réponses
en quel résolution joues-tu?
à quels jeux?
quels niveaux de détails?
autre chose :
as-tu récemment changé quelque chose à ta configuration?
connais-tu la marque et la puissance de ton alimentation?
à quels jeux?
quels niveaux de détails?
autre chose :
as-tu récemment changé quelque chose à ta configuration?
connais-tu la marque et la puissance de ton alimentation?
Ben je comprend que a moitier ce test mais a mon avis fait un bon scan anti-virus avec un bon antivirus (kaplersky) et défragmente bien, un nettoyage de registre ferait pas de mal pour sa RegCleaner est super !
Essai également d'ouvrir ton PC et de passer un bon coup de compresseur si il y a de la poussière, si ta pas de compresseur acheté une bombe d'air comprimer dans un boutique d'informatique ou en grande surface.
Essai également d'ouvrir ton PC et de passer un bon coup de compresseur si il y a de la poussière, si ta pas de compresseur acheté une bombe d'air comprimer dans un boutique d'informatique ou en grande surface.
mes temperatures en jeu cg 62 degres celsius donc pas de probleme
scan anti virus fait et j'ai rien trouvé , je vais defragmenter et je verrais bien
scan anti virus fait et j'ai rien trouvé , je vais defragmenter et je verrais bien
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
Nétoi l'interieure de ton PC sa doit être plein de poussière la-dan. Je conait pas cet anti virus mais il doit pas etre génial.
ben non justement :s j'ai tous bien nettoyé j'ai meme envoyer a reparé a boulanger la ou je l'ai acheté ils ont changé la cg mais sa fonctionne toujours pas
drivers à jour
Configuration : intel quad core Q8200
4go de memoire DDR2
Carte graphique nvidia geforce 9600 gs
Configuration : intel quad core Q8200
4go de memoire DDR2
Carte graphique nvidia geforce 9600 gs
