Pb Gravure (Nero)

Salut,
J'ai essayé de gravé un CD de MP3 en utilisant Nero, mais sa na pas marché et j'ai perdu le CD, il est inutilisable;
La simulation a réussi mais lorsqu'il allé commencé la gravage sa c arreter à l'erreur suivante "Could not perform EndTrack"
Voici le rapport generer par Nero, si quelqu'un peut m'aider sa serai sympa:

Windows XP 5.1
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, head WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes,
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <MITSUMI CR-487ETE> Version: 0019 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 0 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6E040L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B atapi Port 0 ID 1 DMA: Off
CdRomPeripheral : MITSUMI CR-487ETE atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8520 E: CDRom0
MITSUMI CR-487ETE F: CDRom1

CD-ROM (MP3)
09:14:14 #1 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
09:14:14 #2 Text 0 File Burncd.cpp, Line 2868
MITSUMI CR-487ETE
ExacLink activated
09:14:14 #3 Text 0 File Reader.cpp, Line 127
Reader running
09:14:14 #4 Text 0 File Writer.cpp, Line 122
Writer MITSUMI CR-487ETE running
09:14:14 #5 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
09:14:14 #6 Text 0 File Burncd.cpp, Line 3153
Turn on Track-At-Once, using CD-R/RW media
09:14:14 #7 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 359846 ( 79:59.71)
Last address to be written: 355785 ( 79:05.60)
09:14:14 #8 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)
09:14:14 #9 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: MITSUMI CR-487ETE;
CDR code: 00 97 28 12; OSJ entry from: GIGASTORAGE CORPORATION
ATIP Data:
Special Info [hex] 1: F0 00 80, 2: 61 1C 0C (LI 97:28.12), 3: 4F 3B 48 (LO 79:59.72)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
09:14:14 #10 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================
09:14:14 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 355786 (355786) = #355786/79:3.61
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 355784 blocks [MITSUMI CR-487ETE]
--------------------------------------------------------------
09:14:14 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [MITSUMI CR-487ETE] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 728956928, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
355786 | lead-out | 1 | 0x41 | 0x00
09:14:14 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 355786 -> 355784.
09:14:15 #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
09:14:15 #15 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.
09:14:15 #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
09:14:15 #17 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started
09:14:17 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
09:14:37 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
09:14:37 #20 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 244.6x (36 696 KB/s)
09:14:37 #21 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 16x (2 400 KB/s)
09:14:39 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
09:14:39 #23 Text 0 File Mmc.cpp, Line 21235
Set BUFE: ExacLink -> ON
09:19:40 #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
09:19:44 #25 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 16x (2 400 KB/s)
09:19:45 #26 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 16x (2 400 KB/s)

09:19:46 #27 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 355936 (0x00056E60)

09:19:46 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #355936
09:19:46 #29 Text 0 File Mmc.cpp, Line 15631
PreGap for Track 1 corrected from 150 to -355786 to get Index1Position 0
09:19:46 #30 Text 0 File Mmc.cpp, Line 21235
Set BUFE: ExacLink -> ON
09:19:55 #31 SCSI -1037 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03300000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x63
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x05 0x7D 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x63 0x00
09:19:55 #32 CDR -1037 File Writer.cpp, Line 311
End of user area of this track
09:19:55 #33 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
09:19:56 #34 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
09:20:00 #35 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
MITSUMI CR-487ETE\H1 T0
09:20:00 #36 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
09:20:00 #37 Text 0 File Mmc.cpp, Line 15908
<MITSUMI CR-487ETE > start Close Session
09:20:20 #38 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 16x (2 400 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17/07/2002 03:05:10
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/11/2002 11:53:04
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20/12/2004 20:37:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 23:59:44 (Adapter driver for rec)