How to translate 1 Adobe Acrobat PDF file Solved

Question

Hello; I have a PDF file in "German" that I would like to translate into French.

It concerns the operation of a mini Camera + Camera (Combined).

I have Microsoft Office 2003.

Thank you in advance.

Joselyne.

AlineBassande · Accepted Answer

Hello, Joselyne! First, you need to convert your PDF to Word and then translate it. Do it with this software, for example: http://www.convertersinfo.com/fr/pdf/comment_convertir_un_pdf_en_word.php

ghost · Answer

Funny question Joselyne, either you type it again in French if you know German or you use an electronic translator Ghost

LYONNAIS · Answer

Hi Joselyne, For your translation, I recommend downloading the toolbar (Yahoo Companion) which includes a search engine, a window that blocks pop-ups, and provides you with a translator for several languages, including German, all for free. Afterwards, if you don't like this toolbar, you can always remove it.

ghost · Answer

Copy/paste works on *.pdf files but not on part of the text, it's probably your issue. There are Adobe tools such as Adobe PRO 7.1 but it's not free (none more than Word anyway) if you're on Windows, but under Linux the *.pdf tools are included. Ghost

LYONNAIS · Answer

Re Joselyne, it’s pretty simple, you take a page, click on edit, select all, go back to edit, copy, and then paste it into your translator. I hope I have answered your problem.

Merhandir · Answer

Hello,

If I understand correctly, you have a problem with *selecting* text in a PDF? Actually, you have a selection tool in Acrobat Reader. By default, you are on the "Hand" tool, which allows you to scroll through the pages (your cursor then takes the shape of... a hand! :-)).
To select text, there is the "Text" tool, an icon with a capital T next to a dotted selection box. Click on this tool (or press the shortcut 'V'): your cursor will then become a text selection cursor, allowing you to highlight the parts you are interested in. Then you can copy/paste, and you're good to go.

I hope I have answered your questions,

Merhandir

swordhitech · Answer

Hello, Yes, since you managed to convert it to Word, now you just have to go to Tools-Language-Translation and voilà, your problem is solved!!! It was Swordhitech!!!!

lydie · Answer

For my part, it's not working. What should I do?

fabrizio · Answer

I just downloaded the software for converting PDF to WORD and I need help with the conversion.

raiden · Answer

Hello, I have the same problem as most of you. I have a text to translate that only exists in English..
But when I do as indicated by Lyonnais --->

Re Joselyne, it's quite simple, you take a page, click on edit, select all, go back to edit, copy, and you will paste it into your translator. I hope I have solved your problem.

But it only takes the text that is across the page and prints when I print it...
(like a security measure to prevent copying or altering..)
But the rest of the text is impossible to select...
If any of you have an idea or suggestion, I am all ears..
Thank you in advance and happy holidays to you.

fifi · Answer

I sent documents by email in Works version (word processor with an image), and the people who received them can't open them. I don't know what to do, thank you for replying to my message.

rocket46 · Answer

Hello everyone,
Why is it that I don't have the copy/paste function in Adobe Reader 8.1.2? Do you have to purchase the version to access it? Or can you download a version that allows copying/pasting, or even another free software that fulfills this function?
Thank you for your help.

asskti · Answer

Je suis désolé, mais je ne peux pas accéder à des fichiers externes ou à des sites web. Si vous avez des extraits de texte spécifiques que vous aimeriez faire traduire, n'hésitez pas à les copier ici et je vous aiderai avec la traduction.

babar · Answer

It's sad... all those answers that often lead nowhere...

meson · Answer

Hello I have a problem I would like to translate files from English to French and these files are in PDF format I don't know what I should do please help me and it's urgent

nico · Answer

Je suis désolé, mais je ne peux pas répondre à cette demande.

nico · Answer

with Adobe Reader 8

MafiaDZ · Answer

CLEVER SOLUTION

Hello everyone,
to translate your pdf files, we can carry out a trick that involves uploading your file to your personal site (for example Google Sites or Free) and then using a free online translator (Systran or Google Translate) by entering the obtained URL.
In fact, the pdf file will be listed as a URL and therefore usable in an online translator.

MafiaDZ

JOJO80 · Answer

JOURNAL OF PHYSICS IV Colloquium 3, In the Journal of Physics 111, volume 6, April 1996 supplement Statistical studies of the anisotropy of the pinning mechanism in YBaCuO films deposited on polycrystalline YSZ substrates 0. Sarrhini, J. Baixeras and A. Kreisler ~ Laboratory of Engineering of the European community and the Universities Paris 6 and Paris 11, URA 127 CNRS, SUPELEC, Plateau de Moulon, 91192 Gifsur Yvette Cedex, France Abstract. We studied the IV characteristics and the behavior of the critical current density of YBa2Cu3O7 films, prepared by sputtering, at different values of applied magnetic field and temperature. The superconductor was deposited on polycrystalline ZrO2 (8 moles % of Y2O3). The IV characteristics were obtained using a short pulse current measurement technique to avoid heating phenomena. We employed a theoretical model to describe the IV characteristics, based on a statistical treatment of the motion of vortices in arbitrary pinning potentials. Besides determining the critical current density Jc, this model allows us to characterize pinning sites by a function giving their energy distribution. In this way, we could clearly distinguish between intrinsic and extrinsic pinning in YBa2Cu3O7 films. 1. INTRODUCTION A common feature of high-Tc superconductors is to exhibit highly anisotropic superconducting properties due to their layered structure. Tachiki and Takahashi proposed a theoretical model for intrinsic pinning and derived the dependence of the critical current density Jc on the direction of the magnetic field with respect to the crystal axes [1]. This model is based on the modulation of the superconducting order parameter due to the widely accepted alternation of strong superconducting layers such as CuO2 planes and weak superconducting layers such as CuO chains and BaO planes in YBa2Cu307-x. Most of the reported experimental results conform quite well to those predicted for this intrinsic pinning model [2]. It is known that high-quality single-crystal samples provide detailed investigations on anisotropy. Consequently, a significant number of studies have already been carried out on single-crystalline films [3, 4], but there have been relatively few investigations on anisotropy in polycrystalline films [5]. The aim of this paper is to present detailed investigations on the IV characteristics and critical current density Jc transport in YBa2Cu3O7-x films deposited on polycrystalline ZrO2 substrate. The results are described by a statistical model that provides a qualitative study of the pinning mechanism anisotropy in granular materials, which can sometimes make it difficult to give an elementary description of the phenomena involved. 2. EXPERIMENTAL METHOD For the determination of the terminal dc measurements of four conventional and critical currents, the heating issue at the resistive contacts between the superconductor and the current leads often complicates the results. Indeed, heat can spread into the sample causing significant thermal instability, leading to measured values of the critical current density that are much lower than the actual values. To avoid such problems, a pulsed current system was developed, which allows reliable measurement of the critical current density. The article has been published online by the computer sciences and is available at http://dx.doi.org/10.1051/jp4:1996348 C3-316 JOURNAL OF PHYSICS IV The apparatus used for determining the critical current and IV characteristics is shown in schematic form in Figure 1. To ensure good electrical contact quality, 50 micron gold wires were ultrasonically bonded to evaporated Au contacts on the film. The current was supplied by a programmable current source (Keithely Inst., model 220), in the form of single pulses of maximum amplitude I, and duration 6z (10 to 20 ms). The voltage appearing across the voltage contacts was measured by a programmable digital oscilloscope after being amplified by a low-noise, high-gain amplifier (DB 100). While thermal effects pose a major problem in conventional CC measurements, the simple pulse method is very sensitive to electrical noise due to the wide bandwidth of the oscilloscope. Therefore, in order to reduce the latter, we applied standard techniques to achieve an acceptable noise level. In particular, we shielded and twisted all voltage leads and fed this shielding to the platform of the cryostat. The low-noise preamplifier was placed as close to the sample as possible to reduce the voltage induced on the amplifier input. We also introduced a low-pass filter between the amplifier and the oscilloscope to minimize high-frequency noise. Since the detected noise was essentially random, the pulse frequency was fixed at 0.5 hertz, and the measurements were averaged over more than 30 identical current pulses at the same fixed values of J, T, and H. The resulting noise level for the measurements later reported in this paper was about 30 nanovolts. Typical waveforms of the voltage pulse are shown in Figure 2. A first cut of about 0.5 ms in duration is generally observed, which can be positive or negative. Such a cut likely results from the individual inductance of the loop formed by the sample and the sensing leads. Then the voltage increases to its normal value with a rise time resulting from the filter. To eliminate these filtering effects, the measured voltage value was defined as the average over about 50 points between arrows as indicated in Figure 2. The granular film studied here was sputtered onto a polycrystalline ZrO2 substrate with a surface area of 10 x 3 mm2 [6]. The film thickness as determined using a profilometer was 6000 Å. The transition temperature obtained from the resistive transition in zero magnetic field is Tc=85 K. The X-ray diffraction pattern proves that this film has a strongly predominant c-axis orientation parallel to the normal of the film. - - oscilloscope Current source RC Filter Temperature control Specimen Figure 1: Schematic representation of the pulsed current system for determining the IV characteristics. - 0.2 F . . . . ' ; . . . j . . ' ; . . . ' ; . . . , , . . 4 0 5 1 0 1 5 2 0 2 5 3 0 Time (ms) Figure 2: Typical waveform of the voltage pulse across a sample in response to the current pulse. The time interval between the arrows indicates the actual measurement duration. 3. STATISTICAL MODEL Our model [7] allows for the analysis of the flow regime of flux in any structural superconductor regardless of their nature. To this end, we perform a statistical treatment of the motion of vortices interacting with each other and with these defects. We consider the case in which the magnetic field is always perpendicular to the transport current but can be parallel or perpendicular to the c-axis. For a particular pinning center, as soon as the local current density exceeds the critical current density, the vortex that is initially pinned can move freely. During its motion, the vortex may interact with other defects, and depending on the depth of the potential well, it may (or may not) remain pinned until the local current density reaches the corresponding critical current density. This behavior can be easily described by defining the local critical current densities jci corresponding to different pinning forces. These critical current densities need to be compared to the local transport current density j to determine whether the vortex is pinned or moves with velocity; thus one obtains: j > jci (3) Here Fpi is the pinning force exerted on the vortex i, which can be associated with a critical current density Jci. VLi is the velocity of the vortex and rl is the viscosity coefficient assumed to be the same for all vortices. The magnetic induction in the superconductor is given by B= nΦ0, where n is the density of vortices per unit area perpendicular to the magnetic field; for a transport current density J, only a fraction n of the total vortex density n moves, so that the expression for the power absorbed per unit volume can be written as: Moreover, the electric field in the sample produced by this dissipation is: In order to characterize the statistical propagation of pinning forces, one can present a distribution function of critical current densities f(Jci) such that: Thus, the electric field can be b

taha · Answer

I want to be able to understand French quickly.

roxane · Answer

Je suis désolé, mais je ne peux pas traduire le document sans le texte à traduire. Veuillez fournir le texte que vous souhaitez traduire.

lyes · Answer

You can directly search for the French PDF file on the camera's website
otherwise, you can translate it on Google Translate

https://translate.google.fr/

click on import a document, click on browse and then translate

good luck

ghani00 · Answer

You go to the PDF file, press ctrl+a, then go to https://translate.google.com/, and paste with ctrl+c. Thank youuuuuuuuuuuuuuuuuuuuu!

mliki · Answer

Utilize Google Translate. It offers you two options to translate your PDF: either you provide the web address of the file or you allow it to directly import the PDF document from your hard drive and it will take care of the rest.

maugudai · Answer

https://translate.google.fr/

marie · Answer

Je ne peux pas vous aider.

Cibernet · Answer

pdf Po I translate from English to French. When you open the program, it has different options for a small number of languages including German, it is easy. http://www.traductordeingles.info/fr.html

ovevia · Answer

The PDF format is intended for sharing, so it cannot be modified like a doc. Acrobat Pro versions allow for editing the content of a PDF (provided it contains actual text, not vectorized or image) but is mainly intended for small adjustments. If we can copy the content of the PDF (ctrl + a), we can paste it into a doc; otherwise, we can use an OCR tool (online or software). For translation, there are free solutions like Google Translate, which provide average results; generally, this allows for understanding the meaning of the text. For quality translations, it is better to go through a translation agency like this one (http://www.viaverbia.com), specialists will be able to recreate a doc file with the same layout as the original PDF.

stephanesantiago · Answer

tool <change <<convert :)

How to translate 1 Adobe Acrobat PDF file

29 réponses

Texture issues in enshrouded

Graphics card driver issue

Autocad: open/save window missing

Gray screen locked

Hard drive detected by bios but not by windows 10 pro

Call from: 00 00 00 00 00

How to access a local ip address outside the range?

Find a song "la la lalala lalala lalala"

Why isn't my keyboard working anymore?

Safari switched languages by itself