Cisco Packet Tracer
Hola, ¿cuáles son los principales comandos para Packet Tracer?
Configuración: Windows Vista Firefox 3.0.10
4 respuestas
-
% Invalid input detected at '^' marker.
Switch(config)#%SYS-5-CONFIG_I: Configured from console by console
^
% Invalid input detected at '^' marker.
Switch(config)#interface vlan3
Switch(config-if)#switch
Switch(config-if)#exit
Switch(config)#vlan 4 name Users
^
% Invalid input detected at '^' marker.
Switch(config)#vlan database
^
% Invalid input detected at '^' marker.
Switch(config)#exit
%SYS-5-CONFIG_I: Configured from console by console
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.
Switch(vlan)#vlan 4 name Users
VLAN 4 modified:
Name: Users
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#interface f0/6
Switch(config-if)#sw
Switch(config-if)#switchport acces vlan 4
Switch(config-if)#exit
Switch(config)#interface f0/5
Switch(config-if)#sw
Switch(config-if)#switchport acces vlan 4
%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan2, changed state to downSwitch(config-if)#exit
Switch(config)#interface f0/4
Switch(config-if)#sw
Switch(config-if)#switchport acces vlan 4
Switch(config-if)# -
^
% Invalid input detected at '^' marker.
Switch(config)#vlan admin
^
% Invalid input detected at '^' marker.
Switch(config)#vlan database
^
% Invalid input detected at '^' marker.
Switch(config)#exit
%SYS-5-CONFIG_I: Configured from console by console
Switch#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.
Switch(vlan)#switchport access mode
^
% Invalid input detected at '^' marker.
Switch(vlan)#vlan 2 name admin
VLAN 2 modified:
Name: admin
Switch(vlan)#no debug all
^
% Invalid input detected at '^' marker.
Switch(vlan)#vlan 2 name Admin
VLAN 2 modified:
Name: Admin
Switch(vlan)#interface vlan2
^
% Invalid input detected at '^' marker.
Switch(vlan)#ip addr
Switch(vlan)#ip addr
^
% Invalid input detected at '^' marker.
Switch(vlan)#show vlan
^
% Invalid input detected at '^' marker.
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#show vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
Fa0/13, Fa0/14, Fa0/15, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
Fa0/21, Fa0/22, Fa0/23, Fa0/24
Gig1/1, Gig1/2
2 Admin active
3 compta active
4 Users active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
1002 enet 101002 1500 - - - - - 0 0
1003 enet 101003 1500 - - - - - 0 0
1004 enet 101004 1500 - - - - - 0 0
1005 enet 101005 1500 - - - - - 0 0
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#
Switch#vlan2 port 0/0
^
% Invalid input detected at '^' marker.
Switch#config admin
^
% Invalid input detected at '^' marker.
Switch#config vlan
^
% Invalid input detected at '^' marker.
Switch#
Switch#conf
Switch#configure vlan2
^
% Invalid input detected at '^' marker.
Switch#conf
Switch#configure 2
^
% Invalid input detected at '^' marker.
Switch#ip nat side
^
% Invalid input detected at '^' marker.
Switch#ip nat inside
^
% Invalid input detected at '^' marker.
Switch#database
Switch#database vlan
^
% Invalid input detected at '^' marker.
Switch#admin database
^
% Invalid input detected at '^' marker.
Switch#admin
Switch#admin
Translating "admin"...domain server (255.255.255.255)
% Unknown command or computer name, or unable to find computer address
Switch#
Switch#configure
Configuring from terminal, memory, or network [terminal]? t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#interface vlan
% Incomplete command.
Switch(config)#interface vlan2
%LINK-5-CHANGED: Interface Vlan2, changed state to upSwitch(config-if)#
Switch(config-if)#swit
Switch(config-if)#swi
Switch(config-if)#swi
Switch(config-if)#swi
Switch(config-if)#swi
Switch(config-if)#swi
Switch(config-if)#swi
Switch(config-if)#exit
Switch(config)#interface f0/5
Switch(config-if)#sw
Switch(config-if)#switchport access vlan 2
%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan2, changed state to upSwitch(config-if)#ip add
Switch(config-if)#ip add
Switch(config-if)#ip addresse
Switch(config-if)#ip addresse
^
% Invalid input detected at '^' marker.
Switch(config-if)#ip add
Switch(config-if)#add
Switch(config-if)#add ip
^
% Invalid input detected at '^' marker.
Switch(config-if)#exit
Switch(config)#interface
Switch(config)#int
Switch(config)#interface f0/5
Switch(config-if)#ip addr
Switch(config-if)#ip ad
Switch(config-if)#ip ad
Switch(config-if)#ip ad
Switch(config-if)#exit
Switch(config)#interface vlan3
%LINK-5-CHANGED: Interface Vlan3, changed state to upSwitch(config-if)#sw
Switch(config-if)#swi
Switch(config-if)#swich
Switch(config-if)#swich
^
% Invalid input detected at '^' marker.
Switch(config-if)#
%SYS-5-CONFIG_I: Configured from console by console
Switch# -
un pequeño sitio que agrupa los comandos
-
quién sabe hacer los VLAN?