Mega help a tous

manhunt94 Messages postés 8 Statut Membre -  
manhunt94 Messages postés 8 Statut Membre -
Bonjour,

je viens de formater le pc mais ma carte reseau (marvell) n'ai pas reconue donc j'ai telecharger le pilote mais l'installation est interompue toute seul a 98% donc impossible de me connecter a internet
j'ai esseiller d'autres driver sur le site de marvell mais j'ai 5 fichiers
.cat
.htm
.inf
.sys
.txt
que faire aider moi je vs pris merci
A voir également:

5 réponses

Utilisateur anonyme
 
lisez les instruction ecrits dans le TXT
0
manhunt94 Messages postés 8 Statut Membre
 
je ne comprend rien voici le texte

K8N Neo3-FSR (MS-7135) V1.7 BIOS Release
----------------------------------
This is Award BIOS release

2. This BIOS fixes the following problem of the previous version:
- Update CPU ID.
- Support nVIDIA 7900X2 PCI-E VGA card.

3. 2006/04/14

[Below information is Chinese language]

A. Award BIOS ¥¿¦¡µo¦æ

B. ¦¹ª©¥»­×¥¿¤U¦C°ÝÃD:
- §ó·s CPU ID.
- ¤ä´© nVIDIA 7900X2 PCI-E Åã¥Ü¥d.

C. §ó·s¤é´Á: ¤½¤¸2006¦~04¤ë14¸¹
0
manhunt94 Messages postés 8 Statut Membre
 
je me suis tromper de fichier texte c'est celui ci:

(C)Copyright 2002-2007 Marvell(R).
All rights reserved.
===========================================================================

yk51x86.txt created 02-Feb-2007

Readme File for YK51X86.sys v8.61.7.3
Marvell Yukon Ethernet Controller

NDIS5.1 Miniport Driver for Windows XP and Server 2003 (x86)

This file contains
1 Overview
2 Required Files
3 Installation
3.1 Installing the driver
3.2 Updating the driver
4 Parameters

===========================================================================

1 Overview
===========

YK51X86.sys is the NDIS5.1 32-bit Miniport driver.

***

2 Required Files
=================

To install the driver, the following files are required:
YK51X86.sys NDIS5.1 Miniport driver
YK51X86.inf installation setup script
YK51X86.CAT digital signature (only if the driver is certified)
***

3 Installation
===============

3.1 Installing the driver
--------------------------

Read the installation instructions in the adapter manual carefully.
Follow these instructions to install the adapter in your computer.

Due to the plug & play facility, the operating system is able to find,
identify, and configure an adapter automatically.

If the adapter is not detected during installation by the operating system the
adapter is installed as "Ethernet Controller" under "Other Devices".
To install the driver you have to perform a driver update as described
in the next section.

***

desoler mais je ne comprend pas l'anglais pouvez vous m'aider
0
Utilisateur anonyme
 
va dans le gestionnaire de peripherique , puis installer un peripherique , il va te demander le cd ou la destination du fichier , tu va dans le dossier ou se trouves les 5 fichier , pas contre je c'est pas le quelle exactement , teste avec les 5
0

Vous n’avez pas trouvé la réponse que vous recherchez ?

Posez votre question
manhunt94 Messages postés 8 Statut Membre
 
j'ai 3 fois point d'interogation avec point d'exclamation:
-autre perif. de pont PCI
-controleur de bus SM
-controleur de memoire PCI
mais je ne sait pas a quoi ils corespondent est ce que il y a un pour la carte reseau marvell si oui lequel et comment l'instaler merci de me repondre
0