Universal line TV
bragon
-
Duguesclin -
Duguesclin -
Hello
I have an Unic Line TV and its remote control, but I lost the manual and I’d like to tune the channels. How can I find a manual on the internet
thank you
I have an Unic Line TV and its remote control, but I lost the manual and I’d like to tune the channels. How can I find a manual on the internet
thank you
1 answer
-
Dear friend,
Have you managed to find a solution to your problem???
I have the same kind of situation that arises for me, where I cannot memorize the channels on the Unic-Line TV that I have.
Do you have the solution???
Thank you for your response.-
I have a TV (a 90s junk...) where the inscription on the back reads
TVC 7A55
The TV is stereo
On the remote there is the inscription DIGICOMPUTER 28 KEYS
The default language appears to be English.
To tune the channels, I discovered that the standard (PAL or SECAM),
so named SYS-1 or SYS-2, is set during the search with the help of a STD button on the TV (bottom, under the screen).
To scan the channels you must use the remote, press a button
with 2 arrows to the right [->->] and let it scroll. If the channel found
is not good, press [->->] again
Once found, the channel can be memorized by pressing the [STOP] button
- the STORE inscription appears in red, then the numeric key where you
want to memorize the channel, then again the [STOP] button - the inscription
STORE appears in green.
The channel is stored.
We can refine the settings by pressing a key with a magnifying glass (Tune) and
by pressing this key again, the tuning moves to the right. If the inscription
TUNE disappears, press the magnifying glass again. By pressing the key with a question mark [?], the tuning goes to the left (provided that the inscription TUNE
is still visible... it disappears after 2-3 seconds).
I erased (CLEARED) a channel with the -/-- key but I don't remember how.
This TV annoys me and the idiot who programmed this mess deserves scabies with
small arms so they can't scratch themselves!
;)
-