Double boot ubuntu XP

Fermé
rmei Messages postés 20 Date d'inscription vendredi 23 janvier 2009 Statut Membre Dernière intervention 28 décembre 2011 - 31 janv. 2009 à 20:13
mamiemando Messages postés 33299 Date d'inscription jeudi 12 mai 2005 Statut Modérateur Dernière intervention 2 octobre 2024 - 7 févr. 2009 à 15:09
Bonjour,alors voila, je vient de réinstaller XP sur mon pc puis ubuntu mais le double boot ne fonctionne pas.
Quand j'ai installé ubuntu il ne m'a pas demandé d'importer XP et au démarrage je n'ai pas le choix, je n'ai que ubuntu.
XP est bien présent j'en suis sur mais je ne sais pas comment faire pour paramétrer grub afin de pouvoir démarer sous XP.
Merci d'avance si quelqu'un veut bien m'aider...
A voir également:

4 réponses

mamiemando Messages postés 33299 Date d'inscription jeudi 12 mai 2005 Statut Modérateur Dernière intervention 2 octobre 2024 7 791
1 févr. 2009 à 16:40
Il suffit d'installer et/ou de reconfigurer grub :
sudo aptitude update
sudo aptitude safe-upgrade
sudo aptitude install grub

Normalement grub (menu au démarrage permettant de lancer windows ou linux) a dû détecter tout seul ton windows (fais un reboot pour voir). Si ce n'est pas le cas voici comment le corriger. Ensuite repère sur quelle partition est installée windows. Exemple :
(root@aldur) (~) # fdisk -l

Disk /dev/hda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x802b81ca

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1        1275    10241406    7  HPFS/NTFS
/dev/hda2            1276        4740    27832612+  83  Linux
/dev/hda3            4741        4865     1004062+  82  Linux swap / Solaris

Disk /dev/hdb: 82.3 GB, 82348277760 bytes
255 heads, 63 sectors/track, 10011 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4707841a

   Device Boot      Start         End      Blocks   Id  System
/dev/hdb1   *           1       10011    80413326    b  W95 FAT32

Dans cet exemple la partition windows est /dev/hda1. Une fois que tu l'as repéré, corrige /boot/grub/menu.lst en root ou avec un sudo, et ce à l'aide d'un éditeur texte (par exemple nano) :
sudo nano /boot/grub/menu.lst

Ensuite rajoute une section pour windows. Si l'on se réfère à l'exemple que je t'ai donné, windows est sur le premier disque (/dev/hda) => hd0 et sur la première partition (/dev/hda1) => 0 soit le couple (hd0,0). S'il avait été par exemple sur /dev/hdb3 ça aurait été (1,2). Voici mon fichier de configuration je te laisse l'adapter :
default     0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout     5

# Pretty colours
color cyan/blue white/blue

title       Debian GNU/Linux, kernel 2.6.26-1-686
root        (hd0,1)
kernel      /boot/vmlinuz-2.6.26-1-686 root=/dev/hda2 ro
initrd      /boot/initrd.img-2.6.26-1-686

title       Debian GNU/Linux, kernel 2.6.26-1-686 (single-user mode)
root        (hd0,1)
kernel      /boot/vmlinuz-2.6.26-1-686 root=/dev/hda2 ro single
initrd      /boot/initrd.img-2.6.26-1-686

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title       Other operating systems:
root

# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda1
title       Microsoft Windows XP Professionnel
root        (hd0,0)
savedefault
makeactive
chainloader +1

Note : si tes disques s'appelle /dev/sd... le raisonnement est identique. Les notations grub sont toujours de la forme (hdx,y).

Bonne chance
0
rmei Messages postés 20 Date d'inscription vendredi 23 janvier 2009 Statut Membre Dernière intervention 28 décembre 2011
2 févr. 2009 à 00:53
Je n'y arrive vraiment pas...
voila ce que je voi:
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=6d188ff5-56d5-4f51-bdc2-45b951bfcd46

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the

## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 8.10, kernel 2.6.27-11-generic
uuid 6d188ff5-56d5-4f51-bdc2-45b951bfcd46
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=6d188ff5-56d5-4f51-bd$
initrd /boot/initrd.img-2.6.27-11-generic
quiet

title Ubuntu 8.10, kernel 2.6.27-11-generic (recovery mode)
uuid 6d188ff5-56d5-4f51-bdc2-45b951bfcd46
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=6d188ff5-56d5-4f51-bd$
initrd /boot/initrd.img-2.6.27-11-generic
quiet

title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
uuid 6d188ff5-56d5-4f51-bdc2-45b951bfcd46
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=6d188ff5-56d5-4f51-bdc$
initrd /boot/initrd.img-2.6.27-7-generic

title Ubuntu 8.10, memtest86+
uuid 6d188ff5-56d5-4f51-bdc2-45b951bfcd46
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

puis ensuite j'ai rentré sa en suivant ton exemple:

# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda5
title Microsoft Windows XP Professionnel
root (hd5,1)
savedefault
makeactive
chainloader +1

je peu choisir xp o démarage mais qd je le choisi sa ne fait rien...
ubuntu reconnait windows comme un systeme ntfs situé dans /dev/sda5 lui meme dans extended qui est /dev/sda3
Je ne sait pas si je me fait comprendre mais je ne suis pa o top en informatique...
0
mamiemando Messages postés 33299 Date d'inscription jeudi 12 mai 2005 Statut Modérateur Dernière intervention 2 octobre 2024 7 791
2 févr. 2009 à 08:41
Au feeling je dirais que c'est plutôt (hd0,2) ou (hd0,4) alors... En fait le plus simple c'est de tester quand grub apparaît au démarrage. Tu passe en mode interactif après avoir placé le bandeau sur windows, tu édites la ligne (e) de sorte à corriger le disque de démarrage, et ceci fait, tu testes en appuyant sur 'b'.

Une fois que tu auras trouvé il suffira de corriger /boot/grub/menu.lst en root. Peux tu me reporter le résultat de
sudo fdisk -l

Bonne chance
0
rmei Messages postés 20 Date d'inscription vendredi 23 janvier 2009 Statut Membre Dernière intervention 28 décembre 2011
2 févr. 2009 à 11:03
voila le résultat de fdisk -l :

Disque /dev/sda: 118.5 Go, 118526284800 octets
255 heads, 63 sectors/track, 14410 cylinders
Units = cylindres of 16065 * 512 = 8225280 bytes
Identifiant disque: 0x43a9fdfc

Périphérique Amorce Début Fin Blocs Id Système
/dev/sda1 * 1 3039 24410736 83 Linux
/dev/sda2 3040 3343 2441880 82 Linux swap / Solaris
/dev/sda3 3344 6990 29294527+ f W95 Etendu (LBA)
/dev/sda5 3344 6990 29294496 7 HPFS/NTFS

je vais tester avec hdO,4

Encore merci de me répondre c'est vraiment sympa
0
rmei Messages postés 20 Date d'inscription vendredi 23 janvier 2009 Statut Membre Dernière intervention 28 décembre 2011 > rmei Messages postés 20 Date d'inscription vendredi 23 janvier 2009 Statut Membre Dernière intervention 28 décembre 2011
2 févr. 2009 à 11:11
error 23: error while parsing number

Voila le message d'erreur que sa affiche quand je teste avec (hd0,2), (hd0,3), (hd0,4)..................
0
mamiemando Messages postés 33299 Date d'inscription jeudi 12 mai 2005 Statut Modérateur Dernière intervention 2 octobre 2024 7 791
6 févr. 2009 à 09:48
Essaye d'enlever l'espace derrière la virgule.

Bonne chance
0
rmei Messages postés 20 Date d'inscription vendredi 23 janvier 2009 Statut Membre Dernière intervention 28 décembre 2011
7 févr. 2009 à 14:44
Je n'ai pas mis d'espace derriere la virgule...
0
mamiemando Messages postés 33299 Date d'inscription jeudi 12 mai 2005 Statut Modérateur Dernière intervention 2 octobre 2024 7 791
7 févr. 2009 à 15:09
Tu as peut-être tapé un caractère spécial en faisant une faute de frappe. Efface la ligne et retape là. Note que pour faire tes tests tu n'es pas obligé de modifier /boot/grub/menu.lst, tu peux simplement passer en mode interactif quand grub apparaît à l'écran (par contre il faudra corriger en conséquence /boot/grub/menu.lst pour que les changements soient conservés).

Au niveau de la syntaxe c'est bien (hdX,Y) où X et Y sont deux nombres entiers.

Tu peux aussi essayer de générer /boot/grub/menu.lst avec la commande :
sudo dpkg-reconfigure grub

Bonne chance
0