Pb fixation avec nero
salut a tous!
Voila je vous explique mon pb sous nero et ce, a chaque fois que je fais un cd multi cession...
Voici le log créé par nero:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 14:49:52
Version de Nero : 6.3.0.0
Graveur : <ARTEC WSM-YG52> Version: 1.10 - HA 1 TA 0 - 6.3.0.0
Pilote d'adaptateur :<atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM : <IDE DVD-ROM 16X >Version: 3.10 - HA 0 TA 1 - 6.3.0.0
Pilote d'adaptateur :<atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : IC35L080AVVA07-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 0 ID 1 DMA: On
CdRomPeripheral : ARTEC WSM-YG52 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
IDE DVD-ROM 16X D: CDRom0
ARTEC WSM-YG52 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 200MB (205332kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.1.2004
CD-ROM (ISO)
18:48:53 #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
18:48:53 #2 Phase 89 File dlgbrnst.cpp, Line 1800
Super Link activé
18:48:53 #3 Text 0 File Reader.cpp, Line 118
Reader running
18:48:53 #4 Text 0 File Writer.cpp, Line 124
Writer ARTEC WSM-YG52 running
18:48:53 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
18:48:54 #6 Text 0 File Burncd.cpp, Line 3094
Turn on Piste par piste, using CD-R/RW media
18:48:55 #7 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 144765 (32:12.15)
18:48:55 #8 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE
18:48:55 #9 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: ARTEC WSM-YG52;
CDR code: 00 97 24 15; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 0F (LI 97:24.15), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
18:48:55 #10 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:48:55 #11 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 18538 (18538) = #18538/4:7.13
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 18536 blocks [ARTEC WSM-YG52 ]
--------------------------------------------------------------
18:48:55 #12 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [ARTEC WSM-YG52 ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 38273024, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
126078 | lead-in | 0 | 0x00 | 0x41
126078 | 2 | 0 | 0x00 | 0x41
126228 | 2 | 1 | 0x00 | 0x41
144766 | lead-out | 1 | 0x00 | 0x41
18:48:55 #13 Text 0 File ThreadedTransferInterface.cpp, Line 994
Removed 2 run-out blocks from end of track 2. Length: 18538 -> 18536.
18:48:55 #14 Phase 24 File dlgbrnst.cpp, Line 1800
Début de mise en cache des fichiers
18:48:55 #15 Text 0 File Burncd.cpp, Line 4061
Cache writing successful.
18:48:55 #16 Phase 25 File dlgbrnst.cpp, Line 1800
Cache des fichiers terminé
18:48:55 #17 Phase 32 File dlgbrnst.cpp, Line 1800
Début de simulation à 32x (4 800 Ko/s)
18:48:55 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #126228
18:48:55 #19 Text 0 File Mmc.cpp, Line 19397
Set BUFE: Super Link -> ON
18:49:08 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
18:49:17 #21 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
18:49:17 #22 Phase 33 File dlgbrnst.cpp, Line 1800
Simulation terminée avec succès à 32x (4 800 Ko/s)
18:49:18 #23 Phase 36 File dlgbrnst.cpp, Line 1800
Début de gravure à 32x (4 800 Ko/s)
18:49:19 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #126228
18:49:19 #25 Text 0 File Mmc.cpp, Line 19397
Set BUFE: Super Link -> ON
18:49:57 #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
18:50:13 #27 Text 0 File Mmc.cpp, Line 14243
<ARTEC WSM-YG52 > start Close Session
18:50:21 #28 SCSI -1135 File Cdrdrv.cpp, Line 1170
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
18:50:21 #29 CDR -1135 File ThreadedTransferInterface.cpp, Line 1147
Erreur écriture
18:50:21 #30 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1147
Impossible d'effectuer la fonction Fixation
18:50:21 #31 Text 0 File Mmc.cpp, Line 14243
<ARTEC WSM-YG52 > start Close Session
18:50:34 #32 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
18:50:34 #33 Phase 38 File dlgbrnst.cpp, Line 1800
La gravure a échoué à 32x (4 800 Ko/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 02:27:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Kkun sait commnet résoudre mon pb?
Merci!
@+
SmOg
Voila je vous explique mon pb sous nero et ce, a chaque fois que je fais un cd multi cession...
Voici le log créé par nero:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 11/11/2003 14:49:52
Version de Nero : 6.3.0.0
Graveur : <ARTEC WSM-YG52> Version: 1.10 - HA 1 TA 0 - 6.3.0.0
Pilote d'adaptateur :<atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM : <IDE DVD-ROM 16X >Version: 3.10 - HA 0 TA 1 - 6.3.0.0
Pilote d'adaptateur :<atapi> HA 0
=== Scsi-Device-Map ===
DiskPeripheral : IC35L080AVVA07-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : IDE DVD-ROM 16X atapi Port 0 ID 1 DMA: On
CdRomPeripheral : ARTEC WSM-YG52 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
IDE DVD-ROM 16X D: CDRom0
ARTEC WSM-YG52 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 200MB (205332kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.1.2004
CD-ROM (ISO)
18:48:53 #1 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
18:48:53 #2 Phase 89 File dlgbrnst.cpp, Line 1800
Super Link activé
18:48:53 #3 Text 0 File Reader.cpp, Line 118
Reader running
18:48:53 #4 Text 0 File Writer.cpp, Line 124
Writer ARTEC WSM-YG52 running
18:48:53 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)
18:48:54 #6 Text 0 File Burncd.cpp, Line 3094
Turn on Piste par piste, using CD-R/RW media
18:48:55 #7 Text 0 File DlgWaitCD.cpp, Line 239
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 144765 (32:12.15)
18:48:55 #8 Text 0 File DlgWaitCD.cpp, Line 244
Write in overburning mode: FALSE
18:48:55 #9 Text 0 File DlgWaitCD.cpp, Line 2068
Recorder: ARTEC WSM-YG52;
CDR code: 00 97 24 15; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 0F (LI 97:24.15), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
18:48:55 #10 Text 0 File DlgWaitCD.cpp, Line 405
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:48:55 #11 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 18538 (18538) = #18538/4:7.13
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 18536 blocks [ARTEC WSM-YG52 ]
--------------------------------------------------------------
18:48:55 #12 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [ARTEC WSM-YG52 ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 38273024, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
126078 | lead-in | 0 | 0x00 | 0x41
126078 | 2 | 0 | 0x00 | 0x41
126228 | 2 | 1 | 0x00 | 0x41
144766 | lead-out | 1 | 0x00 | 0x41
18:48:55 #13 Text 0 File ThreadedTransferInterface.cpp, Line 994
Removed 2 run-out blocks from end of track 2. Length: 18538 -> 18536.
18:48:55 #14 Phase 24 File dlgbrnst.cpp, Line 1800
Début de mise en cache des fichiers
18:48:55 #15 Text 0 File Burncd.cpp, Line 4061
Cache writing successful.
18:48:55 #16 Phase 25 File dlgbrnst.cpp, Line 1800
Cache des fichiers terminé
18:48:55 #17 Phase 32 File dlgbrnst.cpp, Line 1800
Début de simulation à 32x (4 800 Ko/s)
18:48:55 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #126228
18:48:55 #19 Text 0 File Mmc.cpp, Line 19397
Set BUFE: Super Link -> ON
18:49:08 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
18:49:17 #21 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
18:49:17 #22 Phase 33 File dlgbrnst.cpp, Line 1800
Simulation terminée avec succès à 32x (4 800 Ko/s)
18:49:18 #23 Phase 36 File dlgbrnst.cpp, Line 1800
Début de gravure à 32x (4 800 Ko/s)
18:49:19 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #126228
18:49:19 #25 Text 0 File Mmc.cpp, Line 19397
Set BUFE: Super Link -> ON
18:49:57 #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
18:50:13 #27 Text 0 File Mmc.cpp, Line 14243
<ARTEC WSM-YG52 > start Close Session
18:50:21 #28 SCSI -1135 File Cdrdrv.cpp, Line 1170
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
18:50:21 #29 CDR -1135 File ThreadedTransferInterface.cpp, Line 1147
Erreur écriture
18:50:21 #30 TRANSFER -19 File ThreadedTransferInterface.cpp, Line 1147
Impossible d'effectuer la fonction Fixation
18:50:21 #31 Text 0 File Mmc.cpp, Line 14243
<ARTEC WSM-YG52 > start Close Session
18:50:34 #32 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
18:50:34 #33 Phase 38 File dlgbrnst.cpp, Line 1800
La gravure a échoué à 32x (4 800 Ko/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 02:27:50 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Kkun sait commnet résoudre mon pb?
Merci!
@+
SmOg
8 réponses
-
ContributeurJ'ai eu le même problème que j'ai résolu en passant un disque de nettoyage dans mon graveur. Peut-être que ça peut marcher pour d'autres.
-
j'ai le meme probleme et je grave à la vitesse minimum.
Message apres la simulation réussi.
erreur calibrage puissance
ecriture de cloture rapide
erreur fixation session
impossible d'effectuer la fonction Disc at once
la gravure a echoué à 1x(1385Ko/s).
Donc si quelqu'un a une solution .... -
je pense avoir trouvé la solution:
graver à la vitesse la plus lente possible.
Pour moi ca a marché!
Faites le test et donnez nous vos résultats! -
bonjour a tous probleme de fixation avec nero je m en sort plus aidez moi svp
-
slt
je crois que tu dois remettre tes drivers à jour.
pour ce qui est de la fixation, surment le graveur qui est naze ou allors démonte le et nettoie le bien
ciao -
hy smog
meme probleme pour moi
je grave les 80mn sans aucun probleme
mais pas les 90mn m affiche la meme erreur que toi
je cherche!
@+ -
Ben tant pis alors....
Sniffff!!!
@+
SmOg -
allo?
Personne n'a jamais eu ce genre de pb?
@+
SmOg
