Impossible de graver dvd
bonjour
je ne peut plus graver de dvd
que ce soit un film a l'aide de dvdshrink et nero7
ou bien un dvd de données nero 7 ou recordnow
les dvd vierges utilisé marchait bien pourtant avant
traxdata et verbatim dvd+r
ma config:
windowsxp
pentium4 2.53ghz
256mo de ram
pc hp pavillon764.fr
tou dorigine
1lecteur JLMS DVD ROM LTD166S
1graveur hp dvd writer 200J
le message derreur :
5C80001080100000000622518597
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero API version: 7.0.1.4
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 1, 4
Recorder: <HP DVD Writer 200j> Version: 1.36 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-22CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS DVD-ROM LTD-166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
JLMS DVD-ROM LTD-166S E: CDRom0
HP DVD Writer 200j F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261612kB)
Free physical memory: 145MB (149080kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.1.2006
NeroAPI
00:42:30 #1 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 932
Required file 'VIDEO_TS.IFO' is not present
00:42:30 #2 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 932
Required file 'VIDEO_TS.BUP' is not present
00:42:30 #3 Phase 117 File APIProgress.cpp, Line 278
DVD-Video files compliance test failed
00:42:31 #4 Text 0 File NeroAPIBurnFS.cpp, Line 212
Failed to realloc DVD video files
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
je ne peut plus graver de dvd
que ce soit un film a l'aide de dvdshrink et nero7
ou bien un dvd de données nero 7 ou recordnow
les dvd vierges utilisé marchait bien pourtant avant
traxdata et verbatim dvd+r
ma config:
windowsxp
pentium4 2.53ghz
256mo de ram
pc hp pavillon764.fr
tou dorigine
1lecteur JLMS DVD ROM LTD166S
1graveur hp dvd writer 200J
le message derreur :
5C80001080100000000622518597
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero API version: 7.0.1.4
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 0, 1, 4
Recorder: <HP DVD Writer 200j> Version: 1.36 - HA 1 TA 1 - 7.0.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-22CAA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS DVD-ROM LTD-166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
JLMS DVD-ROM LTD-166S E: CDRom0
HP DVD Writer 200j F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261612kB)
Free physical memory: 145MB (149080kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.1.2006
NeroAPI
00:42:30 #1 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 932
Required file 'VIDEO_TS.IFO' is not present
00:42:30 #2 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 932
Required file 'VIDEO_TS.BUP' is not present
00:42:30 #3 Phase 117 File APIProgress.cpp, Line 278
DVD-Video files compliance test failed
00:42:31 #4 Text 0 File NeroAPIBurnFS.cpp, Line 212
Failed to realloc DVD video files
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Configuration: ma config: windowsxp pentium4 2.53ghz 256mo de ram pc hp pavillon764.fr tou dorigine 1lecteur JLMS DVD ROM LTD166S 1graveur hp dvd writer 200J
16 réponses
-
Bonjour,
Je souhaiterais savoir si tu as trouve une solution a ton probleme. Car j'ai le meme souci sauf que j'ai nero 6. Des que je tente de graver un dvd, j'ai le message "nero.exe a rencontre un pb et doit fermer " puis le message "drwtsn32.exe a rencontre un pb et doit fermer"
Merci pour ta reponse -
Bonjour,
J'ai le même problème depuis quelque temps impossible de graver des dvd (dvd-r ou dvd-rw) avec nero 6 ou convertXtodvd, alors qu'il y a encore 2 semaines pas de problème.
Par contre pour les cd, rien à signaler.
Le pire c'est que au bout d'une dizaine de minutes l'ordinateur s'éteint maintenant.
J'ai vérifié aspi de nero, j'ai des barres vertes.
Si vous avez la solution, je suis preneur lol.
Dans l'attente. -
+R, dans le doute, j'ai essaye avec des -R, mais le resultat est pas concluant.
le log ci dessous, je sais pas si ca peut t'aider :
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44
Version de Nero : 6.3.1.20 (Nero Express)
Graveur : <HP DVD Writer 200j> Version: 1.36 - HA 1 TA 1 - 6.3.1.20
Pilote d'adaptateur :<atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM : <TSSTcorp DVD-ROM TS-H352A>Version: TS01 - HA 1 TA 0 - 6.3.1.20
Pilote d'adaptateur :<atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R060J0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L300R0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp DVD-ROM TS-H352 E: CDRom0
HP DVD Writer 200j F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047924kB)
Free physical memory: 349MB (358224kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.3.2006
CD-ROM (ISO)
21:48:07 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
21:48:07 #2 Phase 90 File dlgbrnst.cpp, Line 1855
Protection contre les ruptures activée
21:48:07 #3 Text 0 File Reader.cpp, Line 126
Reader running
21:48:07 #4 Text 0 File Writer.cpp, Line 124
Writer HP DVD Writer 200j running
21:48:07 #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
21:48:07 #6 Text 0 File Burncd.cpp, Line 3173
Turn on Piste par piste, using CD-R/RW media
21:48:12 #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 353250 ( 78:32.00)
21:48:12 #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
21:48:12 #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: HP DVD Writer 200j;
CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
21:48:12 #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)
21:48:12 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 353251 (353251) = #353251/78:30.1
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 353249 blocks [HP DVD Writer 200j ]
--------------------------------------------------------------
21:48:12 #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HP DVD Writer 200j ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 723765248, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
353251 | lead-out | 1 | 0x00 | 0x41
21:48:12 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 353251 -> 353249.
21:48:12 #14 Phase 24 File dlgbrnst.cpp, Line 1855
Début de mise en cache des fichiers
21:48:13 #15 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
21:48:13 #16 Phase 25 File dlgbrnst.cpp, Line 1855
Cache des fichiers terminé
21:48:13 #17 Phase 36 File dlgbrnst.cpp, Line 1855
Début de gravure à 12x (1 800 Ko/s)
21:48:13 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:48:13 #19 Text 0 File Mmc.cpp, Line 20531
Set BUFE: supported -> ON
21:54:54 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
21:54:58 #21 Text 0 File Mmc.cpp, Line 15356
<HP DVD Writer 200j > start Close Session
21:55:21 #22 Phase 37 File dlgbrnst.cpp, Line 1855
Gravure terminée avec succès à 12x (1 800 Ko/s)
21:55:21 #23 Phase 78 File dlgbrnst.cpp, Line 1855
Vérification de la compilation
21:58:44 #24 Text 0 File UDFCompilationImpl.cpp, Line 1385
Nombre de fichiers=2, identiques=1, différents=0, inaccessibles=0, sautés=1.
21:58:44 #25 Phase 80 File dlgbrnst.cpp, Line 1855
Vérification de la compilation réussie
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.38a, size=16288 bytes, created 18/04/2002 02:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1a20-0100-0000-1794-8954-7889
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44
Version de Nero : 6.3.1.20 (Nero Express)
Graveur : <HP DVD Writer 200j> Version: 1.36 - HA 1 TA 1 - 6.3.1.20
Pilote d'adaptateur :<atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM : <TSSTcorp DVD-ROM TS-H352A>Version: TS01 - HA 1 TA 0 - 6.3.1.20
Pilote d'adaptateur :<atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R060J0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L300R0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp DVD-ROM TS-H352 E: CDRom0
HP DVD Writer 200j F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047924kB)
Free physical memory: 292MB (299372kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.3.2006
CD-ROM (ISO)
22:01:58 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
22:01:58 #2 Phase 90 File dlgbrnst.cpp, Line 1855
Protection contre les ruptures activée
22:01:58 #3 Text 0 File Reader.cpp, Line 126
Reader running
22:01:58 #4 Text 0 File Writer.cpp, Line 124
Writer HP DVD Writer 200j running
22:01:58 #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
22:01:58 #6 Text 0 File Burncd.cpp, Line 3173
Turn on Piste par piste, using CD-R/RW media
22:01:58 #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 328923 ( 73:07.48)
22:01:58 #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
22:01:58 #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: HP DVD Writer 200j;
CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc.
ATIP Data:
Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
22:01:58 #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:01:58 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 328924 (328924) = #328924/73:5.49
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 328922 blocks [HP DVD Writer 200j ]
--------------------------------------------------------------
22:01:58 #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HP DVD Writer 200j ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 673943552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
328924 | lead-out | 1 | 0x00 | 0x41
22:01:58 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 328924 -> 328922.
22:01:58 #14 Phase 24 File dlgbrnst.cpp, Line 1855
Début de mise en cache des fichiers
22:01:58 #15 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
22:01:58 #16 Phase 25 File dlgbrnst.cpp, Line 1855
Cache des fichiers terminé
22:01:58 #17 Phase 36 File dlgbrnst.cpp, Line 1855
Début de gravure à 12x (1 800 Ko/s)
22:01:58 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
22:01:58 #19 Text 0 File Mmc.cpp, Line 20531
Set BUFE: supported -> ON
22:08:14 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
22:08:17 #21 Text 0 File Mmc.cpp, Line 15356
<HP DVD Writer 200j > start Close Session
22:08:41 #22 Phase 37 File dlgbrnst.cpp, Line 1855
Gravure terminée avec succès à 12x (1 800 Ko/s)
22:08:41 #23 Phase 78 File dlgbrnst.cpp, Line 1855
Vérification de la compilation
22:11:54 #24 Text 0 File UDFCompilationImpl.cpp, Line 1385
Nombre de fichiers=2, identiques=1, différents=0, inaccessibles=0, sautés=1.
22:11:54 #25 Phase 80 File dlgbrnst.cpp, Line 1855
Vérification de la compilation réussie
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.38a, size=16288 bytes, created 18/04/2002 02:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1a20-0100-0000-1794-8954-7889
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44
Version de Nero : 6.3.1.20 (Nero Express)
Graveur : <HP DVD Writer 200j> Version: 1.36 - HA 1 TA 1 - 6.3.1.20
Pilote d'adaptateur :<atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM : <TSSTcorp DVD-ROM TS-H352A>Version: TS01 - HA 1 TA 0 - 6.3.1.20
Pilote d'adaptateur :<atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R060J0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L300R0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp DVD-ROM TS-H352 E: CDRom0
HP DVD Writer 200j F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047924kB)
Free physical memory: 537MB (550008kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.3.2006
Copie CD
14:08:07 #1 Phase 90 File dlgbrnst.cpp, Line 1855
Protection contre les ruptures activée
14:08:08 #2 Text 0 File Reader.cpp, Line 126
Reader running
14:08:08 #3 Text 0 File Writer.cpp, Line 124
Writer HP DVD Writer 200j running
14:08:08 #4 Phase 48 File dlgbrnst.cpp, Line 1855
Analyse du disque
14:08:08 #5 CDCOPY -1 File CDCopy.cpp, Line 1896
Le CD a un copyright
14:08:08 #6 Text 0 File CDCopy.cpp, Line 2116
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 9773 9772 ( 2:12.22)
Track 2: 9773 9773 ( 2:12.23) 22222 22221 ( 4:58.21)
Track 3: 22222 22222 ( 4:58.22) 33148 33147 ( 7:23.72)
Track 4: 33148 33148 ( 7:23.73) 47732 47731 ( 10:38.31)
Track 5: 47732 47732 ( 10:38.32) 51408 51407 ( 11:27.32)
Track 6: 51408 51408 ( 11:27.33) 66686 66685 ( 14:51.10)
Track 7: 66686 66686 ( 14:51.11) 77953 77952 ( 17:21.27)
Track 8: 77953 77953 ( 17:21.28) 95393 95392 ( 21:13.67)
Track 9: 95393 95393 ( 21:13.68) 108888 108887 ( 24:13.62)
Track 10: 108888 108888 ( 24:13.63) 112343 112342 ( 24:59.67)
Track 11: 112343 112343 ( 24:59.68) 123281 123280 ( 27:25.55)
Track 12: 123281 123281 ( 27:25.56) 138842 138841 ( 30:53.16)
Track 13: 138842 138842 ( 30:53.17) 154709 154708 ( 34:24.58)
Track 14: 154709 154709 ( 34:24.59) 157338 157337 ( 34:59.62)
Track 15: 157338 157338 ( 34:59.63) 167125 167124 ( 37:10.24)
Track 16: 167125 167125 ( 37:10.25) 179916 179915 ( 40:00.65)
Track 17: 179916 179916 ( 40:00.66) 184975 184974 ( 41:08.24)
Track 18: 196375 196375 ( 43:40.25) 199571 199570 ( 44:22.70)
14:08:08 #7 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc look like CD Extra
01. 0 - 9773 = 9773, audio (TRM_AUDIO_NOPRE, block size 2352)
02. 9773 - 22222 = 12449, audio (TRM_AUDIO_NOPRE, block size 2352)
03. 22222 - 33148 = 10926, audio (TRM_AUDIO_NOPRE, block size 2352)
04. 33148 - 47732 = 14584, audio (TRM_AUDIO_NOPRE, block size 2352)
05. 47732 - 51408 = 3676, audio (TRM_AUDIO_NOPRE, block size 2352)
06. 51408 - 66686 = 15278, audio (TRM_AUDIO_NOPRE, block size 2352)
07. 66686 - 77953 = 11267, audio (TRM_AUDIO_NOPRE, block size 2352)
08. 77953 - 95393 = 17440, audio (TRM_AUDIO_NOPRE, block size 2352)
09. 95393 - 108888 = 13495, audio (TRM_AUDIO_NOPRE, block size 2352)
10. 108888 - 112343 = 3455, audio (TRM_AUDIO_NOPRE, block size 2352)
11. 112343 - 123281 = 10938, audio (TRM_AUDIO_NOPRE, block size 2352)
12. 123281 - 138842 = 15561, audio (TRM_AUDIO_NOPRE, block size 2352)
13. 138842 - 154709 = 15867, audio (TRM_AUDIO_NOPRE, block size 2352)
14. 154709 - 157338 = 2629, audio (TRM_AUDIO_NOPRE, block size 2352)
15. 157338 - 167125 = 9787, audio (TRM_AUDIO_NOPRE, block size 2352)
16. 167125 - 179916 = 12791, audio (TRM_AUDIO_NOPRE, block size 2352)
17. 179916 - 184975 = 5059, audio (TRM_AUDIO_NOPRE, block size 2352)
18. 196375 - 199571 = 3196, data (TRM_DATA_RAW_MODE2, block size 2352)
14:09:10 #8 Text 0 File Burncd.cpp, Line 3173
Turn on Disque entier, using CD-R/RW media
14:09:10 #9 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 199570 ( 44:22.70)
14:09:10 #10 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
14:09:10 #11 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: HP DVD Writer 200j;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
14:09:10 #12 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
14:09:10 #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_AUDIO_NOPRE (1 - Audio)
2 indices, index0 (150) not provided
original disc pos #0 + 9773 (9773) = #9773/2:10.23
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 9773 blocks [HP DVD Writer 200j ]
1: TRM_AUDIO_NOPRE (2 - Audio)
2 indices, index0 (0) provided
original disc pos #9773 + 12449 (12449) = #22222/4:56.22
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 12449 blocks [HP DVD Writer 200j ]
2: TRM_AUDIO_NOPRE (3 - Audio)
2 indices, index0 (0) provided
original disc pos #22222 + 10926 (10926) = #33148/7:21.73
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 10926 blocks [HP DVD Writer 200j ]
3: TRM_AUDIO_NOPRE (4 - Audio)
2 indices, index0 (0) provided
original disc pos #33148 + 14584 (14584) = #47732/10:36.32
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14584 blocks [HP DVD Writer 200j ]
4: TRM_AUDIO_NOPRE (5 - Audio)
2 indices, index0 (0) provided
original disc pos #47732 + 3676 (3676) = #51408/11:25.33
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 3676 blocks [HP DVD Writer 200j ]
5: TRM_AUDIO_NOPRE (6 - Audio)
2 indices, index0 (0) provided
original disc pos #51408 + 15278 (15278) = #66686/14:49.11
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15278 blocks [HP DVD Writer 200j ]
6: TRM_AUDIO_NOPRE (7 - Audio)
2 indices, index0 (0) provided
original disc pos #66686 + 11267 (11267) = #77953/17:19.28
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 11267 blocks [HP DVD Writer 200j ]
7: TRM_AUDIO_NOPRE (8 - Audio)
2 indices, index0 (0) provided
original disc pos #77953 + 17440 (17440) = #95393/21:11.68
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17440 blocks [HP DVD Writer 200j ]
8: TRM_AUDIO_NOPRE (9 - Audio)
2 indices, index0 (0) provided
original disc pos #95393 + 13495 (13495) = #108888/24:11.63
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 13495 blocks [HP DVD Writer 200j ]
9: TRM_AUDIO_NOPRE (10 - Audio)
2 indices, index0 (0) provided
original disc pos #108888 + 3455 (3455) = #112343/24:57.68
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 3455 blocks [HP DVD Writer 200j ]
10: TRM_AUDIO_NOPRE (11 - Audio)
2 indices, index0 (0) provided
original disc pos #112343 + 10938 (10938) = #123281/27:23.56
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 10938 blocks [HP DVD Writer 200j ]
11: TRM_AUDIO_NOPRE (12 - Audio)
2 indices, index0 (0) provided
original disc pos #123281 + 15561 (15561) = #138842/30:51.17
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15561 blocks [HP DVD Writer 200j ]
12: TRM_AUDIO_NOPRE (13 - Audio)
2 indices, index0 (0) provided
original disc pos #138842 + 15867 (15867) = #154709/34:22.59
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15867 blocks [HP DVD Writer 200j ]
13: TRM_AUDIO_NOPRE (14 - Audio)
2 indices, index0 (0) provided
original disc pos #154709 + 2629 (2629) = #157338/34:57.63
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 2629 blocks [HP DVD Writer 200j ]
14: TRM_AUDIO_NOPRE (15 - Audio)
2 indices, index0 (0) provided
original disc pos #157338 + 9787 (9787) = #167125/37:8.25
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 9787 blocks [HP DVD Writer 200j ]
15: TRM_AUDIO_NOPRE (16 - Audio)
2 indices, index0 (0) provided
original disc pos #167125 + 12791 (12791) = #179916/39:58.66
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 12791 blocks [HP DVD Writer 200j ]
16: TRM_AUDIO_NOPRE (17 - Audio)
2 indices, index0 (0) provided
original disc pos #179916 + 5059 (5059) = #184975/41:6.25
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 5059 blocks [HP DVD Writer 200j ]
--------------------------------------------------------------
17: TRM_DATA_MODE2_2336 (18 - Données (mode 2))
2 indices, index0 (150) not provided
original disc pos #196375 + 3196 (3196) = #199571/44:20.71
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 3196 blocks [HP DVD Writer 200j ]
--------------------------------------------------------------
14:09:10 #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HP DVD Writer 200j ] for write in CUE-sheet-DAO + TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 18:
1: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 0 352800 23338896, ISRC ""
2: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 23338896 23338896 52618944, ISRC ""
3: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 52618944 52618944 78316896, ISRC ""
4: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 78316896 78316896 112618464, ISRC ""
5: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 112618464 112618464 121264416, ISRC ""
6: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 121264416 121264416 157198272, ISRC ""
7: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 157198272 157198272 183698256, ISRC ""
8: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 183698256 183698256 224717136, ISRC ""
9: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 224717136 224717136 256457376, ISRC ""
10: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 256457376 256457376 264583536, ISRC ""
11: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 264583536 264583536 290309712, ISRC ""
12: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 290309712 290309712 326909184, ISRC ""
13: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 326909184 326909184 364228368, ISRC ""
14: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 364228368 364228368 370411776, ISRC ""
15: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 370411776 370411776 393430800, ISRC ""
16: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 393430800 393430800 423515232, ISRC ""
17: TRM_AUDIO_NOPRE, 2352/0x00, FilePos 423515232 423515232 435414000, ISRC ""
18: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 435414000 435766800 443283792, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x01
-150 | 1 | 0 | 0x00 | 0x01
0 | 1 | 1 | 0x00 | 0x01
9773 | 2 | 0 | 0x00 | 0x01
9773 | 2 | 1 | 0x00 | 0x01
22222 | 3 | 0 | 0x00 | 0x01
22222 | 3 | 1 | 0x00 | 0x01
33148 | 4 | 0 | 0x00 | 0x01
33148 | 4 | 1 | 0x00 | 0x01
47732 | 5 | 0 | 0x00 | 0x01
47732 | 5 | 1 | 0x00 | 0x01
51408 | 6 | 0 | 0x00 | 0x01
51408 | 6 | 1 | 0x00 | 0x01
66686 | 7 | 0 | 0x00 | 0x01
66686 | 7 | 1 | 0x00 | 0x01
77953 | 8 | 0 | 0x00 | 0x01
77953 | 8 | 1 | 0x00 | 0x01
95393 | 9 | 0 | 0x00 | 0x01
95393 | 9 | 1 | 0x00 | 0x01
108888 | 10 | 0 | 0x00 | 0x01
108888 | 10 | 1 | 0x00 | 0x01
112343 | 11 | 0 | 0x00 | 0x01
112343 | 11 | 1 | 0x00 | 0x01
123281 | 12 | 0 | 0x00 | 0x01
123281 | 12 | 1 | 0x00 | 0x01
138842 | 13 | 0 | 0x00 | 0x01
138842 | 13 | 1 | 0x00 | 0x01
154709 | 14 | 0 | 0x00 | 0x01
154709 | 14 | 1 | 0x00 | 0x01
157338 | 15 | 0 | 0x00 | 0x01
157338 | 15 | 1 | 0x00 | 0x01
167125 | 16 | 0 | 0x00 | 0x01
167125 | 16 | 1 | 0x00 | 0x01
179916 | 17 | 0 | 0x00 | 0x01
179916 | 17 | 1 | 0x00 | 0x01
184975 | lead-out | 1 | 0x00 | 0x01
191725 | lead-in | 0 | 0x00 | 0x41
196225 | 18 | 0 | 0x00 | 0x41
196375 | 18 | 1 | 0x00 | 0x41
199571 | lead-out | 1 | 0x00 | 0x41
14:09:11 #15 Phase 36 File dlgbrnst.cpp, Line 1855
Début de gravure à 12x (1 800 Ko/s)
14:09:11 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
14:09:11 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #9773): write at #9773
14:09:11 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #22222): write at #22222
14:09:11 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #33148): write at #33148
14:09:11 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #47732): write at #47732
14:09:11 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #51408): write at #51408
14:09:11 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #66686): write at #66686
14:09:11 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #77953): write at #77953
14:09:11 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 8 (relocatable, no disc pos, no patch infos, orig at #95393): write at #95393
14:09:11 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 9 (relocatable, no disc pos, no patch infos, orig at #108888): write at #108888
14:09:11 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 10 (relocatable, no disc pos, no patch infos, orig at #112343): write at #112343
14:09:11 #27 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 11 (relocatable, no disc pos, no patch infos, orig at #123281): write at #123281
14:09:11 #28 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 12 (relocatable, no disc pos, no patch infos, orig at #138842): write at #138842
14:09:11 #29 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 13 (relocatable, no disc pos, no patch infos, orig at #154709): write at #154709
14:09:11 #30 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 14 (relocatable, no disc pos, no patch infos, orig at #157338): write at #157338
14:09:11 #31 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 15 (relocatable, no disc pos, no patch infos, orig at #167125): write at #167125
14:09:11 #32 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 16 (relocatable, no disc pos, no patch infos, orig at #179916): write at #179916
14:09:11 #33 Text 0 File Mmc.cpp, Line 15916
StartDAO : CD-Text - Off
14:09:11 #34 Text 0 File Mmc.cpp, Line 20531
Set BUFE: supported -> ON
14:09:11 #35 Text 0 File Mmc.cpp, Line 16203
CueData, Len=160
01 00 00 01 00 00 00 00
01 01 00 00 00 00 00 00
01 01 01 00 00 00 02 00
01 02 01 00 00 02 0c 17
01 03 01 00 00 04 3a 16
01 04 01 00 00 07 17 49
01 05 01 00 00 0a 26 20
01 06 01 00 00 0b 1b 21
01 07 01 00 00 0e 33 0b
01 08 01 00 00 11 15 1c
01 09 01 00 00 15 0d 44
01 0a 01 00 00 18 0d 3f
01 0b 01 00 00 18 3b 44
01 0c 01 00 00 1b 19 38
01 0d 01 00 00 1e 35 11
01 0e 01 00 00 22 18 3b
01 0f 01 00 00 22 3b 3f
01 10 01 00 00 25 0a 19
01 11 01 00 00 28 00 42
01 aa 01 01 00 29 08 19
14:14:14 #36 Text 0 File WriterStatus.cpp, Line 115
<HP DVD Writer 200j > start writing Lead-Out at LBA 184975 (2D28Fh), lenght 0 blocks
14:14:27 #37 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
14:14:27 #38 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
14:14:27 #39 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 17 (relocatable, no disc pos, patch infos, orig at #196375): write at #196375
14:14:27 #40 Text 0 File Mmc.cpp, Line 15916
StartDAO : CD-Text - Off
14:14:27 #41 Text 0 File Mmc.cpp, Line 20531
Set BUFE: supported -> ON
14:14:27 #42 Text 0 File Mmc.cpp, Line 16203
CueData, Len=32
41 00 00 34 00 00 00 00
41 12 00 21 00 2b 26 19
41 12 01 21 00 2b 28 19
41 aa 01 34 00 2c 16 47
14:14:40 #43 Text 0 File WriterStatus.cpp, Line 115
<HP DVD Writer 200j > start writing Lead-Out at LBA 199571 (30B93h), lenght 0 blocks
14:14:47 #44 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
14:14:47 #45 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
14:14:47 #46 Phase 37 File dlgbrnst.cpp, Line 1855
Gravure terminée avec succès à 12x (1 800 Ko/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.38a, size=16288 bytes, created 18/04/2002 02:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1a20-0100-0000-1794-8954-7889
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44
Version de Nero : 6.3.1.20 (Nero Express)
Graveur : <HP DVD Writer 200j> Version: 1.36 - HA 1 TA 1 - 6.3.1.20
Pilote d'adaptateur :<atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM : <TSSTcorp DVD-ROM TS-H352A>Version: TS01 - HA 1 TA 0 - 6.3.1.20
Pilote d'adaptateur :<atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R060J0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L300R0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp DVD-ROM TS-H352 E: CDRom0
HP DVD Writer 200j F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047924kB)
Free physical memory: 540MB (553280kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.3.2006
CD-ROM (ISO)
16:10:40 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
16:10:40 #2 Phase 90 File dlgbrnst.cpp, Line 1855
Protection contre les ruptures activée
16:10:40 #3 Text 0 File Reader.cpp, Line 126
Reader running
16:10:40 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
16:10:40 #5 Text 0 File Burncd.cpp, Line 3173
Turn on Piste par piste, using CD-R/RW media
16:10:46 #6 Phase 40 File dlgbrnst.cpp, Line 1855
Interruption par l'utilisateur
16:10:46 #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 359950 ( 80:01.25)
16:10:46 #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
16:10:46 #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: HP DVD Writer 200j
Medium not present
16:10:46 #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Not enough free discspace.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.38a, size=16288 bytes, created 18/04/2002 02:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1a20-0100-0000-1794-8954-7889
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44
Version de Nero : 6.3.1.20 (Nero Express)
Graveur : <HP DVD Writer 200j> Version: 1.36 - HA 1 TA 1 - 6.3.1.20
Pilote d'adaptateur :<atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM : <TSSTcorp DVD-ROM TS-H352A>Version: TS01 - HA 1 TA 0 - 6.3.1.20
Pilote d'adaptateur :<atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R060J0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L300R0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp DVD-ROM TS-H352 E: CDRom0
HP DVD Writer 200j F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047924kB)
Free physical memory: 449MB (460744kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.3.2006
CD-ROM (ISO)
16:11:38 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
16:11:38 #2 Phase 90 File dlgbrnst.cpp, Line 1855
Protection contre les ruptures activée
16:11:38 #3 Text 0 File Reader.cpp, Line 126
Reader running
16:11:38 #4 Text 0 File Writer.cpp, Line 124
Writer HP DVD Writer 200j running
16:11:38 #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
16:11:38 #6 Text 0 File Burncd.cpp, Line 3173
Turn on Piste par piste, using CD-R/RW media
16:11:39 #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 332432 ( 73:54.32)
16:11:39 #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
16:11:39 #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: HP DVD Writer 200j;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
16:11:39 #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:11:39 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 332433 (332433) = #332433/73:52.33
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 332431 blocks [HP DVD Writer 200j ]
--------------------------------------------------------------
16:11:39 #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HP DVD Writer 200j ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 681129984, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
332433 | lead-out | 1 | 0x00 | 0x41
16:11:39 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 332433 -> 332431.
16:11:39 #14 Phase 24 File dlgbrnst.cpp, Line 1855
Début de mise en cache des fichiers
16:11:39 #15 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
16:11:39 #16 Phase 25 File dlgbrnst.cpp, Line 1855
Cache des fichiers terminé
16:11:39 #17 Phase 36 File dlgbrnst.cpp, Line 1855
Début de gravure à 12x (1 800 Ko/s)
16:11:40 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
16:11:40 #19 Text 0 File Mmc.cpp, Line 20531
Set BUFE: supported -> ON
16:17:58 #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
16:18:01 #21 Text 0 File Mmc.cpp, Line 15356
<HP DVD Writer 200j > start Close Session
16:18:25 #22 Phase 37 File dlgbrnst.cpp, Line 1855
Gravure terminée avec succès à 12x (1 800 Ko/s)
16:18:25 #23 Phase 78 File dlgbrnst.cpp, Line 1855
Vérification de la compilation
16:21:41 #24 Text 0 File UDFCompilationImpl.cpp, Line 1385
Nombre de fichiers=1, identiques=1, différents=0, inaccessibles=0, sautés=0.
16:21:41 #25 Phase 80 File dlgbrnst.cpp, Line 1855
Vérification de la compilation réussie
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.38a, size=16288 bytes, created 18/04/2002 02:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1a20-0100-0000-1794-8954-7889
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.1.4
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <TSSTcorp DVD-ROM TS-H352A>Version: TS01 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R060J0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L300R0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp DVD-ROM TS-H352A E: CDRom0
HP DVD Writer 200j F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047924kB)
Free physical memory: 553MB (567264kB)
Memory in use : 45
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.3.2006
CD-ROM (ISO)
22:10:02 #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
22:10:03 #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 192KB of Memory
22:10:03 #3 Text 0 File Reader.cpp, Line 124
Reader running
22:10:03 #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
22:10:03 #5 Text 0 File Burncd.cpp, Line 3305
Turn on Track-At-Once, using CD-R/RW media
22:10:03 #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 445499 ( 99:01.74)
Last address to be written: 332432 ( 73:54.32)
22:10:03 #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
22:10:03 #8 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:10:03 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 332433 (332433) = #332433/73:52.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 332433 blocks [Image Recorder]
--------------------------------------------------------------
22:10:06 #10 Phase 40 File dlgbrnst.cpp, Line 1685
Aborted by user
22:10:06 #11 Text 0 File Burncd.cpp, Line 2223
User aborted on choose image file-name
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.38a, size=16288 bytes, created 18/04/2002 02:02:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1a20-0100-0000-1794-8954-7889
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 12:54:32
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <HP DVD Writer 200j> Version: 1.36 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp DVD-ROM TS-H352A>Version: TS01 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R060J0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L300R0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp DVD-ROM TS-H352A E: CDRom0
HP DVD Writer 200j F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047924kB)
Free physical memory: 551MB (565228kB)
Memory in use : 46
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.3.2006
CD-ROM (ISO)
22:10:41 #1 Text 0 File Isodoc.cpp, Line 6475
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
22:10:41 #2 Text 0 File Burncd.cpp, Line 3012
HP DVD Writer 200j
Buffer underrun protection activated
22:10:41 #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
22:10:41 #4 Text 0 File Reader.cpp, Line 124
Reader running
22:10:41 #5 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
22:10:41 #6 Text 0 File Burncd.cpp, Line 3305
Turn on Track-At-Once, using CD-R/RW media
22:11:11 #7 Phase 40 File dlgbrnst.cpp, Line 1685
Aborted by user
22:11:11 #8 Text 0 File DlgWaitCD.cpp, Line 281
Disc check failed: Medium not allowed (Wrong CD)
22:11:11 #9 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
22:11:11 #10 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: HP DVD Writer 200j
Medium not present
22:11:11 #11 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Compilation cannot be written on that medium type.
(Medium in drive: CD-ROM. Medium required by compilation: CD-R/RW.)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.38a, size=16288 bytes, created 18/04/2002 02:02:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1A20-020N-0130-1842-1128-1933*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <HP DVD Writer 200j> Version: 1.36 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TSSTcorp DVD-ROM TS-H352A>Version: TS01 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R060J0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L300R0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp DVD-ROM TS-H352 E: CDRom0
HP DVD Writer 200j F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047924kB)
Free physical memory: 435MB (445484kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.3.2006
Copie CD
21:19:46 #1 Text 0 File Burncd.cpp, Line 2868
HP DVD Writer 200j
Protection contre les ruptures activés
21:19:46 #2 Text 0 File Reader.cpp, Line 127
Reader running
21:19:46 #3 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 200j running
21:19:46 #4 Phase 48 File dlgbrnst.cpp, Line 1832
Analyzing disc
21:19:46 #5 CDCOPY -1 File CDCopy.cpp, Line 1907
The CD is copyrighted
21:19:47 #6 Text 0 File CDCopy.cpp, Line 2123
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 357127 357126 ( 79:23.51)
21:19:47 #7 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 357127 = 357127, data (TRM_DATA_MODE1, block size 2048)
21:19:47 #8 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using CD-R/RW media
21:19:47 #9 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 357126 ( 79:23.51)
21:19:47 #10 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
21:19:47 #11 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: HP DVD Writer 200j;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
21:19:47 #12 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:19:47 #13 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Données (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 357127 (357127) = #357127/79:21.52
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 357127 blocks [HP DVD Writer 200j]
--------------------------------------------------------------
21:19:47 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [HP DVD Writer 200j] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 731703296, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
357127 | lead-out | 1 | 0x41 | 0x00
21:19:49 #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 12x (1 800 Ko/s)
21:19:49 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
21:19:49 #17 Text 0 File Mmc.cpp, Line 16539
StartDAO : CD-Text - Off
21:19:49 #18 Text 0 File Mmc.cpp, Line 21319
Set BUFE: Buffer underrun protection -> ON
21:19:49 #19 Text 0 File Mmc.cpp, Line 16826
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 4f 17 34
21:27:13 #20 Text 0 File WriterStatus.cpp, Line 116
<HP DVD Writer 200j > start writing Lead-Out at LBA 357127 (57307h), lenght 0 blocks
21:27:13 #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
21:27:25 #22 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 12x (1 800 Ko/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.38a, size=16288 bytes, created 18/04/2002 02:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 06:59:42 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
1A20-020N-0130-1842-1128-1933*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:32
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <HP DVD Writer 200j> Version: 1.36 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TSSTcorp DVD-ROM TS-H352A>Version: TS01 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 4R060J0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6L300R0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : TSSTcorp DVD-ROM TS-H352A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TSSTcorp DVD-ROM TS-H352 E: CDRom0
HP DVD Writer 200j F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047924kB)
Free physical memory: 481MB (493552kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.3.2006
Copie CD
13:43:12 #1 Text 0 File Burncd.cpp, Line 2868
HP DVD Writer 200j
Protection contre les ruptures activés
13:43:12 #2 Text 0 File Reader.cpp, Line 127
Reader running
13:43:12 #3 Phase 48 File dlgbrnst.cpp, Line 1832
Analyzing disc
13:43:12 #4 CDCOPY -1 File CDCopy.cpp, Line 1907
The CD is copyrighted
13:43:13 #5 Text 0 File CDCopy.cpp, Line 2123
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 16517 16516 ( 3:42.16)
Track 2: 16517 16517 ( 3:42.17) 28590 28589 ( 6:23.14)
Track 3: 28590 28590 ( 6:23.15) 44425 44424 ( 9:54.24)
Track -
re bjr
tu prends quoi comme dvd ?
dvd-r/+r ?
A+ -
Normalement il grave les dvd, c'est indique sur le lien que tu m'as passe..., non ?
C'est pareil avec d'autres films
Merci -
sinon regarde si le prb ne vient pas de ton film en gravant par ex autre chose musique, photos...etc
A+ -
bjr
avec cd burner il grave les dvd ?
bonnes vacances
A+
marc -
Je viens d'installer cdburner xp, quand je mets le dvd dans le lecteur, il semble qu'il ne le reconnait pas. En fait j'arrive a choisir mes divx pour les copier (dans nero ca buge souvent a ce moment) et au omment de copier sur dvd, il indique qu'il y a un pb avec mon media.
Je ne sais pas quand tu pourras me repondre mais je pars ce soir pour 15jours, ne t'etonnes pas si je ne donne plus de nouvelles si je n'ai pas la reponse dans la journee.
Merci -
bjr
si un jour la restauration système a été interrompu, fortement possible que le pb vient de ça.
moi je grave avec néro des cd/dvd selon les formats sans prb.
Pour un prg gratuit, afin de tester le fonctionnement de ton graveur, essayes avec ceci
http://www.gratilog.net/cd1.htm
A+
marc -
desinstallation et reinstallation de nero deja faite et c'est pareil. As tu un logiciel de gravure gratuit a me conseiller pour tester ?
Quand tu dis nero.exe = fichier executable nero, veux tu dire que mon pb vient de nero et non de mon graveur ?
J'ai essaye une restauration assez lointaine l'autre jour, et du coup cela mettait le bazar dans mon anti virus sans que je puisse le mettre a jour, du coup, j'ai abandonne et j'ai annule ma restauration ! De plus, je ne suis pas persuade que graver un dvd avec nero est bien fonctionne un jour, car j'utilisais davantage de cd...
Merci
A+
Kristell -
bjr
dur dur essaye la solution désinstaller et réinstaller néro ou avec un autre logiciel de gravure afin de voir si le prb persiste
nero.exe= fichier executable nero
A+
marc
ps: as tu fais une restauration du système à une date antérieur au prb ? -
Je ne comprends pas ton message...je prends en effet le media dvd avec startsmart ou express.
Mes divx depassent 710, c'est la raison pour laquelle je souhaite les mettre sur dvd.
Merci -
Je ne comprends pas ton message...je choisis en effet le menu dvd dans startsmart.
Mes divx depassent pour certains 710 Mb, c'est pour ca que je veux les mettre sur dvd.
Merci par avance -
bjr
Ok mais les divx que je veux mettre depasse la capacite d'un cd, je veux donc les mettre sur dvd.
Je prends nero express ou startsmart...ca buge avec les 2
Pas de ? dans gest de periph, tout semble fonctionner.
Merci -
bsr,
Le probleme, c'est que je ne sais pas si cette manip a fonctionne un jour (c'est la premiere fois que je grave des divx sur dvd, ce que j'avais l'habitude de faire, c'etait de creer des dvd de films persos mais je fais ca avec un autre logiciel que nero).L'autre jour, j'ai fait une restauration systeme et mon antivirus commencait a deconner (du style je ne pouvais plus le mettre a jour). j'ai donc peur d'enchainer les bourdes !!! Y'aurait il une autre facon de proceder ?
J'ai mis a jour le firmware de mon graveur et le pb persiste. Serais ce possible que cela vienne de nero, pb de parametres ou bien du graveur ? Graver un cd avec nero ne pose pas de pb.
Merci beaucoup-
bjr
le divx est un format de compréssion qui rend capable de graver un film sur un média de CD.
Le prb par la suite, c'est que certain dvd de salon ne prennent pas en charge le divx, alors impossible de regarder le film.
Pour graver avec néro, prends tu néro express/burning/ou néro startSmart.
Regarde dans
Démarrer/pann.de conf./système/matériels/gestionnaires de périph.
si dans lecteur de cd/dvd tout est ok ( pas de ?)
A+
-
-
bjr
demarrer accessoires outils systemes restauration systemes (case cocher >restaurer mon ordinateur a uneheure anterieure suivant dans le tableau de gauche tu choisis une date juste avant ton probleme et a droite tu choisis l'heure(attention tu peut prendre que les dates afficher en gros caractere) suivant suivant
bonne chance
essaye de desinstaller tes codecs et redemarre ton pc avant de faire une restauration systemes
A+
