Ordi qui reboote, erreur minidump/ sysdata
CelebrenIthil
Messages postés
14
Statut
Membre
-
Hypia. -
Hypia. -
Bonjour tous, je m'excuse d'avance de la longeur de mon message.
Alors voilà, hier, j'ai installé un jeu online, S4 league d'alaplaya (http://s4.fr.alaplaya.eu/), j'y jour avec des copains pendant quelques heures, soudain tout le monde se font booter dehors (vive les open beta). Pas très grave; par contre le client du jeu reste ouvert mais il est planté. J'essaie de terminer l'application et autres mais toutes mes tentatives échouent, finalement je redémarre mon ordi car l'application plantée ralentissait tout et puis elle voulait plus partir de mon écran et yada yada.
Et donc, premier mauvais signe, l'ordi redémarre puis dès que Windows commencer à s'ouvrir, pouf! Il redémarre! (on voit aussi brièvement un écran bleu mais c'est trop court) Il fait cela encore quelques fois à ma grande confusion mais il finit par réussir à démérrer correctement. Sauf que paf, des messages d'erreurs dont l'effrayant "Windows has recovered from a serious error" (oui mon XP est en anglais).
J'envoie le rapport d'erreur a Windows, rapport qui en passant a l'air de ceci:
https://app.photobucket.com/
Je crois naïvement que c'est un problème passager causé par mon reboot, donc je vaque à mes occupations et ferme mon ordi le soir. Mais en l'ouvrant aujourd'hui, encore le redémarrage en boucle, mais cette fois il ne semble pas arriver à reprendre le dessus. Je m'inquiète de plus en plus, referme mon ordi plus le ré-ouvre, après 1 ou 2 essais enfin il démarre correctement. Les messages d'erreur me reviennent, et là je panique un peu.
Évidemment je vais me renseigner sur google à propos de ce fameux sysdata.xml et ce fichier .dmp et je fait aussi un scan AVG complet et Spybot S&D. Aucun des deux n'a trouvé quoi que ce soit.
Pendant ce temps je cherche des infos sur mon problème, je lis ceci
http://www.commentcamarche.net/forum/affich 2068392 redemarrage en boucle
cela: http://sysdata.free.fr/?file=Sections&op=article&artid=16
et ceci: http://www.laboratoire-microsoft.org/articles/teched_2002/4/
Mais bon de 1, je crois comprendre que ça peut présager de n'importe quoi, allant de drivers qui marchent mal, de trucs corrompus, d'attaque virale (mais bon AVG/Spybot on rien vu), de hardware qui entre en conflit avec un autre, au manque de tension électrique ou aux ventilateurs bloqués.
Jusqu'à présent mon ordi allait très bien, je n'ai pas installé de nouveau hardware/joué dans mon courant électrique. Je peux voir à l'intérieur de mon ordi par un panneau en plexiglas et bien qu'un tantinet poussièreux, le ventilateur semble tourner. La seule chose; j'ai branché une souris USB et une à port souris en même temps car il y a une dont la roulette semblait ne pas marcher dans le jeu et je voulais tester.
Je viens d'en débrancher une mais bon, je doute que des souris plug-and-play aient causés un crash majeur... >_>
Si c'est un virus, je sais pas. Un ami dit que ça lui ai arrivé sur son iMac avec Windows installé dessus mais il a simplement viré son Windows de sa machine, solution invalide dans mon cas. :(
Et bon de 2, je suis sois franchement grippée, soit franchement allergique, mais bon j'ai les sinus près à exploser, un mal de tête carabiné et du mal à simplement lire, alors comprendre du charabia informatique...
J'ai essayé de suivre les indications dans les liens internet que je vous ai donné (et quelques autres) mais j'avoue que j'y comprends à moitié, j'ai vraiment besoin de l'aide de quelqu'un qui comprend!
J'ai peur de fermer/redémarrer mon ordi, au cas où cette fois il n'ouvrira plus, dans quel cas ça va très mal pour moi. Alors j'ai peur d'aller utiliser le mode sans erreur et ce genre de choses qui nécessite de fermer mon ordi. ;_;
Je vous envoie les Infos sur la config de mon ordi:
Processor: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz (2 CPUs)
Memory: 2048MB RAM
Hard Drive: 250 GB
Video Card: NVIDIA GeForce 8600 GT
Monitor: Plug and Play Monitor
Sound Card: SoundMAX HD Audio
Keyboard: USB Root Hub
Mouse: USB Root Hub
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227-2254)
J'ai aussi fait un scan Hijackthis:
Log Hijackthis:
Logfile of HijackThis v1.99.1
Scan saved at 10:58:46, on 2008-09-10
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Wintab32.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\LogiShrd\LVMVFM\LVPrcSrv.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Google\Common\Google Updater\GoogleUpdaterService.exe
C:\Program Files\Common Files\LogiShrd\LVCOMSER\LVComSer.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\AlienGUIse\wbload.exe
C:\Program Files\Linksys Wireless-G PCI Wireless Network Monitor\WLService.exe
C:\Program Files\Linksys Wireless-G PCI Wireless Network Monitor\WMP54Gv4.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\AVG\AVG8\avgemc.exe
C:\Program Files\Common Files\LogiShrd\LVCOMSER\LVComSer.exe
C:\Program Files\Analog Devices\Core\smax4pnp.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\Program Files\Java\jre1.6.0_02\bin\jusched.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\WINDOWS\system32\ZPOINT32.exe
C:\Program Files\Common Files\InstallShield\UpdateService\issch.exe
C:\Program Files\Common Files\LogiShrd\LComMgr\Communications_Helper.exe
C:\Program Files\Logitech\QuickCam\Quickcam.exe
C:\PROGRA~1\AVG\AVG8\avgtray.exe
C:\Program Files\Common Files\Ahead\Lib\NMBgMonitor.exe
C:\Program Files\Common Files\Ahead\Lib\NMIndexStoreSvr.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Logishrd\LQCVFX\COCIManager.exe
C:\Program Files\Skype\Phone\Skype.exe
C:\Program Files\DAEMON Tools\daemon.exe
C:\program files\games\nclauncher\NCLauncher.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\HP\Digital Imaging\bin\hpqtra08.exe
C:\Program Files\Google\Google Updater\GoogleUpdater.exe
C:\Program Files\Stardock\ObjectDock\ObjectDock.exe
C:\Program Files\Skype\Plugin Manager\skypePM.exe
C:\Program Files\Xfire\xfire.exe
C:\WINDOWS\system32\mspaint.exe
C:\Program Files\HP\Digital Imaging\bin\hpqSTE08.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\WINDOWS\system32\rundll32.exe
C:\Program Files\WinRAR\WinRAR.exe
C:\Documents and Settings\Owner\Desktop\Hijackthis\HijackThis.exe
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = https://www.google.ca/?gws_rd=ssl
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = https://www.msn.com/fr-fr/?ocid=iehp
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = https://www.bing.com/?toHttps=1&redig=5FC791212101479BAFBE1A679848B1AF
O2 - BHO: Adobe PDF Reader Link Helper - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelper.dll
O2 - BHO: BitComet ClickCapture - {39F7E362-828A-4B5A-BCAF-5B79BFDFEA60} - C:\Documents and Settings\Owner\Desktop\Utilitaires Internet\BitComet\tools\BitCometBHO_1.1.8.30.dll (file missing)
O2 - BHO: Spybot-S&D IE Protection - {53707962-6F74-2D53-2644-206D7942484F} - C:\PROGRA~1\SPYBOT~1\SDHelper.dll
O2 - BHO: SSVHelper Class - {761497BB-D6F0-462C-B6EB-D4DAF1D92D43} - C:\Program Files\Java\jre1.6.0_02\bin\ssv.dll
O2 - BHO: Google Toolbar Helper - {AA58ED58-01DD-4d91-8333-CF10577473F7} - c:\program files\google\googletoolbar1.dll
O2 - BHO: Google Toolbar Notifier BHO - {AF69DE43-7D58-4638-B6FA-CE66B5AD205D} - C:\Program Files\Google\GoogleToolbarNotifier\3.0.1225.9868\swg.dll
O3 - Toolbar: &Google - {2318C2B1-4965-11d4-9B18-009027A5CD4F} - c:\program files\google\googletoolbar1.dll
O4 - HKLM\..\Run: [SoundMAXPnP] C:\Program Files\Analog Devices\Core\smax4pnp.exe
O4 - HKLM\..\Run: [NvCplDaemon] RUNDLL32.EXE C:\WINDOWS\system32\NvCpl.dll,NvStartup
O4 - HKLM\..\Run: [nwiz] nwiz.exe /install
O4 - HKLM\..\Run: [NvMediaCenter] RUNDLL32.EXE C:\WINDOWS\system32\NvMcTray.dll,NvTaskbarInit
O4 - HKLM\..\Run: [Name of App] C:\Program Files\Utilitaires Window\SAMSUNG\FW LiveUpdate\FWManager.exe r
O4 - HKLM\..\Run: [NeroFilterCheck] C:\Program Files\Common Files\Ahead\Lib\NeroCheck.exe
O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files\Java\jre1.6.0_02\bin\jusched.exe"
O4 - HKLM\..\Run: [HP Software Update] C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
O4 - HKLM\..\Run: [Acecad.Wtxpload] C:\WINDOWS\Acecad\Wtxpload.exe Acecad
O4 - HKLM\..\Run: [ZPOINT32] C:\WINDOWS\system32\ZPOINT32.exe
O4 - HKLM\..\Run: [ISUSPM Startup] "C:\Program Files\Common Files\InstallShield\UpdateService\isuspm.exe" -startup
O4 - HKLM\..\Run: [ISUSScheduler] "C:\Program Files\Common Files\InstallShield\UpdateService\issch.exe" -start
O4 - HKLM\..\Run: [LogitechCommunicationsManager] "C:\Program Files\Common Files\LogiShrd\LComMgr\Communications_Helper.exe"
O4 - HKLM\..\Run: [LogitechQuickCamRibbon] "C:\Program Files\Logitech\QuickCam\Quickcam.exe" /hide
O4 - HKLM\..\Run: [IMJPMIG8.1] "C:\WINDOWS\IME\imjp8_1\IMJPMIG.EXE" /Spoil /RemAdvDef /Migration32
O4 - HKLM\..\Run: [MSPY2002] C:\WINDOWS\system32\IME\PINTLGNT\ImScInst.exe /SYNC
O4 - HKLM\..\Run: [PHIME2002ASync] C:\WINDOWS\system32\IME\TINTLGNT\TINTSETP.EXE /SYNC
O4 - HKLM\..\Run: [PHIME2002A] C:\WINDOWS\system32\IME\TINTLGNT\TINTSETP.EXE /IMEName
O4 - HKLM\..\Run: [Adobe Reader Speed Launcher] "C:\Program Files\Adobe\Reader 8.0\Reader\Reader_sl.exe"
O4 - HKLM\..\Run: [BM93a13760] Rundll32.exe "C:\WINDOWS\system32\dyqpyjkn.dll",s
O4 - HKLM\..\Run: [AVG8_TRAY] C:\PROGRA~1\AVG\AVG8\avgtray.exe
O4 - HKLM\..\Run: [QuickTime Task] "C:\Program Files\QuickTime\qttask.exe" -atboottime
O4 - HKLM\..\Run: [KernelFaultCheck] %systemroot%\system32\dumprep 0 -k
O4 - HKCU\..\Run: [BgMonitor_{79662E04-7C6C-4d9f-84C7-88D8A56B10AA}] "C:\Program Files\Common Files\Ahead\Lib\NMBgMonitor.exe"
O4 - HKCU\..\Run: [swg] C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
O4 - HKCU\..\Run: [Skype] "C:\Program Files\Skype\Phone\Skype.exe" /nosplash /minimized
O4 - HKCU\..\Run: [DAEMON Tools] "C:\Program Files\DAEMON Tools\daemon.exe" -lang 1033
O4 - HKCU\..\Run: [PlayNC Launcher] C:\program files\games\nclauncher\NCLauncher.exe /Minimized
O4 - HKCU\..\Run: [SpybotSD TeaTimer] C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
O4 - HKCU\..\Run: [ctfmon.exe] C:\WINDOWS\system32\ctfmon.exe
O4 - HKCU\..\RunOnce: [SpybotDeletingB3108] command /c del "C:\WINDOWS\system32\vtsqr.dll_old"
O4 - HKCU\..\RunOnce: [SpybotDeletingD8256] cmd /c del "C:\WINDOWS\system32\vtsqr.dll_old"
O4 - Startup: Stardock ObjectDock.lnk = C:\Program Files\Stardock\ObjectDock\ObjectDock.exe
O4 - Startup: Xfire.lnk = C:\Program Files\Xfire\xfire.exe
O4 - Global Startup: Adobe Gamma Loader.lnk = C:\Program Files\Common Files\Adobe\Calibration\Adobe Gamma Loader.exe
O4 - Global Startup: HP Digital Imaging Monitor.lnk = C:\Program Files\HP\Digital Imaging\bin\hpqtra08.exe
O4 - Global Startup: Outil de mise à jour Google.lnk = C:\Program Files\Google\Google Updater\GoogleUpdater.exe
O8 - Extra context menu item: &D&ownload &with BitComet - res://C:\Documents and Settings\Owner\Desktop\Utilitaires Internet\BitComet\BitComet.exe/AddLink.htm
O8 - Extra context menu item: &D&ownload all video with BitComet - res://C:\Documents and Settings\Owner\Desktop\Utilitaires Internet\BitComet\BitComet.exe/AddVideo.htm
O8 - Extra context menu item: &D&ownload all with BitComet - res://C:\Documents and Settings\Owner\Desktop\Utilitaires Internet\BitComet\BitComet.exe/AddAllLink.htm
O9 - Extra button: BitComet Search - {461CC20B-FB6E-4f16-8FE8-C29359DB100E} - C:\Documents and Settings\Owner\Desktop\Utilitaires Internet\BitComet\tools\BitCometBHO_1.1.8.30.dll (file missing)
O9 - Extra button: Run IMVU - {d9288080-1baa-4bc4-9cf8-a92d743db949} - C:\Documents and Settings\Owner\Start Menu\Programs\IMVU\Run IMVU.lnk
O9 - Extra button: (no name) - {DFB852A3-47F8-48C4-A200-58CAB36FD2A2} - C:\PROGRA~1\SPYBOT~1\SDHelper.dll
O9 - Extra 'Tools' menuitem: Spybot - Search & Destroy Configuration - {DFB852A3-47F8-48C4-A200-58CAB36FD2A2} - C:\PROGRA~1\SPYBOT~1\SDHelper.dll
O9 - Extra button: (no name) - {e2e2dd38-d088-4134-82b7-f2ba38496583} - %windir%\Network Diagnostic\xpnetdiag.exe (file missing)
O9 - Extra 'Tools' menuitem: @xpsp3res.dll,-20001 - {e2e2dd38-d088-4134-82b7-f2ba38496583} - %windir%\Network Diagnostic\xpnetdiag.exe (file missing)
O9 - Extra button: Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
O9 - Extra 'Tools' menuitem: Windows Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
O14 - IERESET.INF: START_PAGE_URL=http://www.ncix.com
O16 - DPF: {17492023-C23A-453E-A040-C7C580BBF700} (Windows Genuine Advantage Validation Tool) - http://download.microsoft.com/download/E/5/6/E5611B10-0D6D-4117-8430-A67417AA88CD/LegitCheckControl.cab
O16 - DPF: {3DCEC959-378A-4922-AD7E-FD5C925D927F} (Disney Online Games ActiveX Control) - https://pirates.disney.com/
O16 - DPF: {6B75345B-AA36-438A-BBE6-4078B4C6984D} (HpProductDetection Class) - http://h20270.www2.hp.com/ediags/gmn2/install/HPProductDetection.cab
O18 - Protocol: linkscanner - {F274614C-63F8-47D5-A4D1-FBDDE494F8D1} - C:\Program Files\AVG\AVG8\avgpp.dll
O18 - Protocol: skype4com - {FFC8B962-9B40-4DFF-9458-1830C7DD7F5D} - C:\PROGRA~1\COMMON~1\Skype\SKYPE4~1.DLL
O20 - AppInit_DLLs: wbsys.dll,avgrsstx.dll
O20 - Winlogon Notify: WB - C:\Program Files\AlienGUIse\fastload.dll
O21 - SSODL: WPDShServiceObj - {AAA288BA-9A4C-45B0-95D7-94D524869DB5} - C:\WINDOWS\system32\WPDShServiceObj.dll
O23 - Service: AVG8 E-mail Scanner (avg8emc) - AVG Technologies CZ, s.r.o. - C:\PROGRA~1\AVG\AVG8\avgemc.exe
O23 - Service: AVG8 WatchDog (avg8wd) - AVG Technologies CZ, s.r.o. - C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
O23 - Service: Google Updater Service (gusvc) - Google - C:\Program Files\Google\Common\Google Updater\GoogleUpdaterService.exe
O23 - Service: LVCOMSer - Logitech Inc. - C:\Program Files\Common Files\LogiShrd\LVCOMSER\LVComSer.exe
O23 - Service: Process Monitor (LVPrcSrv) - Logitech Inc. - C:\Program Files\Common Files\LogiShrd\LVMVFM\LVPrcSrv.exe
O23 - Service: LVSrvLauncher - Logitech Inc. - C:\Program Files\Common Files\LogiShrd\SrvLnch\SrvLnch.exe
O23 - Service: Macromedia Licensing Service - Unknown owner - C:\Program Files\Common Files\Macromedia Shared\Service\Macromedia Licensing.exe
O23 - Service: NBService - Nero AG - C:\Program Files\Nero\Nero 7\Nero BackItUp\NBService.exe
O23 - Service: NVIDIA Display Driver Service (NVSvc) - NVIDIA Corporation - C:\WINDOWS\system32\nvsvc32.exe
O23 - Service: NexTab (Wintab32) - Unknown owner - C:\WINDOWS\system32\Wintab32.exe
O23 - Service: WMP54Gv4SVC - Unknown owner - C:\Program Files\Linksys Wireless-G PCI Wireless Network Monitor\WLService.exe" "WMP54Gv4.exe (file missing)
Et finalement, j'ai fait un scan d'un de mes log minidump avec windbg. Malheureusement, je crois y comprendre que j'ai pas les bons symbols, mais quand je vais voir sur le site pour téléchrager le pack de symbols, ils disent que ça va prendre quelquechose comme 1 gig, mais ma limite de download internet ce mois-ci est déjà pétée donc je peux pas me le permettre.
Par contre, ya p-e un peu d'info utile dans le charabia quand même donc je vous le mets:
Minidump:
Microsoft (R) Windows Debugger Version 6.9.0003.113 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\Minidump\Mini091008-19.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
Debug session time: Wed Sep 10 10:37:54.234 2008 (GMT-4)
System Uptime: 0 days 0:00:34.968
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
.................................................................................................................................
Loading User Symbols
Loading unloaded module list
..............
Unable to load image RT2500.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for RT2500.sys
*** ERROR: Module load completed but symbols could not be loaded for RT2500.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 100000D1, {2f3286e4, 2, 0, b9639cd9}
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Probably caused by : RT2500.sys ( RT2500+16cd9 )
Followup: MachineOwner
---------
J'ai aussi suivi le conseil de quelqu'un sur le post de quelqu'un d'autre et ai mis, dans la configuration de mon dossier My Computer > Properties > Startup and Recovery: sous Writing and Debugging Information, changé le "Small memory dump (64KB)" pour "Complete Memory Dump" et ai décoché l'option "automaticaly restart" quand il y a une System Failure (dsl pour l'anglais). Mais bpn je sais pas si c'est une bonne idée. Et bon même si ça redémarre plus, est-ce que ça ne va plus faire d'erreur? J'en ai aucune idée. :(
Voilà, vraiment désolée pour le message si long, et désolée d'y comprendre si peu. J'espère très fort que quelqu'un pourra m'aider, à ma grande reconnaissance, et en attendant je ferme plus mon ordi...:(
EDIT: Windows Update a embarqué, FLUTEUH. Bon il va essayer de redémarrer au 5 minutes alors je pourrai pas rester toute la nuit à l'en empêcher. J'espère que je vais pas tout perdre... ;_ ;
Répondez-moi quand même svp...
À l'aideuh. ;_;
Alors voilà, hier, j'ai installé un jeu online, S4 league d'alaplaya (http://s4.fr.alaplaya.eu/), j'y jour avec des copains pendant quelques heures, soudain tout le monde se font booter dehors (vive les open beta). Pas très grave; par contre le client du jeu reste ouvert mais il est planté. J'essaie de terminer l'application et autres mais toutes mes tentatives échouent, finalement je redémarre mon ordi car l'application plantée ralentissait tout et puis elle voulait plus partir de mon écran et yada yada.
Et donc, premier mauvais signe, l'ordi redémarre puis dès que Windows commencer à s'ouvrir, pouf! Il redémarre! (on voit aussi brièvement un écran bleu mais c'est trop court) Il fait cela encore quelques fois à ma grande confusion mais il finit par réussir à démérrer correctement. Sauf que paf, des messages d'erreurs dont l'effrayant "Windows has recovered from a serious error" (oui mon XP est en anglais).
J'envoie le rapport d'erreur a Windows, rapport qui en passant a l'air de ceci:
https://app.photobucket.com/
Je crois naïvement que c'est un problème passager causé par mon reboot, donc je vaque à mes occupations et ferme mon ordi le soir. Mais en l'ouvrant aujourd'hui, encore le redémarrage en boucle, mais cette fois il ne semble pas arriver à reprendre le dessus. Je m'inquiète de plus en plus, referme mon ordi plus le ré-ouvre, après 1 ou 2 essais enfin il démarre correctement. Les messages d'erreur me reviennent, et là je panique un peu.
Évidemment je vais me renseigner sur google à propos de ce fameux sysdata.xml et ce fichier .dmp et je fait aussi un scan AVG complet et Spybot S&D. Aucun des deux n'a trouvé quoi que ce soit.
Pendant ce temps je cherche des infos sur mon problème, je lis ceci
http://www.commentcamarche.net/forum/affich 2068392 redemarrage en boucle
cela: http://sysdata.free.fr/?file=Sections&op=article&artid=16
et ceci: http://www.laboratoire-microsoft.org/articles/teched_2002/4/
Mais bon de 1, je crois comprendre que ça peut présager de n'importe quoi, allant de drivers qui marchent mal, de trucs corrompus, d'attaque virale (mais bon AVG/Spybot on rien vu), de hardware qui entre en conflit avec un autre, au manque de tension électrique ou aux ventilateurs bloqués.
Jusqu'à présent mon ordi allait très bien, je n'ai pas installé de nouveau hardware/joué dans mon courant électrique. Je peux voir à l'intérieur de mon ordi par un panneau en plexiglas et bien qu'un tantinet poussièreux, le ventilateur semble tourner. La seule chose; j'ai branché une souris USB et une à port souris en même temps car il y a une dont la roulette semblait ne pas marcher dans le jeu et je voulais tester.
Je viens d'en débrancher une mais bon, je doute que des souris plug-and-play aient causés un crash majeur... >_>
Si c'est un virus, je sais pas. Un ami dit que ça lui ai arrivé sur son iMac avec Windows installé dessus mais il a simplement viré son Windows de sa machine, solution invalide dans mon cas. :(
Et bon de 2, je suis sois franchement grippée, soit franchement allergique, mais bon j'ai les sinus près à exploser, un mal de tête carabiné et du mal à simplement lire, alors comprendre du charabia informatique...
J'ai essayé de suivre les indications dans les liens internet que je vous ai donné (et quelques autres) mais j'avoue que j'y comprends à moitié, j'ai vraiment besoin de l'aide de quelqu'un qui comprend!
J'ai peur de fermer/redémarrer mon ordi, au cas où cette fois il n'ouvrira plus, dans quel cas ça va très mal pour moi. Alors j'ai peur d'aller utiliser le mode sans erreur et ce genre de choses qui nécessite de fermer mon ordi. ;_;
Je vous envoie les Infos sur la config de mon ordi:
Processor: Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz (2 CPUs)
Memory: 2048MB RAM
Hard Drive: 250 GB
Video Card: NVIDIA GeForce 8600 GT
Monitor: Plug and Play Monitor
Sound Card: SoundMAX HD Audio
Keyboard: USB Root Hub
Mouse: USB Root Hub
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227-2254)
J'ai aussi fait un scan Hijackthis:
Log Hijackthis:
Logfile of HijackThis v1.99.1
Scan saved at 10:58:46, on 2008-09-10
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP3 (6.00.2900.5512)
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Wintab32.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\LogiShrd\LVMVFM\LVPrcSrv.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Google\Common\Google Updater\GoogleUpdaterService.exe
C:\Program Files\Common Files\LogiShrd\LVCOMSER\LVComSer.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\AlienGUIse\wbload.exe
C:\Program Files\Linksys Wireless-G PCI Wireless Network Monitor\WLService.exe
C:\Program Files\Linksys Wireless-G PCI Wireless Network Monitor\WMP54Gv4.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\AVG\AVG8\avgemc.exe
C:\Program Files\Common Files\LogiShrd\LVCOMSER\LVComSer.exe
C:\Program Files\Analog Devices\Core\smax4pnp.exe
C:\WINDOWS\system32\RUNDLL32.EXE
C:\Program Files\Java\jre1.6.0_02\bin\jusched.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\WINDOWS\system32\ZPOINT32.exe
C:\Program Files\Common Files\InstallShield\UpdateService\issch.exe
C:\Program Files\Common Files\LogiShrd\LComMgr\Communications_Helper.exe
C:\Program Files\Logitech\QuickCam\Quickcam.exe
C:\PROGRA~1\AVG\AVG8\avgtray.exe
C:\Program Files\Common Files\Ahead\Lib\NMBgMonitor.exe
C:\Program Files\Common Files\Ahead\Lib\NMIndexStoreSvr.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Logishrd\LQCVFX\COCIManager.exe
C:\Program Files\Skype\Phone\Skype.exe
C:\Program Files\DAEMON Tools\daemon.exe
C:\program files\games\nclauncher\NCLauncher.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\HP\Digital Imaging\bin\hpqtra08.exe
C:\Program Files\Google\Google Updater\GoogleUpdater.exe
C:\Program Files\Stardock\ObjectDock\ObjectDock.exe
C:\Program Files\Skype\Plugin Manager\skypePM.exe
C:\Program Files\Xfire\xfire.exe
C:\WINDOWS\system32\mspaint.exe
C:\Program Files\HP\Digital Imaging\bin\hpqSTE08.exe
C:\Program Files\Internet Explorer\IEXPLORE.EXE
C:\WINDOWS\system32\wuauclt.exe
C:\WINDOWS\system32\rundll32.exe
C:\Program Files\WinRAR\WinRAR.exe
C:\Documents and Settings\Owner\Desktop\Hijackthis\HijackThis.exe
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = https://www.google.ca/?gws_rd=ssl
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = https://www.msn.com/fr-fr/?ocid=iehp
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = https://www.bing.com/?toHttps=1&redig=5FC791212101479BAFBE1A679848B1AF
O2 - BHO: Adobe PDF Reader Link Helper - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelper.dll
O2 - BHO: BitComet ClickCapture - {39F7E362-828A-4B5A-BCAF-5B79BFDFEA60} - C:\Documents and Settings\Owner\Desktop\Utilitaires Internet\BitComet\tools\BitCometBHO_1.1.8.30.dll (file missing)
O2 - BHO: Spybot-S&D IE Protection - {53707962-6F74-2D53-2644-206D7942484F} - C:\PROGRA~1\SPYBOT~1\SDHelper.dll
O2 - BHO: SSVHelper Class - {761497BB-D6F0-462C-B6EB-D4DAF1D92D43} - C:\Program Files\Java\jre1.6.0_02\bin\ssv.dll
O2 - BHO: Google Toolbar Helper - {AA58ED58-01DD-4d91-8333-CF10577473F7} - c:\program files\google\googletoolbar1.dll
O2 - BHO: Google Toolbar Notifier BHO - {AF69DE43-7D58-4638-B6FA-CE66B5AD205D} - C:\Program Files\Google\GoogleToolbarNotifier\3.0.1225.9868\swg.dll
O3 - Toolbar: &Google - {2318C2B1-4965-11d4-9B18-009027A5CD4F} - c:\program files\google\googletoolbar1.dll
O4 - HKLM\..\Run: [SoundMAXPnP] C:\Program Files\Analog Devices\Core\smax4pnp.exe
O4 - HKLM\..\Run: [NvCplDaemon] RUNDLL32.EXE C:\WINDOWS\system32\NvCpl.dll,NvStartup
O4 - HKLM\..\Run: [nwiz] nwiz.exe /install
O4 - HKLM\..\Run: [NvMediaCenter] RUNDLL32.EXE C:\WINDOWS\system32\NvMcTray.dll,NvTaskbarInit
O4 - HKLM\..\Run: [Name of App] C:\Program Files\Utilitaires Window\SAMSUNG\FW LiveUpdate\FWManager.exe r
O4 - HKLM\..\Run: [NeroFilterCheck] C:\Program Files\Common Files\Ahead\Lib\NeroCheck.exe
O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files\Java\jre1.6.0_02\bin\jusched.exe"
O4 - HKLM\..\Run: [HP Software Update] C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
O4 - HKLM\..\Run: [Acecad.Wtxpload] C:\WINDOWS\Acecad\Wtxpload.exe Acecad
O4 - HKLM\..\Run: [ZPOINT32] C:\WINDOWS\system32\ZPOINT32.exe
O4 - HKLM\..\Run: [ISUSPM Startup] "C:\Program Files\Common Files\InstallShield\UpdateService\isuspm.exe" -startup
O4 - HKLM\..\Run: [ISUSScheduler] "C:\Program Files\Common Files\InstallShield\UpdateService\issch.exe" -start
O4 - HKLM\..\Run: [LogitechCommunicationsManager] "C:\Program Files\Common Files\LogiShrd\LComMgr\Communications_Helper.exe"
O4 - HKLM\..\Run: [LogitechQuickCamRibbon] "C:\Program Files\Logitech\QuickCam\Quickcam.exe" /hide
O4 - HKLM\..\Run: [IMJPMIG8.1] "C:\WINDOWS\IME\imjp8_1\IMJPMIG.EXE" /Spoil /RemAdvDef /Migration32
O4 - HKLM\..\Run: [MSPY2002] C:\WINDOWS\system32\IME\PINTLGNT\ImScInst.exe /SYNC
O4 - HKLM\..\Run: [PHIME2002ASync] C:\WINDOWS\system32\IME\TINTLGNT\TINTSETP.EXE /SYNC
O4 - HKLM\..\Run: [PHIME2002A] C:\WINDOWS\system32\IME\TINTLGNT\TINTSETP.EXE /IMEName
O4 - HKLM\..\Run: [Adobe Reader Speed Launcher] "C:\Program Files\Adobe\Reader 8.0\Reader\Reader_sl.exe"
O4 - HKLM\..\Run: [BM93a13760] Rundll32.exe "C:\WINDOWS\system32\dyqpyjkn.dll",s
O4 - HKLM\..\Run: [AVG8_TRAY] C:\PROGRA~1\AVG\AVG8\avgtray.exe
O4 - HKLM\..\Run: [QuickTime Task] "C:\Program Files\QuickTime\qttask.exe" -atboottime
O4 - HKLM\..\Run: [KernelFaultCheck] %systemroot%\system32\dumprep 0 -k
O4 - HKCU\..\Run: [BgMonitor_{79662E04-7C6C-4d9f-84C7-88D8A56B10AA}] "C:\Program Files\Common Files\Ahead\Lib\NMBgMonitor.exe"
O4 - HKCU\..\Run: [swg] C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
O4 - HKCU\..\Run: [Skype] "C:\Program Files\Skype\Phone\Skype.exe" /nosplash /minimized
O4 - HKCU\..\Run: [DAEMON Tools] "C:\Program Files\DAEMON Tools\daemon.exe" -lang 1033
O4 - HKCU\..\Run: [PlayNC Launcher] C:\program files\games\nclauncher\NCLauncher.exe /Minimized
O4 - HKCU\..\Run: [SpybotSD TeaTimer] C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
O4 - HKCU\..\Run: [ctfmon.exe] C:\WINDOWS\system32\ctfmon.exe
O4 - HKCU\..\RunOnce: [SpybotDeletingB3108] command /c del "C:\WINDOWS\system32\vtsqr.dll_old"
O4 - HKCU\..\RunOnce: [SpybotDeletingD8256] cmd /c del "C:\WINDOWS\system32\vtsqr.dll_old"
O4 - Startup: Stardock ObjectDock.lnk = C:\Program Files\Stardock\ObjectDock\ObjectDock.exe
O4 - Startup: Xfire.lnk = C:\Program Files\Xfire\xfire.exe
O4 - Global Startup: Adobe Gamma Loader.lnk = C:\Program Files\Common Files\Adobe\Calibration\Adobe Gamma Loader.exe
O4 - Global Startup: HP Digital Imaging Monitor.lnk = C:\Program Files\HP\Digital Imaging\bin\hpqtra08.exe
O4 - Global Startup: Outil de mise à jour Google.lnk = C:\Program Files\Google\Google Updater\GoogleUpdater.exe
O8 - Extra context menu item: &D&ownload &with BitComet - res://C:\Documents and Settings\Owner\Desktop\Utilitaires Internet\BitComet\BitComet.exe/AddLink.htm
O8 - Extra context menu item: &D&ownload all video with BitComet - res://C:\Documents and Settings\Owner\Desktop\Utilitaires Internet\BitComet\BitComet.exe/AddVideo.htm
O8 - Extra context menu item: &D&ownload all with BitComet - res://C:\Documents and Settings\Owner\Desktop\Utilitaires Internet\BitComet\BitComet.exe/AddAllLink.htm
O9 - Extra button: BitComet Search - {461CC20B-FB6E-4f16-8FE8-C29359DB100E} - C:\Documents and Settings\Owner\Desktop\Utilitaires Internet\BitComet\tools\BitCometBHO_1.1.8.30.dll (file missing)
O9 - Extra button: Run IMVU - {d9288080-1baa-4bc4-9cf8-a92d743db949} - C:\Documents and Settings\Owner\Start Menu\Programs\IMVU\Run IMVU.lnk
O9 - Extra button: (no name) - {DFB852A3-47F8-48C4-A200-58CAB36FD2A2} - C:\PROGRA~1\SPYBOT~1\SDHelper.dll
O9 - Extra 'Tools' menuitem: Spybot - Search & Destroy Configuration - {DFB852A3-47F8-48C4-A200-58CAB36FD2A2} - C:\PROGRA~1\SPYBOT~1\SDHelper.dll
O9 - Extra button: (no name) - {e2e2dd38-d088-4134-82b7-f2ba38496583} - %windir%\Network Diagnostic\xpnetdiag.exe (file missing)
O9 - Extra 'Tools' menuitem: @xpsp3res.dll,-20001 - {e2e2dd38-d088-4134-82b7-f2ba38496583} - %windir%\Network Diagnostic\xpnetdiag.exe (file missing)
O9 - Extra button: Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
O9 - Extra 'Tools' menuitem: Windows Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
O14 - IERESET.INF: START_PAGE_URL=http://www.ncix.com
O16 - DPF: {17492023-C23A-453E-A040-C7C580BBF700} (Windows Genuine Advantage Validation Tool) - http://download.microsoft.com/download/E/5/6/E5611B10-0D6D-4117-8430-A67417AA88CD/LegitCheckControl.cab
O16 - DPF: {3DCEC959-378A-4922-AD7E-FD5C925D927F} (Disney Online Games ActiveX Control) - https://pirates.disney.com/
O16 - DPF: {6B75345B-AA36-438A-BBE6-4078B4C6984D} (HpProductDetection Class) - http://h20270.www2.hp.com/ediags/gmn2/install/HPProductDetection.cab
O18 - Protocol: linkscanner - {F274614C-63F8-47D5-A4D1-FBDDE494F8D1} - C:\Program Files\AVG\AVG8\avgpp.dll
O18 - Protocol: skype4com - {FFC8B962-9B40-4DFF-9458-1830C7DD7F5D} - C:\PROGRA~1\COMMON~1\Skype\SKYPE4~1.DLL
O20 - AppInit_DLLs: wbsys.dll,avgrsstx.dll
O20 - Winlogon Notify: WB - C:\Program Files\AlienGUIse\fastload.dll
O21 - SSODL: WPDShServiceObj - {AAA288BA-9A4C-45B0-95D7-94D524869DB5} - C:\WINDOWS\system32\WPDShServiceObj.dll
O23 - Service: AVG8 E-mail Scanner (avg8emc) - AVG Technologies CZ, s.r.o. - C:\PROGRA~1\AVG\AVG8\avgemc.exe
O23 - Service: AVG8 WatchDog (avg8wd) - AVG Technologies CZ, s.r.o. - C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
O23 - Service: Google Updater Service (gusvc) - Google - C:\Program Files\Google\Common\Google Updater\GoogleUpdaterService.exe
O23 - Service: LVCOMSer - Logitech Inc. - C:\Program Files\Common Files\LogiShrd\LVCOMSER\LVComSer.exe
O23 - Service: Process Monitor (LVPrcSrv) - Logitech Inc. - C:\Program Files\Common Files\LogiShrd\LVMVFM\LVPrcSrv.exe
O23 - Service: LVSrvLauncher - Logitech Inc. - C:\Program Files\Common Files\LogiShrd\SrvLnch\SrvLnch.exe
O23 - Service: Macromedia Licensing Service - Unknown owner - C:\Program Files\Common Files\Macromedia Shared\Service\Macromedia Licensing.exe
O23 - Service: NBService - Nero AG - C:\Program Files\Nero\Nero 7\Nero BackItUp\NBService.exe
O23 - Service: NVIDIA Display Driver Service (NVSvc) - NVIDIA Corporation - C:\WINDOWS\system32\nvsvc32.exe
O23 - Service: NexTab (Wintab32) - Unknown owner - C:\WINDOWS\system32\Wintab32.exe
O23 - Service: WMP54Gv4SVC - Unknown owner - C:\Program Files\Linksys Wireless-G PCI Wireless Network Monitor\WLService.exe" "WMP54Gv4.exe (file missing)
Et finalement, j'ai fait un scan d'un de mes log minidump avec windbg. Malheureusement, je crois y comprendre que j'ai pas les bons symbols, mais quand je vais voir sur le site pour téléchrager le pack de symbols, ils disent que ça va prendre quelquechose comme 1 gig, mais ma limite de download internet ce mois-ci est déjà pétée donc je peux pas me le permettre.
Par contre, ya p-e un peu d'info utile dans le charabia quand même donc je vous le mets:
Minidump:
Microsoft (R) Windows Debugger Version 6.9.0003.113 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\Minidump\Mini091008-19.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
Debug session time: Wed Sep 10 10:37:54.234 2008 (GMT-4)
System Uptime: 0 days 0:00:34.968
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
.................................................................................................................................
Loading User Symbols
Loading unloaded module list
..............
Unable to load image RT2500.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for RT2500.sys
*** ERROR: Module load completed but symbols could not be loaded for RT2500.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 100000D1, {2f3286e4, 2, 0, b9639cd9}
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Probably caused by : RT2500.sys ( RT2500+16cd9 )
Followup: MachineOwner
---------
J'ai aussi suivi le conseil de quelqu'un sur le post de quelqu'un d'autre et ai mis, dans la configuration de mon dossier My Computer > Properties > Startup and Recovery: sous Writing and Debugging Information, changé le "Small memory dump (64KB)" pour "Complete Memory Dump" et ai décoché l'option "automaticaly restart" quand il y a une System Failure (dsl pour l'anglais). Mais bpn je sais pas si c'est une bonne idée. Et bon même si ça redémarre plus, est-ce que ça ne va plus faire d'erreur? J'en ai aucune idée. :(
Voilà, vraiment désolée pour le message si long, et désolée d'y comprendre si peu. J'espère très fort que quelqu'un pourra m'aider, à ma grande reconnaissance, et en attendant je ferme plus mon ordi...:(
EDIT: Windows Update a embarqué, FLUTEUH. Bon il va essayer de redémarrer au 5 minutes alors je pourrai pas rester toute la nuit à l'en empêcher. J'espère que je vais pas tout perdre... ;_ ;
Répondez-moi quand même svp...
À l'aideuh. ;_;
A voir également:
- Ordi qui reboote, erreur minidump/ sysdata
- Ordi qui rame - Guide
- Comment reinitialiser un ordi - Guide
- Ordi scrabble - Télécharger - Jeux vidéo
- Ecran ordi a l'envers - Guide
- Mon ordi ne reconnait pas ma clé usb - Guide
3 réponses
yop dejas au demarage de ton pc fait f8 et dans la liste qui apparait selectionne deniiere bonne configugation connus dit mwa si ca change kelle que choses :p
Bondsoir, ou bonjour, c'est selon!...
Ouhlàllà, des lettres d'amour comme ça, y'a ben longtemps qu'ça m'était pont arrivé, mon petit!
Personnellement, je te me balancerai la gross "è&ç_'"èy que tu as téléchargée, soit avec un soft style "eraser", soit en CMD
Juste pour voir
Cela doit venir de mon allergie à ces trucs on-line, qui t'en mettent plein regedit, etc...° pub etc...
Bouarggllnerk...
Sinon, tu as là une belle config, qui "tiens la route" notamment en ram....
Tu devrais dans la foulée accelerer tes perf system (notamment RAM)
Mais c'est autre chose,
je m'égare (non, je ne dirait pas "du nord", n'insistez pas)
Ouhlàllà, des lettres d'amour comme ça, y'a ben longtemps qu'ça m'était pont arrivé, mon petit!
Personnellement, je te me balancerai la gross "è&ç_'"èy que tu as téléchargée, soit avec un soft style "eraser", soit en CMD
Juste pour voir
Cela doit venir de mon allergie à ces trucs on-line, qui t'en mettent plein regedit, etc...° pub etc...
Bouarggllnerk...
Sinon, tu as là une belle config, qui "tiens la route" notamment en ram....
Tu devrais dans la foulée accelerer tes perf system (notamment RAM)
Mais c'est autre chose,
je m'égare (non, je ne dirait pas "du nord", n'insistez pas)
J'ai le même problème mais sans écran bleu, il indique erreur sysdata ... bref,
Cela c'est passé soit quand j'ai installé un jeu ( warcraft 3) mais j'en doute...
Sinon j'avais de la musique à transférer de mon ancien pc ( qui avait le problème sysdata ) pour les mettre sur mon nouveau pc, qui a maintenant l'erreur sysdata. Elle est dans le LOCAL~1 de ma session, donc si je ferme ma session et que je mets quelqu'un d'autre administrateur, cela pourrait permettre de supprimer l'erreur sysdata ?
Merci de votre aide ^^
Cela c'est passé soit quand j'ai installé un jeu ( warcraft 3) mais j'en doute...
Sinon j'avais de la musique à transférer de mon ancien pc ( qui avait le problème sysdata ) pour les mettre sur mon nouveau pc, qui a maintenant l'erreur sysdata. Elle est dans le LOCAL~1 de ma session, donc si je ferme ma session et que je mets quelqu'un d'autre administrateur, cela pourrait permettre de supprimer l'erreur sysdata ?
Merci de votre aide ^^
Merci du conseil mais malheureusement, quand j'appuie sur F8 je n'ai pas acc'es au mode sans erreur et autres configurations de demarrage. J'arrive sur un menu etrange qui me demande de choisir entre 3 "boot devices": mon lecteur disquette (ouin j'en ai un), un truc que je ne reconnait pas mais quand je le selectionne Windows ouvre normalement (puis l'ecran d'erreur bleu apparait), et le dernier semble etre, a vue de nez en lisant le nom, mon lecteur CD. J'ai essaye F5 aussi mais ca ne fait rien. J'ose pas trop jouer dans les autres boutons vu que je sais pas ce que je fais....
J'ai pris en photo l'ecran d'erreur bleu au cas ou les infos qui y figurent pourraient vous indiquer ce qu<est mon probleme. En attendant, je n'arrive plus a ouvrir mon ordi puisque qu'a chaque fois que Windows loade l'ecran bleu apparait...
:(
http://img.photobucket.com/albums/v103/TheSilverstar/IMG_1222.jpg
J'espere qu'on pourra rechapper mon ordinateur... :(
Merci de votre aide, en passant.