Prism

Bonjour,
je voudrai installer prism sur mon wifi nintendo avec ce tuto

1) untar the package using the command:

tar zxvf linux-wlan-ng-X.Y.Z.tar.gz

2) Make sure you have configured kernel and (optionally) pcmcia sources on
your system. Note that if you are _only_ building the prism2_pci,
prism2_plx, or prism2_usb drivers you don't need the pcmcia-cs
source tree.

3) To configure the linux-wlan-ng package, run 'make config'. The
following set of questions will be asked. The default answer is in
braces (e.g. []). Just press <Enter> to select the default answer:

- "Build Prism2.x PCMCIA Card Services (_cs) driver? (y/n) [y]: "
Select "y" if you want to build the Prism PCMCIA driver.
If you select "n", the PCMCIA related questions below
will not be asked.

- Build Prism2 PLX9052 based PCI (_plx) adapter driver? (y/n) [y]:
Select "y" if you want to build the Prism driver for
PLX PCI9052 PCI/PCMCIA adapter based solutions.

- Build Prism2.5 native PCI (_pci) driver? (y/n) [y]:
Select "y" if you want to build the Prism driver for
Prism2.5 ISL3874 based native PCI cards. This includes
PCI add-in cards and the mini-pci modules included in some
notebook computers (but not all, some use internal USB modules).

- Build Prism2.5 USB (_usb) driver? (y/n) [y]:
Select "y" if you want to build the Prism driver for
Prism2.5 ISL3873 based USB adapters. This includes
USB add-on modules and the internal modules included in some
notebook computers.

- Linux source directory /usr/src/linux:
The config script will attempt to automagically find your kernel
source directory. If found, the kernel source source directory
will be presented as the default selection. If the default
selection is wrong, you may correct it here.

- pcmcia-cs source dir /usr/src/pcmcia-cs-3.1.29:
If the "_cs" driver is selected above, the configure script will
attempt to present a reasonable default for the pcmcia source
directory. If the presented directory is incorrect, you may
change it here. If the "_cs" driver is not selected, this
prompt will not appear.

- PCMCIA script directory /etc/pcmcia:
If the "_cs" driver is selected, this prompt allows you to
change the location where the pcmcia scripts will be installed.
Only do this if you have installed the rest of the pcmcia_cs
scripts to a non-default location.

- Alternate target install root directory on host []:
This prompt allows you to specify an alternative root directory
for the install process.

- Module install directory /lib/modules/2.2.20:
Select where you want the driver modules to be installed. The
script constructs a default location using the output of uname.
If you have not yet installed the kernel you will run linux-wlan
with, and the new kernel has a different version string, you will
need to change this value.

- Prefix for build host compiler? (rarely needed) []:
When cross-compiling or using different compilers for kernel and
user-mode software, it is sometimes (but rarely) necessary to
specify a different compiler prefix to use when compiling the
_tools_ that are built to run on the build host during the
linux-wlan-ng build process.

- Build for debugging (see doc/config.debug) (y/n) [y]:
This option enables the inclusion of debug output generating
statements in the driver code. Note that enabling those statements
requires the inclusion of insmod/modprobe command line arguments
when loading the modules. See the document doc/config.debug
for more information.

5) To build the package, run 'make all'

6) To install the package, run 'make install' (as root).

mais quand jarrive a Linux source directory /lib/modules/2.6.24-19-generic/build: je laisse par default donc jappuye sur entré et il me di

get_version.c: Dans la fonction «main» :
get_version.c:5: erreur: «UTS_RELEASE» undeclared (first use in this function)
get_version.c:5: erreur: (Each undeclared identifier is reported only once
get_version.c:5: erreur: for each function it appears in.)
make[1]: *** [get_version] Erreur 1
./Configure: line 246: scripts/make.opts: Aucun fichier ou dossier de ce type

The kernel source tree is version .
Kernel 2.5/2.6 support is highly experimental.
WARNING: the current running kernel is actually version 2.6.24-19-generic.
The current kernel build date is Fri Jul 11 23:41:49 2008.

./Configure: line 337: scripts/make.opts: Aucun fichier ou dossier de ce type

quelquun a une idée car si je fait sa il me fait des erreur pour conpiler et installer