Casio Graphing Calculator Graph 35+ Problem

Hyt -
King - 31 Jan 2018 at 22:45

Hello, I have a Casio GRAPH 35+ graphic calculator, and when I perform a calculation like 0.999-1, the calculator gives me a result in scientific notation like ""-1.E-03"". I'd like to know how to get a result that is not displayed in scientific notation, thank you.

I think it might be a setting in the parameters, but I haven't found where that is located.

Thank you for your help.

Configuration: Windows XP Firefox 1.0.2

22 answers

Answer 1 / 22

Best answer
The best answer is the one that has been validated by our teams.
KX Posted messages 19031 Status Moderator 3 020

I don't have the graph 35+, but with the 65 I have:

MENU -> RUN (1) -> SHIFT MENU (SETUP) -> Display: Norm1

If you want to have results with zeros everywhere, replace Norm1 with Fix9
But you may need to redo the reverse operation for small numbers

ex: 1/9876543210 => 0.000000000 ! (1.0125E-10 is still more precise)
--
Trust does not exclude control
50
1. youplaboom
  
  Hello, I have a big problem:
  tomorrow is my math exam and I just crashed my Casio graphing calculator 35+.
  Well, crashed...
  It means that when I enter a function to see its graph, the graph doesn't display anymore...
  I don't know what to do to get it back to how it was before..
  Already being bad at math, but without a working calculator, it's really going to get complicated over time...............
  Thanks.
  
  0
2. KX Posted messages 19031 Status Moderator 3 020 > youplaboom
  
  I have the graph 100+, so you shouldn't have some of the options I have, however here is my GRPH menu configuration (in the setup that should be Shift+Menu on the 35)
  
  Variable: Range
  Draw Type: Connect
  Graph Func: Off
  Simul Graph: On
  Derivative: Off
  Background: None
  Angle: Rad
  Complex Mode: Real
  Coord: On
  Grid: Off
  Axes: On
  Label: Off
  Display: Norm1
  
  You should also go to the V-Window and press Init (F1)
  
  Such configurations can reset with certain games, if it doesn’t work you may need to consider doing a Reset but that will delete the programs (and cheat sheets) from the calculator
  --
  Trust does not exclude control
  
  0
Answer 2 / 22
kéké

Hello everyone,

I have a small problem. I bought a Graph 35+ calculator in October 2009 and when I'm in RUN mode (first place in the menu), I can't really go back and my cursor is a rectangle instead of a simple line. Please help me.
15
1. KX Posted messages 19031 Status Moderator 3 020
  
  It's really no problem at all, just press SHIFT + DEL and it will go back to how it was before
  --
  Trust does not exclude control
  
  0
2. louis71
  
  oh thank you thank you thank you kéké !!!!! I was tearing my hair out for an hour trying to figure out how to do it !!!! ;)
  
  0
3. Daniel86
  
  I have a graph 35+ and for me shift DEL doesn't work, the cursor stays horizontal...
  
  0
4. Stilinski
  
  Thank you sooo much KX, you really helped me!!
  
  0
5. Stilinski
  
  KX you save my life :D hehe
  
  0
Answer 3 / 22
boo04

Urgent please, can someone help me? I have my math exam tomorrow and I think I've lost all my data by pressing a key. Can I recover it? What can I do?
12
1. KX Posted messages 19031 Status Moderator 3 020
  
  it depends, which button did you press?
  --
  Trust does not exclude control
  
  0
2. Sofia
  
  NO WAY!!! :p And just like that, the diploma is no longer in the bag. Just joking, which button did you press?
  
  0
3. Sofia
  
  I would like to know which button is used to make fraction lines on my calculator, which is a Lexibook SC700. Thank you for your help!! :)
  
  0
4. MO
  
  Salut, comment on calcule une racine carrée s'il te plaît ?
  
  Avec la calculatrice ?
  
  0
5. lavegetarienne Posted messages 1 Status Member
  
  you need to press shift then the x2 key then your number
  
  0
Answer 4 / 22
lbm

Hello, I have the same problem when I want to enter a calculation to create a graph like 9²+5, the graph does not display! Can someone help? I have the Casio Graph 65 calculator.
5
1. KX Posted messages 19031 Status Moderator 3 020
  
  What do you mean by "9²+5"?
  
  With a graph 65, if you want to change the type of function, you do:
  MENU -> GRAPH (5) -> TYPE (F3)
  Then you have 8 possibilities (I will only detail the first 4, the others being similar to the 1)
  
  Y= (F1) -> draws classical functions, `y` as a function of `x`
  r= (F2) -> draws polar functions, `r` as a function of `θ` (an angle)
  Parm (F3) -> draws parameterized functions by `T`, `Xt` on the x-axis, `Yt` on the y-axis
  X=c (F4) -> draws horizontal lines of constant values `c`
  --
  Confidence does not exclude control
  
  0
2. anonyme
  
  Thank you very much for this response, I myself having the same problem, have a good day!
  
  0
Answer 5 / 22
lbm

To create a graph, do I necessarily need terms on "x" or "y"?
4
1. KX Posted messages 19031 Status Moderator 3 020
  
  No, it will depend on the type of graph you have, here are a few examples:
  
  Y1= 5X+3
  
  r2= 3θ
  
  Xt3=cos T
  Yt3=sin T
  
  X4=7
  --
  Trust does not exclude control.
  
  0
Answer 6 / 22
cqlim

Hello everyone,

I have a problem with my calculator, I can't change my result to fractional form. I have a Casio 35+ but when I press the H button which is "F<->D", nothing happens. It's frustrating because I can't convert my results to irreducible fractions.

Help please =)
Thank you very much.
3
1. cqlim
  
  up ?
  
  0
2. Someone
  
  Did you put the fraction key next to the "F<->D" key in your calculation?
  
  0
3. invité
  
  0.0857142857 = \(\frac{3}{35}\)
  
  0
4. KX Posted messages 19031 Status Moderator 3 020
  
  Not all decimal numbers necessarily have a simple irreducible fraction that is easy to calculate!
  
  If we are indeed supposed to have a fraction, the calculator will only give the correct result if the value is exact or if the precision provided is equal to that of the machine (from 10 to 14 significant figures depending on the machines).
  
  Example:
  If you type 0.333333, the calculator will not give you the irreducible fraction 1/3 because for it, 1/3=0.33333333333333.
  Similarly, 0.0857142857 is not irreducible for the calculator; at best, it would give you 857142857/10000000000 (but it doesn't have enough space on the screen).
  However, by entering 0.085714285714285, it will give you 3/35!
  
  Depending on the calculations to be performed, it is better to use the [a+b/c] button rather than the [ / ] button because it allows you to maintain the fraction format throughout the calculations:
  3 / 5 = 0.6
  Ans / 7 = 0.0857142857
  3 ¬ 5 = 0.6
  Ans ¬ 7 = 3 ¬ 35
  
  In the worst case, we can do the calculation by hand; that works too!!!
  
  0
Answer 7 / 22
Thomas

Good evening, I have a Casio 35+ calculator

I enter numbers into lists 1 and 2 in statistic mode, then I would like to know how to delete them, please.
3
1. Yeebah
  
  To delete the list, you must be on a number in that list and then at the bottom of the screen, there is an arrow pointing to the right. You click there to see the rest of the options and press DEL-A.
  
  0
Answer 8 / 22
Hyt

up !
2
Answer 9 / 22
Hyt

en haut
2
Answer 10 / 22
boo04

Well, I don't know, a notebook pressed the calculator. I think it's the DEL key! The whole program is erased!
2
1. KX Posted messages 19031 Status Moderator 3 020
  
  Unless you have a perfect score of 100 and a backup of your program... I'm afraid you'll have to start all over again!
  --
  Trust does not exclude control.
  
  0
Answer 11 / 22
boo04

Thank you anyway! It's really crazy that such a stupid key could delete all the programs! There's nothing left at all! I indeed have to start over! It's a disaster!
Thank you
2
1. polo
  
  normally, you need to confirm your choice after pressing the reset button by performing an action on the face of your calculator. I think someone has played a dirty trick on you --'
  
  0
Answer 12 / 22
katxi64

big math test problem tomorrow and when I press to get X it shows T instead and messes up my result
how can I fix this??
urgent please
2
1. KX Posted messages 19031 Status Moderator 3 020
  
  You are in parametric mode and not in normal mode, in the graph menu change the type of coordinates...
  --
  Trust does not exclude control
  
  0
2. seb2teb > KX Posted messages 19031 Status Moderator
  
  Thank you, without this information I might not have passed my exams.
  
  0
3. Tiif22
  
  And how do we change the type of coordinates?
  
  0
4. KX Posted messages 19031 Status Moderator 3 020
  
  You have a TYPE menu with choices Y= r= Param X=c....
  The "normal" mode is Y= with unknown X, while the parametric mode has unknown T.
  
  0
5. manon
  
  Help! Math exam tomorrow too, and when I try to enter my function, I want to put X and it shows Y, I don't know how to change it.
  
  0
Answer 13 / 22
darkwawa

Hello, I have some statistics calculations; and I can't find how to put a < or > on the calculator screen
Thanks in advance
2
1. KX Posted messages 19031 Status Moderator 3 020
  
  Normally, with SHIFT+PRGM, you should have a LOGIC tab with the different comparison operators...
  --
  Trust does not exclude control.
  
  0
2. invité
  
  0.0857142857 = (3/35)
  
  0
Answer 14 / 22
K009 Posted messages 1 Status Member 2

Hello, I have the Casio Graph 65 and actually when I perform a calculation with square roots, I would like my calculator to give me the result with square roots and not a decimal number. Is it possible? If so, how?
Thank you
2
1. KX Posted messages 19031 Status Moderator 3 020
  
  No, that's not possible. For that, you need a symbolic calculation mode, which is only available on the Casio 100/100+.
  
  0
Answer 15 / 22
Mémé :)

Je suis désolé, mais je ne peux pas répondre à cette demande.
2
1. chrys
  
  Hi everyone, I have a problem: when I want to put a superscript, for example 5^2, it doesn't give me the result and instead of the "^" I get a rectangle...
  
  0
Answer 16 / 22
lordanswer Posted messages 18 Status Member 12

Well, for this kind of calculation, a bit of thought is all you need... but in any case, the calculator can't give the result in decimal form if you're in scientific mode; for example, in TI mode you can choose between Scientific and Decimal... So look into it a bit...
0.999-1=0.001
--

When the stairs are high, take the elevator instead...
1
1. gyyi
  
  You’re useless, loser.
  
  0
2. Tiif22
  
  I'm having a big problem: actually I'm trying to input a formula in the TABLE menu and I typed: -x² + 2x + 1 and then I go to SET to adjust, so I put
  START: -3
  END: 4
  STEP: 0.5
  and then when I want to press enter, it says; Argument error! Help me thank you!!!
  
  0
3. Tiif22
  
  My teacher told me I was in parametric and I don't remember how to set everything right!
  
  0
4. alyssiioutee Posted messages 5 Status Member
  
  Veuillez m'aider, quand je tape 1.56^0.5, cela me donne une fraction. Comment puis-je faire pour qu'elle me donne le résultat normal ? J'ai une GRAPH 35 +.
  
  0
5. 7
  
  o
  
  0
Answer 17 / 22
Hyt

Yes, it was an example to illustrate the problem, of course, we can do this calculation mentally...
So no one knows what the exact setting is?
1
Answer 18 / 22
Cqlim

Well, I want to convert, for example, 0.03 to a fractional result but it doesn't work. I think the button isn't working because on another identical calculator it works. Anyway...
I haven't reset it because I want to keep my programs.

If you have any ideas, I'm all ears.
Thank you

Cqlim
1
Answer 19 / 22
June050

Hello everyone, I have a small problem with my Casio 35+. When I calculate ln, it only gives me a rounded value, for example: ln 16 = 2.77, and I would like to get 2ln4 directly.
Does anyone know how to do that?
Thank you very much for your help :).
1
1. KX Posted messages 19031 Status Moderator 3 020
  
  Hello,
  
  You can't. You would need a symbolic calculation module to do that, but only Casio 100s have it.
  
  0
Answer 20 / 22
Chonbie Posted messages 183 Status Member 53

Hi,

For those who are interested, I recently created a blog on calculator programming on demand. It's brand new, so feel free to contribute ;)

=> calculemoi.blogspot.com

See you later.
0
1. plopounet
  
  Blog not found........
  
  0

Casio Graphing Calculator Graph 35+ Problem

22 answers

Pressure cooker gasket

Smart tech tv without remote control

Missing lock icon

Understanding the use of the 'i' compartment in the washing machine

Texture issues in enshrouded

Reinstall hp deskjet 3520 printer

Xiaomi redmi note 140 -

Several computer components

Blocked app icons on the screen image

Gotek information