1 réponse
Bonsoir gisèle:
Es-tu sous xp.As-tu fais récemment une mise-à jour,si oui ton blème ressemble à cette description:
When you start your computer after you upgrade to Windows XP, you may receive one or both of the following error messages:
o Invalid Boot.ini
o Windows could not start because the following file is missing or corrupt:
+ Windows\System32\Hal.dll
* Cause
This issue may occur if the Boot.ini file is missing, damaged, or contains incorrect entries.
* Resolution
To resolve this issue, start the computer from the Windows XP CD, start the Recovery Console, and then use the Bootcfg.exe tool to rebuild the Boot.ini file:
o Configure the computer to start from the CD-ROM or DVD-ROM drive. For information about how to do this, see your computer documentation or contact your computer manufacturer.
o Insert the Windows XP CD-ROM into your CD-ROM or DVD-ROM drive, and then restart your computer.
o When you see the "Press any key to boot from CD" message, press a key to start your computer from the Windows XP CD-ROM.
o When you see the "Welcome to Setup" message, press R to start the Recovery Console.
o If you have a dual-boot or multiple-boot computer, select the installation that you have to use from the Recovery Console.
o When you are prompted to do so, type the administrator password, and then press ENTER.
o At the command prompt, type bootcfg /list, and then press ENTER. The entries in your current Boot.ini file are displayed on the screen.
o At the command prompt, type bootcfg /rebuild, and then press ENTER. This command scans the hard disks of the computer for Windows XP, Microsoft Windows 2000, or Microsoft Windows NT installations, and then displays the results. Follow the on-screen instructions to add the Windows installations to the Boot.ini file. The following is an example of how to add a Windows XP installation to the Boot.ini file:
+ You receive a message that is similar to the following:
# Total Identified Windows Installs: 1
# [1] C:\Windows
Add installation to boot list? (Yes/No/All)
# When you receive the message in step a, press Y.
# You receive a message that is similar to the following:
* Enter Load Identifier
This is the name of the operating system.
# When you receive the message in step c, type the name of your operating system, and then press ENTER. This is either Microsoft Windows XP Professional or Microsoft Windows XP Home Edition.
# You receive a message that is similar to the following:
* Enter OS Load options
* The instructions that are displayed on your screen may be different depending on the configuration of your computer.
# When you receive the message in step e, type /fastdetect and then press ENTER.
+ Type exit, and then press ENTER to quit Recovery Console. Your computer restarts and the updated boot list is displayed when you receive the "Please select the operating system to start" message.
C'est en anglais (rien trouvé en français ) il faut reconstruire :Boot.ini avec :Bootcfg.exe, à partir de ton Windows XP CD.
J'espère que celà va t'aider .
La description vient de:
http://www.rselby.com/xp_error_messages.htm
C'est le 3° (en rouge):"Invalid Boot.ini" or "Windows Could Not Start" Error Messages When You Start Your Computer
A+
laumi
Es-tu sous xp.As-tu fais récemment une mise-à jour,si oui ton blème ressemble à cette description:
When you start your computer after you upgrade to Windows XP, you may receive one or both of the following error messages:
o Invalid Boot.ini
o Windows could not start because the following file is missing or corrupt:
+ Windows\System32\Hal.dll
* Cause
This issue may occur if the Boot.ini file is missing, damaged, or contains incorrect entries.
* Resolution
To resolve this issue, start the computer from the Windows XP CD, start the Recovery Console, and then use the Bootcfg.exe tool to rebuild the Boot.ini file:
o Configure the computer to start from the CD-ROM or DVD-ROM drive. For information about how to do this, see your computer documentation or contact your computer manufacturer.
o Insert the Windows XP CD-ROM into your CD-ROM or DVD-ROM drive, and then restart your computer.
o When you see the "Press any key to boot from CD" message, press a key to start your computer from the Windows XP CD-ROM.
o When you see the "Welcome to Setup" message, press R to start the Recovery Console.
o If you have a dual-boot or multiple-boot computer, select the installation that you have to use from the Recovery Console.
o When you are prompted to do so, type the administrator password, and then press ENTER.
o At the command prompt, type bootcfg /list, and then press ENTER. The entries in your current Boot.ini file are displayed on the screen.
o At the command prompt, type bootcfg /rebuild, and then press ENTER. This command scans the hard disks of the computer for Windows XP, Microsoft Windows 2000, or Microsoft Windows NT installations, and then displays the results. Follow the on-screen instructions to add the Windows installations to the Boot.ini file. The following is an example of how to add a Windows XP installation to the Boot.ini file:
+ You receive a message that is similar to the following:
# Total Identified Windows Installs: 1
# [1] C:\Windows
Add installation to boot list? (Yes/No/All)
# When you receive the message in step a, press Y.
# You receive a message that is similar to the following:
* Enter Load Identifier
This is the name of the operating system.
# When you receive the message in step c, type the name of your operating system, and then press ENTER. This is either Microsoft Windows XP Professional or Microsoft Windows XP Home Edition.
# You receive a message that is similar to the following:
* Enter OS Load options
* The instructions that are displayed on your screen may be different depending on the configuration of your computer.
# When you receive the message in step e, type /fastdetect and then press ENTER.
+ Type exit, and then press ENTER to quit Recovery Console. Your computer restarts and the updated boot list is displayed when you receive the "Please select the operating system to start" message.
C'est en anglais (rien trouvé en français ) il faut reconstruire :Boot.ini avec :Bootcfg.exe, à partir de ton Windows XP CD.
J'espère que celà va t'aider .
La description vient de:
http://www.rselby.com/xp_error_messages.htm
C'est le 3° (en rouge):"Invalid Boot.ini" or "Windows Could Not Start" Error Messages When You Start Your Computer
A+
laumi
