Demande d'infos pour test
dezailles
-
asevere Messages postés 13095 Date d'inscription Statut Webmaster Dernière intervention -
asevere Messages postés 13095 Date d'inscription Statut Webmaster Dernière intervention -
Bonjour
J'aimerais un peu d'aide pour ce test QCM concernant LINUX préalable à un entretien d'embauche.
D'avance merci.
Linux
46. Which of the following commands can you use to check the IP address configuration of the NIC under Linux?
a) ipconfig /all
b) ifconfig -a
c) winipcfg
d) ipcfg -a
e) showip /all
47. RedHat Linux comes with a few standard, free, applications that may be used to make backups. Two of these are:
a) Tar
b) sbackup
c) dump
d) arcserve
e) streamer
48. What is the function of the cron daemon in Linux and other Unixes?
a) It purges virtual memory and temporary files.
b) It automatically mounts CDs, floppies and other removable storage devices.
c) It automatically adds a CR (carriage return) to every linefeed character.
d) It executes commands at scheduled specific dates and times.
49. You have a server with a single DLT drive, running RedHat Linux. Which of the following is the proper device name for the DLT?
a) /dev/dlt
b) /dev/st0
c) /dev/taper
d) /dev/streamer
50. Where would you find error messages from the network driver on your Linux server?
a) /var/log/messages
b) /root/syslog
c) /syslog
d) Depending on the manufacturer of the network card: /adm/log/"manufacturer"
51. 1Which command would you use to list the drivers loaded into your server running Red Hat 7.3?
a) insmod
b) lsmod
c) rmmod
d) lsdrv
e) insdrv
52. In Red Hat 7.x, what command should type to start the SNMP service?
a) snmp start
b) snmpd start
c) insmod snmp
d) Run snmp
53. A customer has installed Linux RedHat 6.x on his server and now at boot time he cannot access the System Partition anymore. Using Fdisk he can see that the System Partition is still on the server. What can he do to get access again to the System Partition?
a) Boot with a DOS boot disk and run the command Fdisk/mbr.
b) Edit /etc/lilo.conf and add a new line for the diag partition; then run /sbin/lilo.
c) With linux installed you cannot use the system partition anymore.
d) Boot with a DOS boot disk; run Fdisk and make the system partition “active”.
54. How can you discover the version of the kernel which is running on a particular Linux server?
a) On the command line type: "uname -v"
b) On the command line type: "lskernel -l"
c) On the command line type: "uname -r"
d) On the command line type: "lskernel -v"
55. Client has an enterprise 8-way server with 512 MB of memory running RedHat Linux 7.3. He upgrades to 8 GB of memory, but finds that his OS is only using 4 GB. What is the solution?
a) There is no solution. Linux can only use 4 GB of RAM.
b) Client needs to enable “large memory access” in the Advanced Mode of the SCU (BIOS).
c) Client needs to install the “enterprise” kernel using the RedHat rpm.
d) Client needs to add the following line to his lilo.conf: “append: largemem”.
J'aimerais un peu d'aide pour ce test QCM concernant LINUX préalable à un entretien d'embauche.
D'avance merci.
Linux
46. Which of the following commands can you use to check the IP address configuration of the NIC under Linux?
a) ipconfig /all
b) ifconfig -a
c) winipcfg
d) ipcfg -a
e) showip /all
47. RedHat Linux comes with a few standard, free, applications that may be used to make backups. Two of these are:
a) Tar
b) sbackup
c) dump
d) arcserve
e) streamer
48. What is the function of the cron daemon in Linux and other Unixes?
a) It purges virtual memory and temporary files.
b) It automatically mounts CDs, floppies and other removable storage devices.
c) It automatically adds a CR (carriage return) to every linefeed character.
d) It executes commands at scheduled specific dates and times.
49. You have a server with a single DLT drive, running RedHat Linux. Which of the following is the proper device name for the DLT?
a) /dev/dlt
b) /dev/st0
c) /dev/taper
d) /dev/streamer
50. Where would you find error messages from the network driver on your Linux server?
a) /var/log/messages
b) /root/syslog
c) /syslog
d) Depending on the manufacturer of the network card: /adm/log/"manufacturer"
51. 1Which command would you use to list the drivers loaded into your server running Red Hat 7.3?
a) insmod
b) lsmod
c) rmmod
d) lsdrv
e) insdrv
52. In Red Hat 7.x, what command should type to start the SNMP service?
a) snmp start
b) snmpd start
c) insmod snmp
d) Run snmp
53. A customer has installed Linux RedHat 6.x on his server and now at boot time he cannot access the System Partition anymore. Using Fdisk he can see that the System Partition is still on the server. What can he do to get access again to the System Partition?
a) Boot with a DOS boot disk and run the command Fdisk/mbr.
b) Edit /etc/lilo.conf and add a new line for the diag partition; then run /sbin/lilo.
c) With linux installed you cannot use the system partition anymore.
d) Boot with a DOS boot disk; run Fdisk and make the system partition “active”.
54. How can you discover the version of the kernel which is running on a particular Linux server?
a) On the command line type: "uname -v"
b) On the command line type: "lskernel -l"
c) On the command line type: "uname -r"
d) On the command line type: "lskernel -v"
55. Client has an enterprise 8-way server with 512 MB of memory running RedHat Linux 7.3. He upgrades to 8 GB of memory, but finds that his OS is only using 4 GB. What is the solution?
a) There is no solution. Linux can only use 4 GB of RAM.
b) Client needs to enable “large memory access” in the Advanced Mode of the SCU (BIOS).
c) Client needs to install the “enterprise” kernel using the RedHat rpm.
d) Client needs to add the following line to his lilo.conf: “append: largemem”.
A voir également:
- Demande d'infos pour test
- Test performance pc - Guide
- Steam deck oled test - Guide
- Test disque dur - Télécharger - Informations & Diagnostic
- Test composant pc - Guide
- Redmi note 14 4g test - Accueil - Téléphones
1 réponse
hehe,
ça ressemble à de la certification RH tout ça,
Tu peux évidement trouver les réponses sur le net, ou même juste en utilisant RH, il n'y a vraiment rien de compliqué dans ces questions.
Cependant, je rechigne un peu a te les donner, car selon moi, il vaut mieux bien comprendre le systeme. Si tu peux répondre à ces questions, parce qu'on t'as soufflé les réponses, il n'est pas dit que tu puisse y répondre si un mot est changé dans l'ennoncé.
Pour ça tu as des bouquins, je te conseil "LPI Linux Certication in a nutshell" aux edition O'Reilly. Ce bouquin couvre tout ce qui est aborder dans les certification LPI niveau 1 (101-102)
C'est à mon avis le minimum à maitriser. Bien que ce soit LPI et pas RH, (il existe surment de bouquin pour RH, se renseigner sur le site)
Le principe est exactement le même à ceci pret que tout est abordé de manière plus général...
Tu ne trouvera pas d'information sur le redhat center, mais sur tout les commandes GNU, UNIX, et tout les services qui sont communs à toute les distribes de linux.
(cf: www.lpi.org )
voili voilou! avoir ces certif est un plus, mais le principal c'est quand même de maitriser le contenus de ces certifs, pas de les avoir :)
@++
ça ressemble à de la certification RH tout ça,
Tu peux évidement trouver les réponses sur le net, ou même juste en utilisant RH, il n'y a vraiment rien de compliqué dans ces questions.
Cependant, je rechigne un peu a te les donner, car selon moi, il vaut mieux bien comprendre le systeme. Si tu peux répondre à ces questions, parce qu'on t'as soufflé les réponses, il n'est pas dit que tu puisse y répondre si un mot est changé dans l'ennoncé.
Pour ça tu as des bouquins, je te conseil "LPI Linux Certication in a nutshell" aux edition O'Reilly. Ce bouquin couvre tout ce qui est aborder dans les certification LPI niveau 1 (101-102)
C'est à mon avis le minimum à maitriser. Bien que ce soit LPI et pas RH, (il existe surment de bouquin pour RH, se renseigner sur le site)
Le principe est exactement le même à ceci pret que tout est abordé de manière plus général...
Tu ne trouvera pas d'information sur le redhat center, mais sur tout les commandes GNU, UNIX, et tout les services qui sont communs à toute les distribes de linux.
(cf: www.lpi.org )
voili voilou! avoir ces certif est un plus, mais le principal c'est quand même de maitriser le contenus de ces certifs, pas de les avoir :)
@++
"Si c'est stupide et que ça marche, alors ce n'est pas stupide"