View original (French)

Tv technique

FRANCOIS -  
nadellen Posted messages 11941 Registration date   Status Member Last intervention   -
Hello,
I just did an auto search to select the TV channels and 40 channels were found, but when I turn off the TV, I do not find the channels again; I find the first list that was made several years ago which was not satisfactory since I only had 20. Since then, I've added a TV amplifier. Can you please advise me?

Configuration: Windows / Chrome 79.0.3945.79

3 answers

  1.
    Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 201
     
    Hello,

    Do a "reset" or "factory reset" or "initial configuration" (see menu) but you will have to redo the entire installation and settings.

    --
    I call a spade a spade *
    *in French in the text
    1
    1. FRANCOIS
       
      Good evening. Thank you for the tip. I tried, but I don't see how to do a reset. The brand of the television is Technical. It's a secondary set with great color and picture; it works quite well except for this detail. I will keep looking for a solution. Thank you again, and don't hesitate to let me know if you find a solution.
      1
  2. nadellen Posted messages 11941 Registration date   Status Member Last intervention   7 352
     
    Hello
    another lead:
    Are you properly exiting the search procedure to memorize the channels?
    (for example, by confirming with OK before exiting.)
    It could be a defective non-volatile memory (or a backup battery if there is one), but that's unlikely.
    What model/brand is this TV? How old is it?
    0
    1. FRANCOIS
       
      Good evening, thank you for the information. I have validated with Ok, I have tried several times without success. I am still looking for a solution.
      The TV is a Technical brand, the picture is beautiful and the colors are great. I installed it 5 years ago. It has kept in memory the "old" channels. There were few of them. I just installed an amplifier and I am picking up more channels with impeccable quality except for this memory issue. Perhaps the screen is defective?? Do not hesitate if you have a solution.
      0
  3. nadellen Posted messages 11941 Registration date   Status Member Last intervention   7 352
     
    re
    try updating the firmware and see if that fixes the issue!
    0