A voir également:
- APN de mon androïd
- Android recovery - Guide
- Historique presse-papier android - Guide
- Voir mot de passe wifi android - Guide
- À quoi sert google drive sur android - Guide
- Begone android - Accueil - Protection
Voilà ce que me demande le constructeur :
5. Operation Commands Guide
5.1 Set APN: (VERY IMPORTANT AND MUST BE DONE 1ST) For the device to send data to the server, this command
MUST be enabled.
SMS: *apn*AXXX*BXXX*CXXX* This command sets the telecom Access Point Name. BXXX refers to user name, CXXX
refers to password.
If there is no user name and password required, send as *apn*AXXX*
If there is user name but no password required, send as *apn*AXXX* BXXX*
APN information can be checked on local telecom website.
You will receive the following text: "Notice: APN is set to XXX. User name: XX. Password: XX”
5.2 Registering the “Master” Controller
SMS to the device: *master*123456*+1XXXXXXXXXXXX*, (For instance, master controller phone number is
+1XXXXXXXXXXXX. +1 refers to the country code. XXXXXXXXXXXX is the cellphone number. Please make sure country
code is included, and digit 0 is not needed before cell phone number)
Device Response: "Notice: Cell Phone # xxxxxxxxxx is set to master controller, the password is 123456.” (The device
has a default password of “123456” to initially program in your PDA/Phone.
NOTE: The device will ONLY listen and respond to instructions from this number unless you choose to turn on the
multi controller function and open the device to any cell phone number
A partir de là je nage car l'anglais n'est pas mon fort
Merci encore
par curiosité donnes le modèle précis de ton mobile et quel est donc ce fameux gps dont tu nous parles.
appareil à connecter Q805
Voilà ce que me demande le constructeur :
5. Operation Commands Guide
5.1 Set APN: (VERY IMPORTANT AND MUST BE DONE 1ST) For the device to send data to the server, this command
MUST be enabled.
SMS: *apn*AXXX*BXXX*CXXX* This command sets the telecom Access Point Name. BXXX refers to user name, CXXX
refers to password.
If there is no user name and password required, send as *apn*AXXX*
If there is user name but no password required, send as *apn*AXXX* BXXX*
APN information can be checked on local telecom website.
You will receive the following text: "Notice: APN is set to XXX. User name: XX. Password: XX”
5.2 Registering the “Master” Controller
SMS to the device: *master*123456*+1XXXXXXXXXXXX*, (For instance, master controller phone number is
+1XXXXXXXXXXXX. +1 refers to the country code. XXXXXXXXXXXX is the cellphone number. Please make sure country
code is included, and digit 0 is not needed before cell phone number)
Device Response: "Notice: Cell Phone # xxxxxxxxxx is set to master controller, the password is 123456.” (The device
has a default password of “123456” to initially program in your PDA/Phone.
NOTE: The device will ONLY listen and respond to instructions from this number unless you choose to turn on the
multi controller function and open the device to any cell phone number
A partir de là je nage car l'anglais n'est pas mon fort
Merci encore
GPS Q805 inconnu...mais qu'est ce donc? as tu le lien à nous donné que l'on voit de quoi il s'agit.ainsi que le site du fabricant ou fournisseur
Ne suis pas sur du tout qu'il s'agisse d'un GPS? vu que tu en as un au moins sur ton phone.ceci etant les APN sont ceux de ton operateur par exemple orange ou sfr etc..
et c'est là qu 'apparait l'APN :
5. Operation Commands Guide
5.1 Set APN: (VERY IMPORTANT AND MUST BE DONE 1ST) For the device to send data to the server, this command
MUST be enabled.
SMS: *apn*AXXX*BXXX*CXXX* This command sets the telecom Access Point Name. BXXX refers to user name, CXXX