Jumbo universal remote code for Thomson TV
Emeliyne
Posted messages
2
Status
Membre
-
Froulik Posted messages 4292 Status Membre -
Froulik Posted messages 4292 Status Membre -
Hello,
I bought a universal remote about 6 months ago. It's a Jumbo universal remote, but since I'm forgetful, I accidentally threw away the booklet with all the codes, including the one for my Thomson TV...
If by any chance someone could help me, I would be grateful...
Thanks in advance =D
I bought a universal remote about 6 months ago. It's a Jumbo universal remote, but since I'm forgetful, I accidentally threw away the booklet with all the codes, including the one for my Thomson TV...
If by any chance someone could help me, I would be grateful...
Thanks in advance =D
3 réponses
SETTING BY CODE SEARCH
This is an alternative method to program your device without using the code list. The remote control will scan the code list to find the one that corresponds to your device.
1- Turn on the device you want to program.
2- Point the remote control at the device and press the CODE SEARCH button for at least 3 seconds until the red LED lights up continuously.
3- Press the button for the type of device (TV, DVD, VCR, ...). The LED will blink once, then stay on.
4- Slowly and repeatedly press the ON/OFF button on your remote control until the device you are trying to program turns off. Note that the LED will blink once each time you press the ON/OFF button.
5- When the device turns off, press the ENTER button to store the code. The LED will turn off.
Those who know nothing know just as much as those who know no more than they do. (Pierre Dac)
This is an alternative method to program your device without using the code list. The remote control will scan the code list to find the one that corresponds to your device.
1- Turn on the device you want to program.
2- Point the remote control at the device and press the CODE SEARCH button for at least 3 seconds until the red LED lights up continuously.
3- Press the button for the type of device (TV, DVD, VCR, ...). The LED will blink once, then stay on.
4- Slowly and repeatedly press the ON/OFF button on your remote control until the device you are trying to program turns off. Note that the LED will blink once each time you press the ON/OFF button.
5- When the device turns off, press the ENTER button to store the code. The LED will turn off.
Those who know nothing know just as much as those who know no more than they do. (Pierre Dac)
Hello
I don't have a direct answer, but I found a technique to retrieve the code for your Thomson:
Code Search:
If you do not have access to the manual to find the codes: The Jumbo universal remotes have an automatic code search that will go through each of the codes until it finds the one that works for your device. To use the code search, turn on the device you want to configure. Point the remote control at it and hold down the "Code Search" button until the light is solid red. Press the button corresponding to the device you want to set up, such as "TV" or "DVD." With the remote pointing at the device, press the "On/Off" button repeatedly. Continue until you turn on the device. When it turns off, press "Enter" to set the command. Use the "On/Off" button and see if the device is powered on. This adjustment is complete. If not, try searching for the code again and make sure to press the "Enter" button quickly when the device is off.
-- no guarantee --
--
Those who know nothing know just as much as those who don't know any more than they do. (Pierre Dac)
I don't have a direct answer, but I found a technique to retrieve the code for your Thomson:
Code Search:
If you do not have access to the manual to find the codes: The Jumbo universal remotes have an automatic code search that will go through each of the codes until it finds the one that works for your device. To use the code search, turn on the device you want to configure. Point the remote control at it and hold down the "Code Search" button until the light is solid red. Press the button corresponding to the device you want to set up, such as "TV" or "DVD." With the remote pointing at the device, press the "On/Off" button repeatedly. Continue until you turn on the device. When it turns off, press "Enter" to set the command. Use the "On/Off" button and see if the device is powered on. This adjustment is complete. If not, try searching for the code again and make sure to press the "Enter" button quickly when the device is off.
-- no guarantee --
--
Those who know nothing know just as much as those who don't know any more than they do. (Pierre Dac)