Problème de gravure sur dvd double couche, ne grave que la 1ère. [Fermé]

Signaler
-
 Jessyca -
Bonjour,

Je rencontre un problème inattendu depuis avant-hier, qui ne m'était jamais arrivé auparvant. Je possède Néro 10 et comme d'habitude, j'ai voulu graver une image iso de 7 Gb sur un DVD Double Couche, et Néro grave la première couche puis s'arrête soudain lorsque le moment vient à passer à la deuxième couche de gravure: en effet, il ne grave que la première couche, puis ne passe pas à la deuxième, arrête la gravure et me bousille :( le dvd (au prix que ça coûte)! J'en suis déjà à 5 DVDs jettés à la poubelle, mais ce qui est le plus étrange, c'est que se problème ne se pose pas si je grave (avec les mêmes DVDs) un DVD de données normales en mode ISO ou en mode UDF. Ce problème est survenu depuis hier, et j'ai déjà gravé 200 DVDs double couche avec mon graveur auparavant, toutes les gravures se sont parfaitement déroulées, que ce soient des dvds de données ou des images iso que je brulait dessus, avec des DVDs de la même marque (MediaRange, marque allemande). J'ai déjà acheté deux bobines chez mon fournisseurs de 100 DVDs chacune de cette marque, aucun problème, les problème ont commencés dès que j'ai commencé à graver avec les DVDs de la nouvelee bobine reçue avant hier. Je n'ai pas de problèmes à graver des DVD5 (4,7Gb), que ce soit des isos, des dvds de données, etc. J'ai changé de graveur pensant que le problème provenait du graveur, mais le problème à persisté. J'ai donc remis le graveur antérieur, qui est un LG GH22LP20.

J'ai actualisé le firmware de mon graveur, et le problème persiste. J'ai essayé de graver à 8x au lieu des 4x avec lequels je grave habituellement, mais le problème persiste. Je ne comprends pas que mon graveur me grave sans problème des DVD9 de données et ne parviens pas à me bruler une iso dessus, ne gravant qu'une seule couche au lieu des deux alors qu'il y a deux jours il tout allait bien. En regardant les codes d'erreurs que me donne le log de néro, il s'avère que le problème proviendrai d'une erreur dans le CDB, command descriptor block

http://en.wikipedia.org/wiki/Key_Code_Qualifier

5

24

00

Illegal Request - invalid field in CDB (Command Descriptor Block)

Voici le passage du log de Nero qui me l'indique:


11:32:34 #16 SPTI -1066 File SCSIPassThrough.cpp, Line 224
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x076ba580: Len x648

Finalement, j'ai essayé de graver mon image avec Néro 12, version essai que j'ai téléchargé d'Internet et le problème persiste.

Conclusions:

1 - l'erreur ne peux provenir du graveur, j'ai essayé avec un autre graveur et cela fait pareil.
2 - le firmware est actualisé et je doute qu'il s'agisse d'un problème de software, car cela à fait de même tant avec Néro 10 (qui est celui que j'utilise et qui à toujours bien fonctionné) qu'avec Néro 12.
3 - l'erreur ne peux provenir des dvds, car il s'agit de la marque que j'utilise habituellement et j'ai déjà gravé 200 dvds double layers avec auparavant sans aucun problème, je lui fait donc totalement confiance.

Je ne sais donc d'oú peux provenir le problème, surtout qu'il grave sans problème les dvds de données et le problème se limite à la brulure d'images. Je suis desespérée. Je sais juste que le problème provient, d'après le log, d'une erreur du CDB, et je ne sais comment y remedier, et en outre je ne sais ce que signifie que ce code d'erreur du Néro: 1066.

Ma config:

Windows 7 Ultimate 64 bits.
4GB ram


Quelqu'un peux m'aider s'il vous plait?

Jessyca.

1 réponse

voici le log complet de Néro:


Windows 7 6.1
AMD64
Wow64Process
Nero Version: 11.0.23.100
Internal Version: 11,0,23,100

Recorder: <HL-DT-ST DVD-RAM GH22LP20>Version: 1.04 - HA 1 TA 0 - 11.0.23.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
CD-ROM: <HL-DT-ST DVD-RAM GH22LP20>Version: 1.04 - HA 1 TA 0 - 11.0.23.100
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GH22LP20 D: CdRom0
PHILIPS PBRW5232L E: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4093MB (4191800kB)
Free physical memory: 1998MB (2046088kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.12.2012
Graver une image DVD
11:32:33 #1 Text 0 File SCSIPTICommands.cpp, Line 464
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

11:32:33 #2 Text 0 File Burncd.cpp, Line 3609
Turn on Disc-At-Once, using DVD media

11:32:34 #3 Text 0 File DlgWaitCD.cpp, Line 333
[D: DVD-RAM GH22LP20] Last possible write address on media: 4173823
Last address to be written: 4014191

11:32:34 #4 Text 0 File DlgWaitCD.cpp, Line 345
[D: DVD-RAM GH22LP20] Write in overburning mode: NO (enabled: CD)

11:32:34 #5 Text 0 File DlgWaitCD.cpp, Line 2970
Recorder: HL-DT-ST DVD-RAM GH22LP20, Media type: DVD+R DL
Disc Manufacturer ID: <MBIPG101>, Media Type ID: <R10>, Product revision number: 65
Disc Application Code: 0, Extended Information Indicators: 3

11:32:34 #6 Text 0 File DlgWaitCD.cpp, Line 525
[D: DVD-RAM GH22LP20] >>> Protocol of DlgWaitCD activities: <<<
=========================================

11:32:34 #7 Text 0 File ThreadedTransferInterface.cpp, Line 878
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 4014192 (4014192) = #4014192/892:2.42
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4014192 blocks [D: HL-DT-ST DVD-RAM GH22LP20]
--------------------------------------------------------------

11:32:34 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1094
Prepare [D: HL-DT-ST DVD-RAM GH22LP20] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8221065216, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 4014192 | 4014192 | 0x00
4014192 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
MediaType: DVD+R DL

11:32:34 #9 Text 0 File SCSIPTICommands.cpp, Line 251
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

11:32:34 #10 Text 0 File Burncd.cpp, Line 4462
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

11:32:34 #11 PHASE 24 File dlgbrnst.cpp, Line 2030
Caching of files started

11:32:34 #12 Text 0 File Burncd.cpp, Line 4584
Cache writing successful.

11:32:34 #13 PHASE 25 File dlgbrnst.cpp, Line 2030
Caching of files completed

11:32:34 #14 PHASE 36 File dlgbrnst.cpp, Line 2030
Burn process started at 4x (5.540 Ko/s)

11:32:34 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2924
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

11:32:34 #16 SPTI -1066 File SCSIPassThrough.cpp, Line 224
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x076ba580: Len x648

11:32:34 #17 Text 0 File DVDPlusDualLayer.cpp, Line 1943
GetDriveCaps: LAST LBA of layer 1 is 0

11:32:34 #18 Text 0 File DVDPlusDualLayer.cpp, Line 1462
SetDriveCaps: Set LAST LBA of layer 1 to 2007103

11:32:34 #19 Text 0 File DVDPlusDualLayer.cpp, Line 1943
GetDriveCaps: LAST LBA of layer 1 is 2007103

11:32:34 #20 Text 0 File DVDPlusDualLayer.cpp, Line 620
Disc finalized, LBA total Image size: 4014192 (7840MB), Last LBA L0: 2007103 (3920MB)

11:32:34 #21 Text 0 File DVDPlusDualLayer.cpp, Line 1462
SetDriveCaps: Set LAST LBA of layer 1 to 2007103

11:32:34 #22 Text 0 File DVDPlusDualLayer.cpp, Line 1943
GetDriveCaps: LAST LBA of layer 1 is 2007103

11:32:34 #23 Text 0 File DVDPlusDualLayer.cpp, Line 787
L0 Data Zone Capacity set to 2007104 (1EA040h, 3920MB) -> OK, confirmed setting

11:32:34 #24 CDR -1205 File DVDPlusDualLayer.cpp, Line 814
Burning Layer 1

11:32:34 #25 Text 0 File DVDPlusDualLayer.cpp, Line 824
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

11:32:34 #26 Text 0 File Cdrdrv.cpp, Line 10673
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MBIPG101
Media type ID: R10
Product revision number: 65
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..783]:
00 00 03 4D 42 49 50 47 - 31 30 31 52 31 30 41 40 ...MBIPG101R10A@
25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7..,l.,l......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................
04 00 33 7B 5C 00 25 69 - 3A 26 1C 0A 0B 20 02 01 ..3{\.%i:&......
01 00 00 58 62 42 26 1C - 0A 0B 20 02 01 01 00 5F ...XbB&........_
84 00 00 43 66 3E 26 1C - 0A 0B 20 02 01 01 00 00 ...Cf>&.........
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:32:34 #27 Text 0 File DVDR.cpp, Line 5668
Drive: HL-DT-ST DVD-RAM GH22LP20
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

11:32:34 #28 CDR -1207 File DVDR.cpp, Line 5595
Book Type automatically set to: DVD-ROM

11:32:34 #29 SPTI -1066 File SCSIPassThrough.cpp, Line 224
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x077c0f00: Len x648

11:32:34 #30 Text 0 File DVDPlusRW.cpp, Line 637
Start write address at LBA 0
DVD high compatibility mode: Yes

11:32:34 #31 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

11:55:36 #32 SPTI -1114 File SCSIPassThrough.cpp, Line 224
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
CDB Data: 0x2A 00 00 1E A0 20 00 00 20 00 00 00
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x13071900: Len x10000
0x00 00 01 BA 44 02 2D 35 65 9D 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 D2 1F C0 0F 03 30 D7 65 7F
0xFB 0D 00 87 23 24 EB 38 0D 4D 82 5B D1 29 85 30

11:55:36 #33 TRANSFER -20 File ThreadedTransfer.cpp, Line 1222
Could not perform Write

11:55:36 #34 CDR -1114 File Writer.cpp, Line 339
Reset occurred
D: HL-DT-ST DVD-RAM GH22LP20

11:57:01 #35 Text 0 File DVDPlusRW.cpp, Line 901
EndDAO: Last written address 2007072

11:57:01 #36 Text 0 File DVDPlusDualLayer.cpp, Line 1462
SetDriveCaps: Set LAST LBA of layer 1 to 0

11:57:01 #37 PHASE 38 File dlgbrnst.cpp, Line 2030
Burn process failed at 4x (5.540 Ko/s)

11:57:01 #38 Text 0 File SCSIPTICommands.cpp, Line 301
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:57:01 #39 Text 0 File Cdrdrv.cpp, Line 12125
DriveLocker: UnLockVolume completed

11:57:01 #40 Text 0 File SCSIPTICommands.cpp, Line 464
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

11:57:08 #41 Text 0 File SCSIPTICommands.cpp, Line 251
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME


Merci de m'aider s'il vous plait ! :D