[Pbs gravure avec Nero StartSmart]

Bonjour à tous,

Je me permets de laisser un message afin de voir si quelqu'un aurait la solution à mon problème.

J'ai un problème avec mon graveur depuis un certain temps, toutes mes gravures échouent. J'ulise Nero StartSmart mais j'ai essayé avec la dernière version de Nero mais sans grand résultat. Je ne sais pas si mon problème vient de mon graveur, de mes cd vierges (Sony 700mb x100), ou de mon logiciel de gravure (mais je ne pense pas que ce soit la faute de ce dernier). Je n'y connais pas grand chose en informatique c'est pourquoi je fais appel à vous en espérant que j'obtiendrais une réponse!
J'ai pensé que de c/c le rapport d'erreur pouvait aider, donc le voici :

1A20-020E-0000-1349-1210-6697*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:04
Version de Nero : 6.3.1.6 (Nero Express)
Graveur : <HL-DT-ST CD-RW GCE-8525B>Version: 1.03 - HA 1 TA 0 - 6.3.1.6
Pilote d'adaptateur :<atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM : <HL-DT-ST DVD-ROM GDR8163B>Version: 0B15 - HA 1 TA 1 - 6.3.1.6
Pilote d'adaptateur :<atapi> HA 1

Scsi-Device-Map

DiskPeripheral : SAMSUNG SP0411N atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST340014A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: Off

CDRom-Device-Map

HL-DT-ST CD-RW GCE-8525B D: CDRom0
HL-DT-ST DVD-ROM GDR8163 E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 758MB (777004kB)
Free physical memory: 367MB (376620kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.9.2006
CD-ROM (ISO)
15:57:47 #1 Text 0 File Isodoc.cpp, Line 6062
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

15:57:47 #2 Phase 90 File dlgbrnst.cpp, Line 1841
Protection contre les ruptures activée

15:57:47 #3 Text 0 File Reader.cpp, Line 118
Reader running

15:57:47 #4 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST CD-RW GCE-8525B running

15:57:47 #5 ISO9660GEN -11 File geniso.cpp, Line 3898
First writeable address = 0 (0x00000000)

15:57:47 #6 Text 0 File Burncd.cpp, Line 3198
Turn on Piste par piste, using CD-R/RW media

15:57:49 #7 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 351143 ( 78:03.68)

15:57:49 #8 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

15:57:49 #9 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: HL-DT-ST CD-RW GCE-8525B;
CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

15:57:49 #10 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)

15:57:49 #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 351144 (351144) = #351144/78:1.69
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 351142 blocks [HL-DT-ST CD-RW GCE-8525B ]
--------------------------------------------------------------

15:57:49 #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [HL-DT-ST CD-RW GCE-8525B ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 719450112, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
351144 | lead-out | 1 | 0x00 | 0x41

15:57:49 #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
Removed 2 run-out blocks from end of track 1. Length: 351144 -> 351142.

15:57:49 #14 Phase 24 File dlgbrnst.cpp, Line 1841
Début de mise en cache des fichiers

15:57:50 #15 Text 0 File Burncd.cpp, Line 4214
Cache writing successful.

15:57:50 #16 Phase 25 File dlgbrnst.cpp, Line 1841
Cache des fichiers terminé

15:57:50 #17 Phase 36 File dlgbrnst.cpp, Line 1841
Début de gravure à 12x (1 800 Ko/s)

15:57:50 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:57:50 #19 Text 0 File Mmc.cpp, Line 19874
Set BUFE: supported -> ON

16:04:14 #20 SCSI -1135 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05550000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x05 0x28 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

16:04:14 #21 CDR -1135 File Writer.cpp, Line 304
Erreur écriture

16:04:14 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

16:04:14 #23 CDR -201 File WriterStatus.cpp, Line 196
Fonction writestate invalide
HL-DT-ST CD-RW GCE-8525B\H1 T0

16:04:14 #24 TRANSFER -18 File WriterStatus.cpp, Line 196
Impossible d'exécuter EndTrack

16:04:14 #25 Text 0 File Mmc.cpp, Line 14718
<HL-DT-STCD-RW GCE-8525B > start Close Session

16:04:47 #26 Phase 38 File dlgbrnst.cpp, Line 1841
La gravure a échoué à 12x (1 800 Ko/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 18/08/2001 07:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/03/2005 00:28:09 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1133 (xpsp2.020921-0842), size=87040 bytes, created 16/10/2002 17:31:10 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Merci d'avance pour votre aide =]