[EMM386]
YanS
-
aranjuez31 Messages postés 8069 Statut Contributeur -
aranjuez31 Messages postés 8069 Statut Contributeur -
Alor voila je cherchai a installé des nouveau pilotes pour le chipset de ma carte graphike j'installé et puis voila il me demande normalement pour redemarrer l'ordinateur et puis voila jarrive pas a aceeder a mon WinXP
il y le message d'erreur suivant :
___________________________________________________
The system memory manager (EMM386.EXE) has detected an error caused by a fault in one of the device drivers or programs loaded in the system.
Due to this fault the system probably in an unstable state, and you are therefore recommended to reboot the computer immediately. If the problem persists, then try to isolate which program is at fault (if you have loaded several, then load them one at a time until the fault appears), then contact the technical support department for that program.
Advended technical information:
Exception 6 (Invalid Opcode).
DS = ECEA ES=0070 EAX=0000C82E EBX=001B000C EDX=00003207 FS=A000 SS=ECEA ESP=0000B1B6 ESI=000F000 EDI=0019002C GS=E000 CS=FCEA EIP=00000CA6 EFLAS=00023082 TR=0018 LDTR=0000
CR0=800000011 CR2=00000000 CR3=0018F000 CR4=00000001
CS:[IP]= FE 25 FC F 8B E8 81 E5 FC 03 C0 EC 04 BE 9E 00
SS:[SP]=1B58 1B36 0003 01F7 88D1 C858 CE45 0010 CD70 0000 0000 0000
Hold down the Ctrl and Alt keys and press Del to reboot, press any other key to just abort the current program
_____________________________________________________
Et voila l'ecran rest figé... Meme si je reboot je retrouve ce meme message ou jarrive pas a allé plus loin...
SVP AIDEZ MOI.... Je Vous REMERCI d'AVANCE...
.........Que dois-je faire?
il y le message d'erreur suivant :
___________________________________________________
The system memory manager (EMM386.EXE) has detected an error caused by a fault in one of the device drivers or programs loaded in the system.
Due to this fault the system probably in an unstable state, and you are therefore recommended to reboot the computer immediately. If the problem persists, then try to isolate which program is at fault (if you have loaded several, then load them one at a time until the fault appears), then contact the technical support department for that program.
Advended technical information:
Exception 6 (Invalid Opcode).
DS = ECEA ES=0070 EAX=0000C82E EBX=001B000C EDX=00003207 FS=A000 SS=ECEA ESP=0000B1B6 ESI=000F000 EDI=0019002C GS=E000 CS=FCEA EIP=00000CA6 EFLAS=00023082 TR=0018 LDTR=0000
CR0=800000011 CR2=00000000 CR3=0018F000 CR4=00000001
CS:[IP]= FE 25 FC F 8B E8 81 E5 FC 03 C0 EC 04 BE 9E 00
SS:[SP]=1B58 1B36 0003 01F7 88D1 C858 CE45 0010 CD70 0000 0000 0000
Hold down the Ctrl and Alt keys and press Del to reboot, press any other key to just abort the current program
_____________________________________________________
Et voila l'ecran rest figé... Meme si je reboot je retrouve ce meme message ou jarrive pas a allé plus loin...
SVP AIDEZ MOI.... Je Vous REMERCI d'AVANCE...
.........Que dois-je faire?
