Pb inconnu SS FC4

Au niveau /var/log/dmesg tu as quoi ?

Salut!

Voici les logs:

dmesg:

Linux version 2.6.14-1.1637_FC4 (bhcompile@hs20-bc1-4.build.redhat.com) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 Wed Nov 9 18:19:37 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037ff0000 (usable)
BIOS-e820: 0000000037ff0000 - 0000000037ff3000 (ACPI NVS)
BIOS-e820: 0000000037ff3000 - 0000000038000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
895MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 229360
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225264 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 VIA694 ) @ 0x000f7170
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x37ff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x37ff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 40000000 (gap: 38000000:c7ff0000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/1 rhgb quiet
Initializing CPU#0
CPU 0 irqstacks, hard=c03f4000 soft=c03f3000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1477.679 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 904392k/917440k available (2108k kernel code, 12472k reserved, 713k data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2959.91 BogoMIPS (lpj=5919835)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
CPU: CLK_CTL MSR was 6003d223. Reprogramming to 2003d223
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f1ff c1c3f9ff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) XP 1700+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0a20)
checking if image is initramfs... it is
Freeing initrd memory: 1075k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb250, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: e4000000-e5ffffff
PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1132318586.460:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 2A9D19A62139EA9
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 2 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 11
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 4D040H2, ATA DISK drive
hdb: WDC WD2000JB-00GVA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: Pioneer DVD-ROM ATAPIModel DVD-105S 013, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 >
hdb: max request size: 1024KiB
hdb: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1 < hdb5 hdb6 hdb7 >
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.39
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
SLPB PCI0 USB0 USB1 USB2 UAR1 LPT1
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 172k freed
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 6 roles, 882 types, 107 bools
security: 55 classes, 241893 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev hda6, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
e100: eth0: e100_probe: addr 0xe7100000, irq 5, MAC addr 00:90:27:A4:21:D0
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:11.5 to 64
NET: Registered protocol family 23
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
bttv0: Bt878 (rev 17) at 0000:00:09.0, irq: 11, latency: 32, mmio: 0xe7101000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ff27ff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: miro: id=9 tuner=3 radio=no stereo=no
bttv0: using tuner=3
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 0-0060: All bytes are equal. It is not a TEA5767
tuner 0-0060: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:00:09.1[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
bt878(0): Bt878 (rev 17) at 00:09.1, irq: 11, latency: 32, memory: 0xe7102000
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:11.2: UHCI Host Controller
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:11.2: irq 5, io base 0x0000d800
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:11.3: UHCI Host Controller
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:11.3: irq 5, io base 0x0000dc00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4811
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
cdrom: open failed.
EXT3 FS on hda6, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda10, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda5, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdb6, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdb5, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdb7, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda2, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda8, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda7, type ext3), uses xattr
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda3, type ext3), uses xattr
Vendor: HP Model: PSC 1610 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: device scan complete
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03812a0(lo)
IPv6 over IPv4 tunneling driver
Adding 923696k swap on /dev/hda9. Priority:-1 extents:1 across:923696k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

et messages:

Nov 18 12:57:43 rjcserveur nmbd[2306]:
Nov 18 12:57:43 rjcserveur nmbd[2306]: *****
Nov 18 12:57:56 rjcserveur nmbd[2306]: [2005/11/18 12:57:56, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(396)
Nov 18 12:57:56 rjcserveur nmbd[2306]: *****
Nov 18 12:57:56 rjcserveur nmbd[2306]:
Nov 18 12:57:56 rjcserveur nmbd[2306]: Samba name server RJCSERVEUR is now a local master browser for workgroup NETWORKRJC on subnet 192.168.2.2
Nov 18 12:57:56 rjcserveur nmbd[2306]:
Nov 18 12:57:56 rjcserveur nmbd[2306]: *****
Nov 18 12:57:59 rjcserveur gdm(pam_unix)[2620]: session opened for user root by (uid=0)
Nov 18 12:57:59 rjcserveur gdm[2620]: gdm_slave_session_start : /root peut être modifié par le groupe.
Nov 18 12:57:59 rjcserveur gdm[2620]: gdm_auth_user_add : /root peut être modifié par le groupe.
Nov 18 12:58:21 rjcserveur pam_timestamp_check: pam_timestamp: `/' permissions are lax
Nov 18 12:58:23 rjcserveur gconfd (root-2816): démarrage (version 2.10.0), pid 2816 utilisateur « root »
Nov 18 12:58:23 rjcserveur gconfd (root-2816): Mauvaise permission 770 sur le répertoire /tmp/gconfd-root
Nov 18 12:58:23 rjcserveur gconfd (root-2816): L'obtention du verrou pour le démon a échoué, sortie : Le répertoire /tmp/gconfd-root a des problèmes, gconfd ne peut l'utiliser
Nov 18 12:58:23 rjcserveur gconfd (root-2818): démarrage (version 2.10.0), pid 2818 utilisateur « root »
Nov 18 12:58:23 rjcserveur gconfd (root-2818): Mauvaise permission 770 sur le répertoire /tmp/gconfd-root
Nov 18 12:58:23 rjcserveur gconfd (root-2818): L'obtention du verrou pour le démon a échoué, sortie : Le répertoire /tmp/gconfd-root a des problèmes, gconfd ne peut l'utiliser
Nov 18 12:58:23 rjcserveur gconfd (root-2820): démarrage (version 2.10.0), pid 2820 utilisateur « root »
Nov 18 12:58:23 rjcserveur gconfd (root-2820): Mauvaise permission 770 sur le répertoire /tmp/gconfd-root
Nov 18 12:58:23 rjcserveur gconfd (root-2820): L'obtention du verrou pour le démon a échoué, sortie : Le répertoire /tmp/gconfd-root a des problèmes, gconfd ne peut l'utiliser
Nov 18 12:58:24 rjcserveur gconfd (root-2822): démarrage (version 2.10.0), pid 2822 utilisateur « root »
Nov 18 12:58:24 rjcserveur gconfd (root-2822): Mauvaise permission 770 sur le répertoire /tmp/gconfd-root
Nov 18 12:58:24 rjcserveur gconfd (root-2822): L'obtention du verrou pour le démon a échoué, sortie : Le répertoire /tmp/gconfd-root a des problèmes, gconfd ne peut l'utiliser
Nov 18 12:58:24 rjcserveur gconfd (root-2824): démarrage (version 2.10.0), pid 2824 utilisateur « root »
Nov 18 12:58:24 rjcserveur gconfd (root-2824): Mauvaise permission 770 sur le répertoire /tmp/gconfd-root
Nov 18 12:58:24 rjcserveur gconfd (root-2824): L'obtention du verrou pour le démon a échoué, sortie : Le répertoire /tmp/gconfd-root a des problèmes, gconfd ne peut l'utiliser
Nov 18 12:58:25 rjcserveur gconfd (root-2827): démarrage (version 2.10.0), pid 2827 utilisateur « root »
Nov 18 12:58:25 rjcserveur gconfd (root-2827): Mauvaise permission 770 sur le répertoire /tmp/gconfd-root
Nov 18 12:58:25 rjcserveur gconfd (root-2827): L'obtention du verrou pour le démon a échoué, sortie : Le répertoire /tmp/gconfd-root a des problèmes, gconfd ne peut l'utiliser
Nov 18 12:58:26 rjcserveur pam_timestamp_check: pam_timestamp: `/' permissions are lax
Nov 18 12:58:27 rjcserveur gconfd (root-2829): démarrage (version 2.10.0), pid 2829 utilisateur « root »
Nov 18 12:58:27 rjcserveur gconfd (root-2829): Mauvaise permission 770 sur le répertoire /tmp/gconfd-root
Nov 18 12:58:27 rjcserveur gconfd (root-2829): L'obtention du verrou pour le démon a échoué, sortie : Le répertoire /tmp/gconfd-root a des problèmes, gconfd ne peut l'utiliser
Nov 18 12:58:27 rjcserveur gconfd (root-2831): démarrage (version 2.10.0), pid 2831 utilisateur « root »
Nov 18 12:58:27 rjcserveur gconfd (root-2831): Mauvaise permission 770 sur le répertoire /tmp/gconfd-root
Nov 18 12:58:27 rjcserveur gconfd (root-2831): L'obtention du verrou pour le démon a échoué, sortie : Le répertoire /tmp/gconfd-root a des problèmes, gconfd ne peut l'utiliser
Nov 18 12:58:27 rjcserveur gconfd (root-2833): démarrage (version 2.10.0), pid 2833 utilisateur « root »
Nov 18 12:58:27 rjcserveur gconfd (root-2833): Mauvaise permission 770 sur le répertoire /tmp/gconfd-root
Nov 18 12:58:27 rjcserveur gconfd (root-2833): L'obtention du verrou pour le démon a échoué, sortie : Le répertoire /tmp/gconfd-root a des problèmes, gconfd ne peut l'utiliser
Nov 18 12:58:27 rjcserveur gconfd (root-2835): démarrage (version 2.10.0), pid 2835 utilisateur « root »
Nov 18 12:58:27 rjcserveur gconfd (root-2835): Mauvaise permission 770 sur le répertoire /tmp/gconfd-root
Nov 18 12:58:27 rjcserveur gconfd (root-2837): démarrage (version 2.10.0), pid 2837 utilisateur « root »
Nov 18 12:58:27 rjcserveur gconfd (root-2837): Mauvaise permission 770 sur le répertoire /tmp/gconfd-root
Nov 18 12:58:27 rjcserveur gconfd (root-2837): L'obtention du verrou pour le démon a échoué, sortie : Le répertoire /tmp/gconfd-root a des problèmes, gconfd ne peut l'utiliser
Nov 18 12:58:27 rjcserveur gconfd (root-2835): L'obtention du verrou pour le démon a échoué, sortie : Le répertoire /tmp/gconfd-root a des problèmes, gconfd ne peut l'utiliser
Nov 18 12:58:31 rjcserveur pam_timestamp_check: pam_timestamp: `/' permissions are lax
Nov 18 12:59:06 rjcserveur last message repeated 7 times
Nov 18 13:00:01 rjcserveur last message repeated 11 times
Nov 18 13:00:01 rjcserveur smbd[2851]: [2005/11/18 13:00:01, 0] lib/util_sock.c:get_peer_addr(1150)
Nov 18 13:00:01 rjcserveur smbd[2851]: getpeername failed. Error was Noeud final de transport n'est pas connecté
Nov 18 13:00:02 rjcserveur smbd[2851]: [2005/11/18 13:00:02, 0] lib/util_sock.c:get_peer_addr(1150)
Nov 18 13:00:02 rjcserveur smbd[2851]: getpeername failed. Error was Noeud final de transport n'est pas connecté
Nov 18 13:00:02 rjcserveur smbd[2851]: [2005/11/18 13:00:02, 0] lib/access.c:check_access(328)
Nov 18 13:00:02 rjcserveur smbd[2851]: [2005/11/18 13:00:02, 0] lib/util_sock.c:get_peer_addr(1150)
Nov 18 13:00:02 rjcserveur smbd[2851]: getpeername failed. Error was Noeud final de transport n'est pas connecté
Nov 18 13:00:02 rjcserveur smbd[2851]: Denied connection from (0.0.0.0)
Nov 18 13:00:02 rjcserveur smbd[2851]: [2005/11/18 13:00:02, 0] lib/util_sock.c:get_peer_addr(1150)
Nov 18 13:00:02 rjcserveur smbd[2851]: getpeername failed. Error was Noeud final de transport n'est pas connecté
Nov 18 13:00:02 rjcserveur smbd[2851]: Connection denied from 0.0.0.0
Nov 18 13:00:02 rjcserveur smbd[2851]: [2005/11/18 13:00:02, 0] lib/util_sock.c:write_socket_data(430)
Nov 18 13:00:02 rjcserveur smbd[2851]: write_socket_data: write failure. Error = Connexion ré-initialisée par le correspondant
Nov 18 13:00:02 rjcserveur smbd[2851]: [2005/11/18 13:00:02, 0] lib/util_sock.c:write_socket(455)
Nov 18 13:00:02 rjcserveur smbd[2851]: write_socket: Error writing 5 bytes to socket 25: ERRNO = Connexion ré-initialisée par le correspondant
Nov 18 13:00:02 rjcserveur smbd[2851]: [2005/11/18 13:00:02, 0] lib/util_sock.c:send_smb(647)
Nov 18 13:00:02 rjcserveur smbd[2851]: Error writing 5 bytes to client. -1. (Connexion ré-initialisée par le correspondant)
Nov 18 13:00:06 rjcserveur pam_timestamp_check: pam_timestamp: `/' permissions are lax
Nov 18 13:00:41 rjcserveur last message repeated 7 times
Nov 18 13:01:46 rjcserveur last message repeated 13 times
Nov 18 13:02:51 rjcserveur last message repeated 13 times
Nov 18 13:03:56 rjcserveur last message repeated 13 times
Nov 18 13:05:01 rjcserveur last message repeated 13 times
Nov 18 13:06:06 rjcserveur last message repeated 13 times
Nov 18 13:07:11 rjcserveur last message repeated 13 times
Nov 18 13:08:16 rjcserveur last message repeated 13 times
Nov 18 13:09:21 rjcserveur last message repeated 13 times
Nov 18 13:10:26 rjcserveur last message repeated 13 times
Nov 18 13:11:31 rjcserveur last message repeated 13 times
Nov 18 13:12:36 rjcserveur last message repeated 13 times
Nov 18 13:13:41 rjcserveur last message repeated 13 times
Nov 18 13:14:46 rjcserveur last message repeated 13 times
Nov 18 13:15:51 rjcserveur last message repeated 13 times
Nov 18 13:16:56 rjcserveur last message repeated 13 times
Nov 18 13:18:01 rjcserveur last message repeated 13 times
Nov 18 13:19:06 rjcserveur last message repeated 13 times
Nov 18 13:20:11 rjcserveur last message repeated 13 times
Nov 18 13:21:16 rjcserveur last message repeated 13 times
Nov 18 13:22:21 rjcserveur last message repeated 13 times
Nov 18 13:23:26 rjcserveur last message repeated 13 times
Nov 18 13:24:31 rjcserveur last message repeated 13 times
Nov 18 13:25:36 rjcserveur last message repeated 13 times
Nov 18 13:26:37 rjcserveur last message repeated 12 times
Nov 18 13:27:42 rjcserveur last message repeated 13 times
Nov 18 13:28:47 rjcserveur last message repeated 13 times
Nov 18 13:29:52 rjcserveur last message repeated 13 times
Nov 18 13:30:57 rjcserveur last message repeated 13 times
Nov 18 13:32:02 rjcserveur last message repeated 13 times
Nov 18 13:32:12 rjcserveur last message repeated 2 times
Nov 18 13:32:12 rjcserveur smbd[3120]: [2005/11/18 13:32:12, 0] lib/util_sock.c:get_peer_addr(1150)
Nov 18 13:32:12 rjcserveur smbd[3120]: getpeername failed. Error was Noeud final de transport n'est pas connecté
Nov 18 13:32:12 rjcserveur smbd[3120]: [2005/11/18 13:32:12, 0] lib/access.c:check_access(328)
Nov 18 13:32:12 rjcserveur smbd[3120]: [2005/11/18 13:32:12, 0] lib/util_sock.c:get_peer_addr(1150)
Nov 18 13:32:12 rjcserveur smbd[3120]: getpeername failed. Error was Noeud final de transport n'est pas connecté
Nov 18 13:32:12 rjcserveur smbd[3120]: Denied connection from (0.0.0.0)
Nov 18 13:32:12 rjcserveur smbd[3120]: [2005/11/18 13:32:12, 0] lib/util_sock.c:get_peer_addr(1150)
Nov 18 13:32:12 rjcserveur smbd[3120]: getpeername failed. Error was Noeud final de transport n'est pas connecté
Nov 18 13:32:12 rjcserveur smbd[3120]: Connection denied from 0.0.0.0
Nov 18 13:32:12 rjcserveur smbd[3120]: [2005/11/18 13:32:12, 0] lib/util_sock.c:write_socket_data(430)
Nov 18 13:32:12 rjcserveur smbd[3120]: write_socket_data: write failure. Error = Connexion ré-initialisée par le correspondant
Nov 18 13:32:12 rjcserveur smbd[3120]: [2005/11/18 13:32:12, 0] lib/util_sock.c:write_socket(455)
Nov 18 13:32:12 rjcserveur smbd[3120]: write_socket: Error writing 5 bytes to socket 5: ERRNO = Connexion ré-initialisée par le correspondant
Nov 18 13:32:12 rjcserveur smbd[3120]: [2005/11/18 13:32:12, 0] lib/util_sock.c:send_smb(647)
Nov 18 13:32:12 rjcserveur smbd[3120]: Error writing 5 bytes to client. -1. (Connexion ré-initialisée par le correspondant)
Nov 18 13:32:17 rjcserveur pam_timestamp_check: pam_timestamp: `/' permissions are lax
Nov 18 13:32:52 rjcserveur last message repeated 7 times
Nov 18 13:33:57 rjcserveur last message repeated 13 times
Nov 18 13:35:02 rjcserveur last message repeated 13 times
Nov 18 13:36:07 rjcserveur last message repeated 13 times
Nov 18 13:37:12 rjcserveur last message repeated 13 times
Nov 18 13:38:17 rjcserveur last message repeated 13 times
Nov 18 13:39:22 rjcserveur last message repeated 13 times
Nov 18 13:40:27 rjcserveur last message repeated 13 times
Nov 18 13:41:32 rjcserveur last message repeated 13 times
Nov 18 13:42:37 rjcserveur last message repeated 13 times
Nov 18 13:43:07 rjcserveur last message repeated 6 times
Nov 18 13:43:11 rjcserveur automount[3232]: lookup(program): lookup for .directory failed
Nov 18 13:43:11 rjcserveur automount[3232]: failed to mount /misc/.directory
Nov 18 13:43:12 rjcserveur pam_timestamp_check: pam_timestamp: `/' permissions are lax
Nov 18 13:43:47 rjcserveur last message repeated 7 times

Je ne comprends pas j'ai rien changer comme permissiondans /tmp

Merci

pb d'autorisation sur /tmp/gconfd-root

faire chmod 777 /tmp/gconfd-root
pour voir