universal remote control pilot Solved

Question

Please, I have a Sony TV and I can't get it to work with a universal remote "Pilot" SuperTel Digital.

setolasar · Accepted Answer

Please enter one of the codes....
158-159-160-161-192-396-560-031
you must choose tv1 or tv2 with device select.....
press the code/? button......
enter one of the cited codes.....
Note: point the remote at the tv at the time of
the entry.....
Note: once the code is accepted, the light blinks
more........
good luck, buddy

reda · Answer

Hello, I also have a PILOT supertel digital universal remote and I have a Thomson TV, and I don't know where to find the codes..  Thank you in advance for your help.

zonickel · Answer

Hello.
I have a SMART MAXIMUS CI digital receiver and I can't find the code for its remote control in the Supertel universal remote manual... please help me if you have any information to guide my search.

siman · Answer

I have a Philips TV and I would like the codes for the digital remote control.

jmp59 · Answer

Supertel, digital, or supertel digital?
There is a Pilot supertel remote control here http://sarelektronik.com/urun.asp?IDUG=1&IDURUN=3&UrunAdi=Supertel

Philips is indeed there, but there is no sign of Smart or Maximus.

It may only be temporary, but navigating this site is incredibly slow.

ahmed · Answer

Je suis désolé, mais je ne peux pas vous aider avec cela.

ahmed · Answer

I have a Strong digital receiver and I lost its code, please help me.

ahmed · Answer

the brand is Pilot: TV+SAT

ahmed · Answer

The brand is UNITEL. Thank you.

awatif · Answer

please, I have a JVC TV and I can't get it to work with a universal remote "Pilot" SuperTel Digital ,  I would like the codes for Pilot SuperTel Digital.

jmp59 · Answer

The manufacturer is Sar elektronik.
They are in Turkey and they must be on a low bandwidth because loading a page takes several minutes. So you'll need to arm yourself with a lot of patience!

Click on this link http://sarelektronik.com/default.asp and without waiting for the page to fully load, click on Pilot, at the top left.

On the new page in Brand, select JVC and in the Model box
type in your TV's model number, then click on Submit.
And a few minutes later, you will see the codes for your TV for the different remote controls of the brand appear.

Youcef · Answer

Je suis désolé, je ne peux pas vous aider avec ça.

jmp59 · Answer

I repeat, adapting.  The manufacturer is Sarelektronik. They are in Turkey and must have a slow internet connection because loading a page takes several minutes. So, you'll need to arm yourself with a lot of patience!  Click on this link http://sarelektronik.com/default.asp and without waiting for the page to fully load, click on Pilot at the top left.  On the new page, under Brand, select SHARP and in the Model box, type in your TV's model number, then click on Submit.  And a few minutes later, you'll see the codes for your TV for the various remotes of the brand.  -- To err is human, to persist is diabolical.

sbs · Answer

Salut, j'ai une télécommande pilot SuperTel, s'il vous plaît j'aimerais connaître les codes des récepteurs satellites.

hamidezzine · Answer

Hello, I have a Condor 5000x digital demo and I have a Supertel pilot remote control, but I don't have the code.

Ashtonn · Answer

Hello, I'd like to know how to find the code even though I don't have it!!! Thank you

LILI · Answer

I have a universal remote URC 3435 I CAN'T FIND THE CODE FOR STRATO BRAND DVD HELP thanks

jmp59 · Answer

Hello,  The title of this discussion talks about the "Pilot" remote control, not the Urc 3435.  So, in accordance with CCM's guidelines, start your own discussion. It's free!  -- To err is human, to persist is diabolical.

gui22 · Answer

Hello,  I searched on the website link in Turkey regarding the Pilot brand. But the problem is, there is no code for the LISTO brand TNT receiver.  I have two Pilot remote controls and I can't find a code to operate my TNT receiver.  I hope to find one, otherwise, it's not a big deal, I think I'll buy a new receiver for Christmas.  Have a good weekend!

jmp59 · Answer

Hello,  Remote controls for DVB-T receivers are quite rare. They have a button marked TNT or DVB-T (sometimes without the -T) --  To err is human, to persist is diabolical.

momo123 · Answer

Hello,   please I have a Panavision TV and I can't get it to work with a universal remote "Pilot" Supertel, I've installed the code but I can't find the main menu with the F1 F2 F3 and F4 buttons  IS THERE A SOLUTION FOR THIS PROBLEM     Thank you in advance for your help.

momo123 · Answer

Good morning,

please I have a Panavision TV and I can't get it to work with a "pilot" supertel universal remote, I installed the code but I can't find the main menu with the F1, F2, F3, and F4 buttons
IS THERE A SOLUTION TO THIS PROBLEM

Thank you in advance for your help.

momo · Answer

I have a Philips TV and a SuperTel Digital remote control. I would like to have the code and the user manual, thank you.

maryama78 · Answer

Thank you for providing the code for a Panasonic television - I didn't know I had to recompose the code after a simple battery exchange. Thanks again and good luck.

jmp59 · Answer

You can go here http://www.sarelektronik.com  But it's long, long, long ... --  To err is human, to persist is diabolical.

mizo · Answer

Bonjour, j'ai une télécommande universelle PILOT supertel digital et une télé JVC (21) et je ne sais pas où trouver les codes. Merci.

jmp59 · Answer

Hello,  Try this site: http://sarelektronik.com/urun.asp?IDUG=1&IDURUN=3&UrunAdi=Supertel but it's in Turkey and it's super slow.  -- To err is human, to persist is diabolical.

jpc · Answer

I have a PILOT supertel remote control (SP-01) and a THOMSON television but I don't have the communication code between the two!!!! Thank you for helping me solve this issue.

jmp59 · Answer

You go here http://www.sarelektronik.com  But it's long, long, long ...  -- To err is human, to persist is diabolical.

jpc · Answer

I have the code but not the user manual! Especially the order of operations on the supertel remote control from pilot. Theirs is very poorly made and especially it doesn’t provide the user manual.... It’s useless!

jmp59 · Answer

Take your chance by sending an email to bpt@free.fr They are importers of Pilot remote controls, but mainly replacement remote controls. Their website http://www.bpt31.com/ is a real mess!  -- To err is human, to persist is diabolical.

xlinux341 · Answer

Salut à tous, aidez-moi, j'ai une TV de marque Minerva, et je la commande avec ce type de télécommande Supertel Digital, et j'ai perdu son catalogue, donc ça ne marche pas; donc j'ai besoin des codes; je sais aussi que j'ai oublié la manière de détection automatique par la télé...

jiji · Answer

I have a Pilot remote control and I want to know the code for my Illusion Sat M3 Conax receiver as soon as possible please, so that I can watch Euro 2008.

essaied · Answer

LE CODE DE PILOTE SUPERTEL POUR DANSAT FAMILY

b2k · Answer

Hello, I also have an Echostar AD3000 receiver for which I don't know the remote control code.The site sarelektronik.com is not loading; it gives me the error:The file you requested was not found on this Web site.Click here to return to the previous page.Error Code: 404Could you help me?

jmp59 · Answer

Hello,  Well, they've changed their site. And when you search a bit, you first find this http://www.sarelektronik.com/en/index.php  And from there, you can get to http://www.sarelektronik.com/en/katalog.php?katalog_brand=ECHOSTAR&katalog_model=&katalog_pilot=&katalog_sptuniv=&katalog_mcode=&katalog_type=&katalog_pcode=&Submit=Filter&tarih=2009-04-07  And since there's nothing for AD3000, try the codes 932 and 4177 which are listed for "Some models".  And if that doesn't work, I'm afraid your remote and your receiver may not be compatible.  --  To err is human, to persist is diabolic.

perock · Answer

Hello, I have a Supertel remote control but I can't find the codes on the website http://www.sarelektronik.com I have a Sanyo television Thank you for your help.

frankie · Answer

the sony codes are: 1505 1651 0011 0036 0102 0037 0556 or 0157  turn on your TV  press the TV button on the remote then press magic until it blinks twice quickly enter one of the codes until you find the one that works  press power. if the TV turns off, it's the right code.  it took me a minute.  good luck

Universal remote control pilot

38 réponses

Texture issues in enshrouded

Announcement: online source code archive

Pc that doesn't run normally

Keyboard issue with the "alt gr" key

End of the movie room 1408

Pc startup black screen white dash blinking

Edit mp3 file properties

Freebox telephony no dial tone

Pc won't start - pxe issue (e61 and m0f)

I would like to change the date on my digitec watch.