gabgabgab
Messages postés888Date d'inscriptionlundi 20 octobre 2008StatutMembreDernière intervention30 avril 2014
-
6 févr. 2010 à 20:39
gabgabgab
Messages postés888Date d'inscriptionlundi 20 octobre 2008StatutMembreDernière intervention30 avril 2014
-
6 févr. 2010 à 21:33
Bonjour, j'ai récemment changé certains de mes composants pour cela :
AMD phenom x2 3.1 ghz
4go de ddr3
9800 GT 512 M0 GDDR 3
500 GO sata 1
460what
J'ai changé la mémoire la carte mère et le processeur, seulement depuis, lorsque je lance un jeu comme crysis ou gtaIV, l'ordinateur me met très vite un rapport d'erreur et ferme le jeu et je me retrouve sur mon bureau. J'ai donc fait différents tests :
D'abord un test avec cpuz :
Processors Information
-------------------------------------------------------------------------
Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name AMD Phenom II X2 550
Codename Callisto
Specification AMD Phenom(tm) II X2 550 Processor
Package Socket AM3 (938)
CPUID F.4.2
Extended CPUID 10.4
Brand ID 29
Core Stepping RB-C2
Technology 45 nm
Core Speed 803.5 MHz
Multiplier x FSB 4.0 x 200.9 MHz
HT Link speed 2008.8 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64, AMD-V
L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 2 x 512 KBytes, 16-way set associative, 64-byte line size
L3 cache 6 MBytes, 48-way set associative, 64-byte line size
FID/VID Control yes
Min FID 4.0x
P-State FID 0xF - VID 0x10
P-State FID 0x8 - VID 0x18
P-State FID 0x3 - VID 0x20
P-State FID 0x100 - VID 0x2C
Package Type 0x1
Model 50
String 1 0x7
String 2 0x6
Page 0x0
TDP Limit 79 Watts
TDC Limit 66 Amps
Attached device PCI device at bus 0, device 24, function 0
Attached device PCI device at bus 0, device 24, function 1
Attached device PCI device at bus 0, device 24, function 2
Attached device PCI device at bus 0, device 24, function 3
Attached device PCI device at bus 0, device 24, function 4
un avec burn in test qui me trouve les erreures suivantes Error
verifying data in RAM
The data written to memory is not the same as the information read from memory. This is a very serious error, much like the “Incorrect mathematical…”, error above. It’s highly likely that your computer is about to crash or lock up.
FPU operation verification failed
The execution of a Floating Point Unit instruction operation came up with the wrong result (e.g. 1.1 + 1.1 = 3.3). FPU instructions include: Floating Point math (e.g. add, subtract, multiply and divide), Transcendentals (e.g. sin, cos) and Load constants (e.g. load Pi).
This is a very serious error for a computer as it means the computer is incapable of execution the same sequence of instructions to get the same result. Possible reasons are faulty RAM, System bus, CPU or overheating. There is a strong chance that your computer will crash or lock up just after an error like this because if the computer can’t add two numbers correctly, there is a good chance that it can’t continue to run a program either.
SSE operation verification failed
The execution of a SSE(1) instruction operation came up with the wrong result. SSE (Streaming SIMD extensions) instructions include a sample of moving SSE(1) registers, adding, subtracting, and multiplying SSE data.
This is a very serious error for a computer as it means the computer is incapable of execution the same sequence of instructions to get the same result. Possible reasons are faulty RAM, System bus, CPU or overheating.
et avec occt voici les liens des courbes de résultats :