HP 2159m Screen Button Lock Solved/Closed

Question

Hello everyone, I need your help because I recently bought a "HP 2159m" monitor. But here's the problem. Before, everything was working perfectly, but today I don't know why or how, when I try to turn off my screen (not my computer), this message appears: "Power button lock" in a white rectangle and the screen doesn't turn off. I'm asking for your help because it's really bothering me :(

Best regards.

Configuration: Mum, mum....

Ninja82 · Accepted Answer

Hello dear friends, It's very simple, just press and hold the power button for about twenty seconds and the lock will deactivate. At your disposal for any further information. Majdi.

f4shii0ndu33 · Answer

help me :(

Eärendur · Answer

I have the same problem with my HP 2309v screen   do you have the answer?   thank you in advance

kévin · Answer

Hi everyone,  Just restore the factory output settings of the screen... (using the buttons at the bottom of the screen)

f4shii0ndu33 · Answer

I solved the problem; I don't know how. I pressed the button and it's working again... There you go ^^

moi · Answer

Simply hold down the stop button for about 10 seconds! In fact, when you do that, it locks the button.

nirvana · Answer

HELLO, YOU NEED TO PRESS AND HOLD THE POWER BUTTON FOR 10 SECONDS TO DISABLE THE BUTTON LOCK.

nounou76 · Answer

Hello,  I had the same problem and I followed the solution proposed by NIVANA and it worked well.  Thank you NIRVANA.

elbaidy kaolack · Answer

With the HP w2338h screen, you need to press for between 30 and 33 seconds.

HP 2159m Screen Button Lock

9 answers

Capistars.fr

This solar-powered, gps-enabled agricultural robot sows and weaves weeds by itself (and without pesticides)

Missing lock icon

Anomalies in my laptop usage: virus?

Meetic change main photo

Avoid driving on august 1st, the worst day for summer traffic.

Self-invoking js function

Suspicion of network compromise / public ip

Full screen mode

Cannot use my ctp18 tablet with meetingbar