PROBLEM WITH FUNAI TV

Gérard -  
 mikevivi -
Hello,
I have a FUNAI LT6-M32BB (LCD) for almost a year.
I also have a VCR, so I connected the antenna to the VCR and then from the VCR to the television (using a SCART cable and HDMI cable).
I don’t have Canal +. However, with my old television, I used to watch Canal + when it was unencrypted.
Now, with my new set, I have the picture but no sound. In fact, to be more precise, I occasionally get sound!!!! ????
Do you have an explanation for me? Has anyone with the same device as mine been able to get Canal (or Paris Première for that matter) when it was unencrypted?
Thank you in advance for any information you can provide.
Configuration: Windows XP Internet Explorer 7.0

3 réponses

Funai France
 
Hello,

Thank you for your loyalty to Funai!
Is the sound issue on Canal + that you are experiencing limited to the periods of broadcast in clear?

If that is the case, we have encountered this problem in the past and we are able to resolve it quickly. I encourage you to contact our customer service at 0820 200 329.

Your television will be taken care of and your issue resolved by an intervention from our services.

Once again, thank you for your purchase, and please accept our apologies for this inconvenience.

Best regards,

Alexandre Sopoçko
General Manager
Funai France
3
terry
 
Hello, since we installed the new Funai screen in our living room, our Free remote only works when the screen is off.
It’s becoming annoying.
Can you tell us if this is an interference issue or a bad connection?
0
choupibelette
 
Hello,

I have a Funai LCD color TV model LT6-M22BB/2 and I have a few issues. It is connected to a Freebox via HDMI and to a home theater system via Scart.

When we turn on the TV, it automatically switches to Scart, while we are watching TV through HDMI. Moreover, when we try to watch a DVD through the home theater system, the picture is very poor, it looks like another channel is broadcasting underneath...

Can you help me resolve these two issues please?
Best regards.
0
laurot
 
Bonjour, j'ai une télévision Funai qui reste en veille et ne se rallume plus. Mes petits-enfants pleurent de ne pas pouvoir regarder leurs dessins animés, mais le problème, c'est que je n'ai pas d'argent pour en acheter une autre. Alors s'il vous plaît, aidez-moi à penser à eux, ils se couchent en attendant de regarder leurs dessins animés. Merci beaucoup de me répondre.
0
mikevivi
 
Hello, when I record France 3 on my Funai VCR, the image is in black and white.

In the VCR settings, France 3 is set to SECAM, but when I look at the TV screen, if I’m on France 2, it shows SECAM, but when I switch to France 3, it says it's in PAL.

If I switch to PAL instead of SECAM in the VCR settings, I can't receive France 3 anymore.

Does anyone have any idea what's going on????

I only have this issue with this channel.

I found channel 8 and 78 on the VCR for France 3, but it doesn't change the problem.

Thank you for your response.
0