1 answer
Hello,
It seems (unless I'm mistaken…) that there is no code for the brand "WESTPOINT," as this brand is not listed in the manufacturer's catalog.
You will need to use the code search function.
To search for all TV codes in your Zapper TV's memory:
1. Make sure your TV is turned on.
2. Press and hold the TV POWER and STB POWER buttons until the LED blinks once, then twice.
3. Press 663 (Channel Down, Channel Down, Volume Up), the LED will blink twice.
4. Press the TV POWER button multiple times until your device turns off.
5. Press MUTE to store the code. The LED will blink twice to confirm.
To search for all STB codes in your Zapper TV's memory:
1. Make sure your STB device is turned on.
2. Press and hold the volume down and volume up buttons until the LED blinks once, then twice.
3. Press 663 (Channel Down, Channel Down, Volume Up), the LED will blink twice.
4. Press the STB POWER button multiple times until your device turns off.
5. Press MUTE to store the code. The LED will blink twice to confirm.
To search for all AMP codes in your Zapper TV's memory:
1. Make sure your audio device is turned on.
2. Press and hold the Channel Down and Channel Up buttons until the LED blinks once, then twice.
3. Press 663 (Channel Down, Channel Down, Volume Up), the LED will blink twice.
4. Press the STB POWER button multiple times until your device turns off.
5. Press MUTE to store the code. The LED will blink twice to confirm.
Additional information:
if the full code load was tested unsuccessfully, the LED will blink three times and the remote will exit programming mode.
@oneforall.worldwide
http://websupport.uebv.com/?lang=FR
To get 663 press the following buttons on the remote:
Channel Down → 6 (two times in a row…) and then Volume Up → 3.
Otherwise...