View original (French)

Conversion from PL7-2 to PL7-PRO

samy -  
 frizoune -
I'm having a problem. I need to convert a program that was originally in PL7-2 to PL7-PRO. To do this, you just need to take the binary file of the PL7-2 program and put it in PL7-PRO, then go to File -> Convert.

But in my case, I can't access the conversion option.
Can someone tell me how to access this mode, or explain how to get there?

I also know that there is the brutal method of rewriting the entire program by hand, but I really don't want to have to type out 200 pages of programming again.

Thanks
Configuration: Windows 2000 Internet Explorer 6.0

2 answers

Answer 1 / 2
nico2048
 
Hello

same issue as you, impossible to access the convert menu

best regards
1
Answer 2 / 2
frizoune
 
Hello everyone. I had the same issue as you. To access the conversion, you need to reinstall PL7 with a custom installation. Just check PL7-2 and PL7-3 conversion options.
There you go. Happy continuing
P.S: make sure to reinstall the Unitelway updates afterwards if you are working with this protocol.
0