TV Sharp X plat

momo -  
hodiems Posted messages 1 Status Member -
Hello,

my Sharp television is stuck; my daughter was playing with it and touched something, now the screen is blue and shows a key with the message TV ACTIVE ENTER PASSWORD, and I noticed that a few minutes later it turns off by itself. I tried the code 0000 but it doesn't work. I have never activated the password.
I need help please.

1 answer

Miura564 Posted messages 14829 Registration date   Status Member Last intervention   1 560
 
Hi,

on a Sharp XFlat Slim 21" 21S-FX10A, it seems that you need to enter the code *2398* to change the password.

Have you looked in your manual? What is the exact model of your Sharp TV?
2
Miura564 Posted messages 14829 Registration date   Status Member Last intervention   1 560
 
Several methods to unlock your code, found here: https://www.fixya.com/support/t16778010-forgot_password_unlock_sharp_xflat_slim (thanks Google)

Method 1
Hold down MENU on the remote and VOLUME DOWN on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

Press the MENU button on the remote and VOLUME DOWN on the TV at the same time for 4 seconds. The code will be disabled

Method 2
Hold down the 0 on the remote and the VOLUME DOWN buttons on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

Press the "0" (zero) button on the remote and VOLUME DOWN on the TV at the same time for 4 seconds. The code will be disabled

Method 3
Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds

Press the MENU button on the front of the TV and the TV button on the remote at the same time for 4 seconds

Method 4
Hold down GO BACK on the remote and MENU on the front of the TV at the same time for at least 4 seconds.

Press the GO BACK button on the remote and the MENU button on the front of the TV at the same time for 4 seconds

Method 5
Hold down EJECT on the front of the TV and the MENU button on the remote at the same time for at least 4 seconds.

Press the MENU button on the remote and the EJECT button on the front of the TV at the same time for 4 seconds

Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.

It depends on the model of your TV. One of these methods should unlock the V-Chip. Now if you wish, you can change the settings on the V-Chip by going to the MENU section PARENTAL CONTROLS.
0
mathiasdls
 
Hello, I tried the methods mentioned above but none work. My TV is a Sharp xflat plus 29l-fg1a. My TV is still stuck on startup asking for a password that I don't know. Thank you for your help please.
0
Hodié
 
Thank you Miura564. After 7 months at the repair shop, your has just repaired my television.
0
hodiems Posted messages 1 Status Member
 
Thank you very much Miura564. After spending 7 months at the repair shop, your tip just relieved me. 2398

--
0