in the list you provided, yours is not included. Try connecting your printer with a USB cable, then open it as I explained above to see if it is recognized and eventually appears
-- A+ Mike-31
I am responsible for what I say, not for what you understand...
rosounette
Author
Thank you! I'll take the USB cable from my old HP printer then?
Select the link with the mouse https://support.hp.com/en-us/drivers/selfservice/hp-deskjet-2600-all-in-one-printer-series/12319824 Press Ctrl-C on your keyboard Open an internet browser Click in the URL box at the top of the browser Press Ctrl-V on your keyboard Confirm by pressing Enter Click on Get the Application and let it do its job until the installation is complete.
rosounette
Author
Thank you! I just sent a message to HP support via Messenger.
Mike-31
Re,
what's happening, have you gone to the HP website to download the driver
it's possible that your printer is installed but not set as default
in the Windows search bar at the bottom of the taskbar, type control panel
if the display is in Category mode, look for the Hardware and Sound folder and click on View devices and printers
in case the control panel is in icon view open the Devices and Printers folder
check if your printer is listed there if yes, right-click on your printer and click on Set as default printer, a small green checkmark will appear on your printer
-- See you soon Mike-31
I am responsible for what I say, not for what you understand...
rosounette
Author
When I open my control panel, there are several printers (4): fax, Microsoft Print to PDF, Microsoft XPS Document Writer, and OneNote for Windows 10... Which one is mine? Thank you.
rosounette
Author
Thank you very much! I was in "communication" with HP on Messenger! The driver is installed but I couldn't finish because they close at 6 PM.... I will do what you told me! Thanks again!
Mike-31
Hi,
so you connect your printer with your USB cable, then go to the Devices and Printers manager and click on add a printer, and you follow the procedure once it's done, make sure to set it as default as explained in a previous post
See you later Mike-31
I am responsible for what I say, not for what you understand...
rosounette
Author
I can't connect the USB cable from my old printer! It has 3 "ports" while my printer's cable only has 2!!
rosounette
Author
And yet it "works" because I turned it on and it printed out 2 pages: wireless Quick Start Guide .....but everything is written in English......pfffff I even got the alignment page that I need to scan but I don't know how to scan with this printer.....
rosounette
Author
Okay! I'll do that and keep you posted! Thanks!
Mike-31
How come there are two inputs? On all printers, you have a male power plug to receive a female socket and a USB output that is practically square-shaped, and that's it.
-- A+ Mike-31
I am responsible for what I say, not for what you understand...
rosounette
Author
I only have one output to this printer because it is "wireless."
Mike-31
So just yesterday I installed the same one, and if you look at the back you have the power outlet and a little higher, slightly to the right, you have the square USB output like any printer, and the HP Deskjet 2600 is no exception to this rule, even though it is Wifi.
Here’s the back of your printer, at the bottom center the power plug and the USB port marked with the arrow.
A+ Mike-31
I am responsible for what I say, not for what you understand...
rosounette
Author
Yes, it's a small black rectangle! What should I do with it? Thank you
Mike-31
Hi,
I explained everything to you; you just need to connect a USB cable between the printer and the computer. If you can't do it, consult a computer technician before doing anything silly. I will be off the forum for the day.
-- See you, Mike-31
I am responsible for what I say, not for what you understand...
rosounette
Author
Hello and thank you! I will take a picture of the back of my printer so that you can see that apart from the cord provided with the printer, I can't connect any other cables... have a good day and I'll keep you updated when you return! Thanks again!
rosounette
Author
Hello! I wanted to tell you that I called HP and finally my printer is working... however, I don't know how to scan the alignment page... Thanks again!