View original (French)

Boot USB UEFI on Lenovo G50-45 not working

Solved
jojol_8144 Posted messages 142 Status Member -  
jojol_8144 Posted messages 142 Status Member -
Hello,

I created a bootable USB drive using Microsoft's tool,

The installation went well, however, when I go into the BIOS, I see that my BIOS is set to boot from the USB, but it doesn't work, I still access the blue UEFI menu of Windows.

My BIOS:


What happens when I start the PC is always this:



What is the issue, please?

Thank you in advance

3 answers

  1.
    jojol_8144 Posted messages 142 Status Member 3
     
    Hello,

    Actually, I found the solution,

    I had to set it to legacy in the BIOS

    Thank you.
    1
    2. gugu01 Posted messages 15669 Registration date   Status Contributor Last intervention   4 702
       
      Hello,

      Your key was poorly made... as mentioned, it needed to be created in GPT and not MBR.
      It would have been seen and launched in UEFI = good installation.

      You just installed in legacy mode, which is a degraded mode from UEFI to the "old BIOS" version.
      Installation in this way is over 10 years old.
      It's a shame, since you are at the beginning, I would strongly advise you to reinstall correctly to take advantage of UEFI, the current standard for a long time now.
      0