View original (French)

Fujitsu Siemens D3041-A11 GS3 motherboard connections

Solved
tuyauteur56 Posted messages 15 Status Member -  
tuyauteur56 Posted messages 15 Status Member -
Hello,
I just changed my used motherboard and I'm having trouble connecting the power on, power off, hard drive reset, and HP cables to the motherboard with the colored connectors that have no labels.
I would like to know how to identify them and where to connect each one.
Best regards, thank you
My email is gilles.stocklin@laposte.net
I took a screenshot of the connectors.

2 answers

  1.
    tuyauteur56 Posted messages 15 Status Member 1
     
    image of connectors https://www.zupimages.net/viewer.php?id=15/20/i3b6.jpg
    2
    1. zetnot Posted messages 1160 Status Member 122
       
      Hello,
      could you take a larger photo, in macro if possible and from above, to see the inscriptions?
      I'm not sure, but the connections might be standardized?
      I'll check with mine.
      See you!
      0
      1. tuyauteur56 Posted messages 15 Status Member 1 > zetnot Posted messages 1160 Status Member
         
        Hello
        I found something
        https://www.zupimages.net/viewer.php?id=15/20/dxun.jpg
        my wires
        hdd led white orange
        power led white blue
        power sw green black
        reset white black the black recovery switch is not in its place at first glance
        thank you for your help
        0
      2. tuyauteur56 Posted messages 15 Status Member 1 > tuyauteur56 Posted messages 15 Status Member
         
        Thank you, I found the solution. I will put an image with the solution.
        -1
  2. tuyauteur56 Posted messages 15 Status Member 1
     
    Hello,
    thank you for responding, there is no registration, the only registration is Fujitsu.
    thank you
    0