J'ai un probleme avec mon arduino uno

Fermé
ukulele1 Messages postés 11 Date d'inscription samedi 24 janvier 2015 Statut Membre Dernière intervention 11 mars 2016 - 8 avril 2015 à 17:59
bonjor
je n'arrive pas à transférer un programme vers mon arduino voici le message d'erreur Arduino :
1.6.3 (Windows 8.1), Carte : "Arduino Uno"

Le croquis utilise 1 030 octets (3%) de l'espace de stockage de programmes. Le maximum est de 32 256 octets.

Les variables globales utilisent 9 octets (0%) de mémoire dynamique, ce qui laisse 2 039 octets pour les variables locales. Le maximum est de 2 048 octets.

avrdude: ser_open(): can't open device "\\.\COM1": Accès refusé.




Problème de téléversement vers la carte. Voir https://support.arduino.cc/hc/en-us#upload pour suggestions.

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x50

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x50

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x50

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x50

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x50

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x50

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x50

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x50

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x50

avrdude: stk500_recv(): programmer is not responding

avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x50

Problème de téléversement vers la carte. Voir https://support.arduino.cc/hc/en-us#upload pour suggestions.

Ce rapport contiendrait plus d'informations si l'option
"Montrer les informations de sortie pendant la compilation"
était activée dans Fichier > Préférences.

pourriez vous me dire ce qui se passe
merci
d'avance