Toshiba Satellite C850 - 1KX USB Boot Issue
Solved
flog73
Posted messages
222
Status
Member
-
Dydddyyy -
Dydddyyy -
Hi everyone,
I have a little problem booting from a USB stick with this PC.
Let me explain, a friend dropped this PC and it wouldn't start normally anymore. He asked me to install Windows 7 instead of 8 after I retrieved some data for him.
The hard drive is working as I was able to copy what he wanted to recover using Testdisk.
I created a bootable USB stick to install Windows 7, but when I go into the BIOS (the BIOS is an InsydeH20 rev 3.7), it doesn't detect my USB stick in the boot tab; there is indeed USB, but no hardware reference follows.
I tried all the USB ports on the PC and it doesn't work...
Do you know how to fix this issue?
Thanks in advance,
Flo.
Configuration: Windows 7 / Chrome 33.0.1750.154
I have a little problem booting from a USB stick with this PC.
Let me explain, a friend dropped this PC and it wouldn't start normally anymore. He asked me to install Windows 7 instead of 8 after I retrieved some data for him.
The hard drive is working as I was able to copy what he wanted to recover using Testdisk.
I created a bootable USB stick to install Windows 7, but when I go into the BIOS (the BIOS is an InsydeH20 rev 3.7), it doesn't detect my USB stick in the boot tab; there is indeed USB, but no hardware reference follows.
I tried all the USB ports on the PC and it doesn't work...
Do you know how to fix this issue?
Thanks in advance,
Flo.
Configuration: Windows 7 / Chrome 33.0.1750.154
4 answers
-
Re hello,
I solved my problem, actually it’s a BIOS "UEFI". I'm not sure if this is the BIOS that’s called that, anyway let’s move on... From what I understood, these BIOS have a security feature that prevents booting from an external system, so you have to disable this feature to be free to boot wherever you want.
- First, you need to access the BIOS (F2 key for me)
- Go to the "Security" tab using the right and left arrows
- In the "HDD/SSD Password" section:
The mode should be set to [User] press enter and choose [Master+User]
- Then go to the "Advanced" tab
- At the bottom, "System Configuration" press Enter.
- Select "Boot Mode" which should be set to [UEFI Boot] press Enter and choose [CSM Boot]
- Press the escape key once to return to the "Advanced" tab.
- Go to the "Boot" tab, which is on the right, second to last before "Exit".
- Finally, using the F5 and F6 keys, configure your boot order as you wish. If the USB key is recognized and the hardware reference appears, you’re good to go!
- Press F10, answer "Yes" and the PC will restart
It worked for me after looking for a while, I admit...
Flo -
-
Hello,
I followed the procedure outlined above, but unfortunately, I cannot access "Boot mode" because it is grayed out!
Does anyone have any ideas? -